• Computers and Concrete
• /
• 제2권5호
• /
• pp.367-380
• /
• 2005

Recent earthquakes have shown that many of existing buildings in Iran sustain heavy damage due to defective seismic details. To assess vulnerability of one common type of buildings, which consists of low rise framed concrete structures, three defective and three standard columns have been tested under reversed cyclic load. The substandard specimens suffered in average 37% loss of strength and 45% loss of energy dissipation capacity relative to standard specimens, and this was mainly due to less lateral and longitudinal reinforcement and insufficient sectional dimensions. A relationship has been developed to introduce variation of plastic length under increasing displacement amplitude. At ultimate state, the length of plastic hinge is almost equal to full depth of section. Using calibrated hysteresis models, the response of different specimens under two earthquakes has been analyzed. The analysis indicated that the ratio between displacement demand and capacity of standard specimens is about unity and that of deficient ones is about 1.7.

• 한국지반신소재학회논문집
• /
• 제9권3호
• /
• pp.9-18
• /
• 2010

토목섬유보강 성토지지말뚝시스템에서의 하중전이 특성을 규명하기 위하여 일련의 모형실험을 실시하였다. 모형토조에 단독캡 말뚝을 설치하고, 토목섬유를 포설한 후 성토를 실시하였다. 연약지반 대체재료로서 스펀지고무를 사용하였다. 실험결과 성토지지말뚝시스템의 효율은 일정한 말뚝간격비에서는 성토고가 증가할수록 비선형적으로 증가하여 이후 일정한 값에 수렴하는 경향을 나타내었다. 또한 성토고가 일정한 조건에서는 말뚝간격비가 증가할수록 효율의 크기는 감소하였다. 토목섬유를 보강한 경우, 무보강시와 비교하여 말뚝으로 전이되는 하중이 증가하는 것으로 나타났다. 이는 토목섬유의 보강이 연약지반의 거동을 억지하는데 효과가 있음을 나타내는 것이다. 결국 토목섬유보강 성토지지말뚝시스템에서의 하중전이 특성은 말뚝캡 설치간격, 성토고, 지반의 강도정수 및 토목섬유 강성 등에 복합적으로 영향을 받음을 알 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.513-518
• /
• 1997

In this study, nine reinforced concrete infilled frames involved bare frames were tested during vertical and cyclic loads simultaneously. This test programs were carried to investigate the horizontal strength and the crack propagation in variance with hoop reinforcement ratio. All specimens were modeling in one-third scale size. In this experimental program structural performance of reinforced concrete shear wall were focus at connection types. Based on the test results, the following conclusions are made. In the boundary column member of reinforced concrete shear wall, increasing the ratio of hoop bar in two or three times, in the fully babel type, the shear and horizontal strength of specimens were increased 1.1-1.2 times than that of fully rigid frame. And infilled shear wall specimen were increased 1.17-1.27 times than that. Fully rigid babel type shear wall specimens were increased 5.7~8.0 times, and infilled shear wall specimens were increased about 4.0~5.6 times than that of infilled shear wall specimens.

• 한국농공학회지
• /
• 제31권2호
• /
• pp.66-81
• /
• 1989

The characteristics of resilient modulus(Mr) which dominates the life of pavement and the design of pavement were investigated on the test specimens which were cement treated and non-treated of the three different soil types. The results are summarized as follows : 1. The resilient modulus was decreased by increasing the cyclic deviator stress ($\sigma$d) , especially the resilient modulus was gradually decreased or sometimes increased when the value of ad was greater than 0.75- 1. 0kg/cm$^2$. 2. The resilient modulus was increased by increasing the homogeneous confined stress ($\sigma$do) and such phenomena were distinct on the coarse soils. 3. The resilient modulus was increased by increasing the ratio of confined stress(Kc), and this phenomena were eminent on the coarse soils too, and the higher permanent strain was showed by increasing the value of Kc. 4. In the drained cyclic triaxial compression test, the value of ad, Kc, and (Oho) was introduced by the following interrelated equations which were similar to the Mr model of Cole. Kcn/Mr=K1(J$_2$/ $\tau$oct)K2 ............. (coarse soli) Mcn/Mr=K3($\sigma$dp/ $\tau$f)k4 ...............(fine soils) 5. The stress path was not much affected by the value of Mr, however, moisture content, dry desity, and contant of fines affected the value of Mr. 6. In the soil-cement specimens, the resilient compression strain($\varepsilon$d) was decreased by the increment of the $\sigma$ho, and Mr was decreased by increasing the $\sigma$d 7. In the flexible pavement. the cement treated layer should be designed not to fail by the fatigue before the designed traffic load, and actually the pavement could cover the traffic load to a certain extent under the post-crack phase, therefore farther studies on this phenomena' are required in the design analysis. 8. The finite element computer program (ANALYS) was used for displacement analysis of pavement containing the cement-treated layer, The result showed that the program used for this analysis was proved to be usable.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.121-125
• /
• 2007

