Journal of the Korean Geosynthetics Society (한국지반신소재학회논문집)

Korean Geosynthetics Society (한국지반신소재학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical Evaluation of Skin Friction of Barrette Piles by Aspect Ratio and Soil Strength Changes

바렛말뚝의 형상비와 지반 강성에 따른 주면마찰력의 수치해석적 평가

  • Received : 2022.10.28
  • Accepted : 2022.12.08
  • Published : 2022.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, the effect of aspect ratio and soil strength on the skin friction for barrette pile was evaluated using numerical analysis. The back analysis was conducted to obtain the friction coefficient between pile and soil using the experimental results of the static pile load test for the barrette pile installed at OOsite in Busan. A total of 36 simulations for the static pile load test were also conducted with respect to various aspect ratios and soil strengths. It was found that the skin friction increases as the aspect ratio increases and the change in increasing rate was remarkable near the ultimate skin friction. In addition, the effect of aspect ratio on the skin friction was investigated when the strength of soil at pile tip was varied.

본 연구에서는 바렛말뚝의 형상비 및 말뚝 주변 지반 강성 변화가 주면마찰력에 미치는 영향을 분석하였다. 유한요소 프로그램을 활용하여 부산 OO현장의 바렛말뚝 정재하시험 결과를 역해석 하였으며 이를 바탕으로 형상비 및 말뚝 주변 지반의 강성을 달리하여 총 36개의 수치해석을 수행하였다. 그 결과, 바렛말뚝의 형상비가 커질수록 주면마찰력은 증가하였으며 극한상태에 다다를수록 그 영향이 커짐을 확인할 수 있었다. 또한 말뚝 주변 지반 강성 변화에 따른 형상비 및 주면마찰력의 상관관계를 분석하였다.

Keywords

References

  1. Abaqus (2021), Abaqus/CAE User's Manual, Version 6.11, Dassault Systemes Simulia Corp, Providence, RI, USA.
  2. Abbas, J. M., Chik, Z. and Taha, M. (2008), "Single pile simulation and analysis subjected to lateral load", The Electronic Journal of Geotechnical Engineering.
  3. ASTM (2020), Standard Test Methods for Deep Foundations Elements Under Static Axial Compressive Load, D1143/D1143M-20, ASTM International, West Conshohocken, Pa, USA.
  4. BGL (2013), Report of load tests for Cast in-place pile(Site: Construction Documents for Busan-Gimhae LRT Public-private partnership), Busan-Gimhae Light Rail Transit Co., Ltd., Gimhae, Korea.
  5. Bowles, J. E. (1996), Foundation Analysis and Design, McGraw Hill Book Co., New York, pp.219-280.
  6. Chang, D. W., Huang, D. W., Lin, Y. K., Lu, F. C., Kuo, C. J. and Zhussupbekov, A. (2022), "Length Influences on Lateral Performance of Barrette from Three-Dimensional Finite Element Analysis", Journal of Applied Science and Engineering, Vol.25, pp.677-691
  7. Conte, E., Troncone, A. and Vena, M. (2013), "Nonlinear three-dimensional analysis of reinforced concrete piles subjected to horizontal loading", Computers and Geotechnics, Vol.44, pp.123-133. https://doi.org/10.1016/j.compgeo.2012.10.013
  8. Das, B. M. (1984), Principle of Foundation Engineering, Brooks/cole Engineering Division, Montrey California, pp.242-263.
  9. Hong, Y. S., Yoo, J. W., Kang, S. K., Choi, M. B. and Lee, K. I. (2019), "A numerical study on the estimation method of the results of static pile load test using the results of bi-directional pile load test of barrette piles", J. Korean Geosynthetics Society, Vol.18, No.1, pp.39-53. https://doi.org/10.12814/JKGSS.2019.18.1.039
  10. Hsu, M. C., Yu, C. H. and Chen, C. H. (2017), "Case studies for side resistance of barrette piles using results of ultimate load tests", Journal of GeoEngineering, Vol.12, No.2, pp.65-79.
  11. KS (2022), Test method for piles under static axial compressive load, KS F 2445:2022, KATS, Korea.
  12. Poulos, H. G., Chow, H. S. W. and Small, J. C. (2019), "The Use of Equivalent Circular Piles to Model the Behaviour of Rectangular Barrette Foundations", Geotehnical Engineering Journal of the SEAGS&AGSSEA, Vol.50, No.3, pp.106-109.
  13. Rafa, S. A. and Moussai, B. (2018), "Three-Dimensional Analyses of Bored Pile and Barrette Load Tests Subjected to Vertical Loadings", Soil Mech Found Eng, Vol.55, No.3, pp.146-152. https://doi.org/10.1007/s11204-018-9518-0
  14. Seo, Y. S., Yun, H. S., Kim, D. G. and Kwon, O. I. (2016), "Analysis on Physical and Mechanical Properties of Rock Mass in Korea", The Journal of Engineering Geology, Vol.26, No.4, pp.593-600. https://doi.org/10.9720/KSEG.2016.4.593
  15. Terzaghi, K. and Peck, R. B. (1967), Soil Mechanics in Engineering Practice. 2nd Edition, John Wiley, New York.
  16. Zhang, L. M. (2003), "Behavior of Laterally Loaded Large-Section Barrettes", Journal of Geotechnical and Geoenvironmental Engineering, Vol.129, No.7, pp.639-648. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:7(639)