• The Korean Journal of Gastroenterology
• /
• v.72 no.5
• /
• pp.229-236
• /
• 2018

Accurate diagnosis of Helicobacter pylori (H. pylori) infection is mandatory for the effective management of many gastroduodenal diseases. Currently, various diagnostic methods are available for detecting these infections, and the choice of method should take into account the clinical condition, accessibility, advantage, disadvantage, as well as cost-effectiveness. The diagnostic methods are divided into invasive (endoscopic-based) and non-invasive methods. Non-invasive methods included urea breath test, stool antigen test, serology, and molecular methods. Invasive methods included endoscopic imaging, rapid urease test, histology, culture, and molecular methods. In this article, we provide a review of the currently available options and recent advances of various diagnostic methods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.959-961
• /
• 2011

Manure-based composts can have detrimental effects on the agricultural lands and crops if they are applied without proper stabilization process. Composting is well-known method for the stabilization of manure-based composts and the extent of composting could be examined by maturity test. Among various methods to examine compost maturity, the performances of two mechanical methods (Solvita and CoMMe-100) were examined and the test results were compared with seed germination test. The mechanical methods are considered to be simple and relatively objective. Also they are cost- and time-efficient. Ten commercially available composts collected in Korea were used for this study. Basically, the maturity determined with these mechanical methods was in good agreement with the seed germination test. However, it appeared that the index levels of compost maturity indicated more maturity by CoMMe-100 than Solvita for the same compost. The differences between maturity index levels determined by both methods were able to be minimized through extending the reaction time for CoMMe-100 and adjusting index level for maturity determination in the standard color chart.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.4
• /
• pp.49-55
• /
• 2010

1. Objectives The purpose of this study is to assess the statistical methods used in the Journal of Sasang Constitutional Medicine and to identify the types of errors in the statistical analysis. 2. Methods We have reviewed quantitative articles published in the Journal of Sasang Constitutional Medicine from 2000 to 2009. Except for the case report, a total of 505 articles was reviewed by year. We focused on the methods of statistics in these articles. We have analysed the number of thesis used the statistical methods, the number of the statistical methods, the types of the statistical methods, and the errors of the statistical methods with the object of 202 thesis used the statistical method. 3. Results 1. Of the 370 articles, 202 used inferential statistics. 2. The most dominant was the thesis with one type of the statistical method forming 61.9% (125 thesis) of the total. 3. The ANOVA was the statistic of choice overall (40.1%), followed by the t-test (35.6%). 4. By examining the errors of the statistical methods, there were 49 thesis with errors among 81 thesis using ANOVA, 25 thesis among 72 thesis using t-test, and 18 over 62 thesis using chi-squared test. 4. Conclusions We have found various mistakes or misuses in the applications of statistical methodologies in the articles published in the Journal of Sasang Constitutional Medicine. It is necessary to present the cases of inappropriate statistical methods in order to improve the quality of academic researches. So long as Sasang constitutional medicine uses the statistical methods, researchers should fully examine and be aware of the statistical methods which they wish to use through other research articles, and statistic publications.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.393.1-393
• /
• 2002

Offices and other multipurpose buildings commonly have suspended ceilings installed over room dividing wall. But Korean Standards don't include any code on test methods and test facility of the suspended ceiling system. Therefore, test methods and test facility from ISO and ASTM have been used for evaluating sound performance in domestic so far. In this study, Korean Standards draft on test methods and test facility of suspended ceiling system and materials is proposed on the basis of ISO and ASTM.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.277-283
• /
• 2015

Background: Foodborne disease outbreaks from various food sources are a major health concern worldwide. Current methods for detection of foodborne pathogens are both expensive and time-consuming. Purpose: This review aims to present the current information available on the use of lateral flow test strips to detect pathogens in food products to enhance food safety. Results: Frequent foodborne disease outbreaks from various food sources have increased the need for rapid and easy methods for routine analysis of foodborne pathogens. Present detection methods for foodborne pathogens require expensive instruments, experts, and long time for sample analysis. Lateral flow test strips have drawn attention in recent years because of their ability to detect analytes quickly and easily. This review focuses on the principle of the lateral flow test, the various formats of lateral flow test strips, recognition elements, labeling tags, and reading instruments. In addition, this review also discusses the future prospects for the lateral flow test strips.