LCVA has an advantage that its natural frequency can be easily controlled by changing the area ratio of the vertical column and horizontal part. The previous studies investigated the dynamic characteristics of the LCVA under harmonic load. This study experimentally obtained the first and second mode natural frequencies of the LCVA from shaking table tests using white noise and compared the values with the ones by previous study. Test results show that the measured first mode natural frequency of the LCVA is larger than the calculated one when the area ratio is larger than 1. The second mode frequency increases with the increasing area ratio, which is due to the sloshing motion effect resulting from the large area of the vertical column.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.189-197
• /
• 2002

개단말뚝의 지지력은 말뚝의 폐색정도에 영향을 받으며, 이러한 폐색정도는 관내토증분비인 IFR에 의하여 정량화 될 수 있다. 그러나 말뚝의 폐색정도가 말뚝의 지지력에 미치는 영향을 정확하게 고려하는 개단말뚝의 지지력 산정기준이 현재까지 없는 실정이다. 따라서 말뚝의 폐색정도가 지지력에 미치는 영향을 조사하기 위하여 계측기가 부착된 모형 개단말뚝과 가압토조를 이용해서 모형말뚝시험을 수행하였다. 시험결과 개단말뚝의 IFR은 말뚝의 관입깊이에 대한 관내토길이의 비로 정의되는 관내토길이비(PLR)로부터 예측이 가능함을 알 수 있었다. 그리고 개단말뚝의 선단 지지력과 주면마찰력은 말뚝의 IFR이 증가함에 따라 감소하는 경향을 보였다. 또한 이와 같은 모형말뚝시험의 결과에 근거하여 개단말뚝의 선단지지력과 주면마찰력을 산정할 수 있는 새로운 지지력산정식이 제안되었다.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.13-20
• /
• 2022

본 연구에서는 바렛말뚝의 형상비 및 말뚝 주변 지반 강성 변화가 주면마찰력에 미치는 영향을 분석하였다. 유한요소 프로그램을 활용하여 부산 OO현장의 바렛말뚝 정재하시험 결과를 역해석 하였으며 이를 바탕으로 형상비 및 말뚝 주변 지반의 강성을 달리하여 총 36개의 수치해석을 수행하였다. 그 결과, 바렛말뚝의 형상비가 커질수록 주면마찰력은 증가하였으며 극한상태에 다다를수록 그 영향이 커짐을 확인할 수 있었다. 또한 말뚝 주변 지반 강성 변화에 따른 형상비 및 주면마찰력의 상관관계를 분석하였다.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.297-304
• /
• 2012

블레이드의 성능 평가를 위하여 실제 사용 환경과 근접한 하중 모사에 따른 이축 하중의 필요성이 제기되고 있으며, 본 본문에서는 이러한 이축 하중에 따른 블레이드의 거동을 해석하였다. 100kW급 풍력 블레이드를 대상으로 하였으며, ANSYS를 사용하여 정적거동을 분석하였다. 정적거동은 파손해석과 좌굴거동으로 분석하였으며, 파손 평가는 Puck이 제안한 파손 방정식을 이용하여 섬유 파손과 섬유간 파손 기준을 검토하였다. 이축하중의 하중비가 증가함에 따라 루트부 단면이 변하는 후연부와 루트에서 Z+ 3300~3600인 지점에서 응력이 상대적으로 크게 나타났다. 또한 이축 하중비가 증가함에 따라 블레이드 좌굴 지점이 루트부 쪽으로 이동되고 있음을 확인하였다. 따라서 블레이드의 사용 신뢰성을 검증하기 위해서는 이축 하중에 의한 시험이 요구되고 있음을 본 해석을 통해서 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.167-172
• /
• 2008

This study is to evaluate the fatigue crack growth characteristics for base metals and welded metal of 9% Ni steels. Since this material has very excellent fracture toughness at low temperature, it has been widely used for inner walls of LNG storage tank. These materials to compare fatigue crack growth (FCG) behaviour are treated with heat by the method of quenching and tempering (QT), and quenching, lamellarizing and tempering (QLT). FCG tests using compact temsion (CT) specimen under stress ratio R=0.1, 0.5, and constant load are carried out. K-increasing tests are conducted by the standard test method described in ASTM E 647. To investigate the effect of welded metal on the crack growth rate, the locations of notch tip were chosen at the center of welded metal and heat affected zone (HAZ). Form the results, FCG rate has almost same tendency according to stress ratio, base and welded metal, the locations of welded metal. FCG rate of welded metal is somewhat faster than base metal. Also scanning electron microscope (SEM) is used to observe the striation of the fractured surface after fatigue crack tests.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.93-115
• /
• 2016

A particle tuned mass damper (PTMD) system is the combination of a traditional tuned mass damper (TMD) and a particle damper (PD). This paper presents the results of an experimental and analytical study of the damping performance of a PTMD attached to the top of a benchmark model under wind load excitation. The length ratio of the test model is 1:200. The vibration reduction laws of the system were explored by changing some system parameters (including the particle material, total auxiliary mass ratio, the mass ratio between container and particles, the suspending length, and wind velocity). An appropriate analytical solution based on the concept of an equivalent single-unit impact damper is presented. Comparison between the experimental and analytical results shows that, with the proper use of the equivalent method, reasonably accurate estimates of the dynamic response of a primary system under wind load excitation can be obtained. The experimental and simulation results show the robustness of the new damper and indicate that the damping performance can be improved by controlling the particle density, increasing the amount of particles, and aggravating the impact of particles etc.