• Journal of the Korean Society for Railway
• /
• v.7 no.1
• /
• pp.32-36
• /
• 2004

Aluminum carbody for rolling stocks is light and perfectly recycled, but includes severe defects which are very dangerous to fatigue strength. Static load test has been performed up to date to assess structural safety of the carbody. However, static load test is not sufficient to evaluate fatigue strength of the carbody, because fatigue failure is caused by dynamic load. In this study, the established load test methods for carbody are described and the characteristics of the methods are discussed. Also, a testing method to simulate dynamic loading condition is proposed for evaluation of fatigue strength of the carbody. The results by the proposed testing method are compared with the results by the static load test and new findings are discussed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.562-568
• /
• 1998

Various diagnostic methods, such as electric pulp test, cold test, test cavity etc., have been used to determine the pulp vitality. At least two or more methods should be used with supplemental information to diagnose each case because using one method doesn't provide sufficient accuracy. These conventional methods have depended on nervous responses, but Laser Doppler Flowmeter determines the pulp vitality by measuring pulpal blood flow. In this case, we tested the vitality of the traumatized teeth with incomplete root apices and autotransplanted teeth with conventional methods and Laser Doppler Flowmeter. Conventional methods, such as electric pulp test and cold test can produce various responses according to the development state of the pulpal nerve and the sensory threshold of the patient. But, Laser Doppler Flowmeter has a lower false response rate than any other pulp vitality test methods and it can determine the vitality somewhat earlier than the other method.

• The International Journal of Costume Culture
• /
• v.4 no.3
• /
• pp.241-248
• /
• 2001

Re water resistance of shell fabrics intended for we in outdoor apparel was measured using three different standard test methods, ASTM D 751, hydrostatic resistance, procedure A(Mullen test -- with and without a fabric support) and Procedure B (Hydrostatic head test). A database of information on their water resistance performance was created. The data collected with different methods were correlated and the advantages and disadvantages of each method were compared. The Mullen test with a support appears to give higher and more favorable water resistance values on shell fabrics preventing fabric rupture during the test. The hydrostatic head test gave lower hydrostatic pressure values than those measured on the two Mullen tests. The Mullen test is recommended for testing the water resistance of fabrics that high a relatively high water resistance because the Mullen tester applies a wide range of pressure. The hydrostatic head test is recommended for testing the fabrics that have relatively low water resistance. The area of the fabric sample that is in contact with the water is smaller in the Mullen test, so higher pressure levels can be reached and more samples should probably be tested to get a representative value for each fabric types. Furthermore, the hydrostatic head test was deemed more repeatable than the Mullen tests in his study.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.465-469
• /
• 2006

Pre-treatment methods to determine various heavy metal contents in packaging papers were investigated by ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods utilized in this study include dry ashing and decomposition methods ($HNO_{3-}HClO_{4-}HF,\;HNO_{3},\;and\;H_{2}SO_{4-}HNO_{3}$). They were compared with the conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrument. In case of Cr and Pb, the migration test is considered to be a better method compared to the extraction test, but all pretreated methods showed much higher detection efficiency than the extraction or migration test. However, the detection ratio between the migration test and decomposition methods was different. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method. Concerning Pb, the sulfuric acid - nitric acid method showed a low detection efficiency compared to other decomposition methods. The sulfuric acid - nitric acid method is, thus, not considered to be a suitable analysis method for Pb in packaging papers.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.56-64
• /
• 2013

An Eectrolytic Corrosion(EC) test method was evaluated by the comparison with Copper Accelerated Acetic Salt Spray(CASS) and Neutral Salt Spray(SS) tests. Those methods were applied in order to evaluate corrosion resistance of Ni-Cr plated and Zn-plated Fe substrates. The correlations between results obtained by different test methods were investigated. Results showed that the electrochemical method such as the EC test method was superior to the conventional methods such as CASS and SS, in terms of the quantitative accuracy and the test-time span. Furthermore, the EC test method provided the useful means to estimate the initiation of corrosion of each layer by monitoring the rest potentials of the coated layers such as Ni, Cr, and Zn on Fe substrate. With regard to test time spans, the EC test provided the 78 times and 182 times faster results than the CASS test in cases of $Fe+5{\mu}m$ $Ni+0.5{\mu}m$ Cr and $Fe+20{\mu}m$ $Ni+0.5{\mu}m$ Cr respectively, while the EC test was 85 times faster results than the Salt Spray test in the case of $Fe+20g/m^2$ Zn. Therefore, the EC test can be the better method to evaluate the resistance to corrosion of coated layers than the conventional methods such as the SS test and the CASS.