• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.201-204
• /
• 2006

It should be noted that the critical chloride threshold level is not considered to be a unique value for all conditions. This value is dependent on concrete mix proportions, cement type and constituents, presence of admixtures, environmental factors, reinforcement surface conditions, and other factors. In this study, the accelerated corrosion test for reinforcing steel was conducted by electrochemical and cyclic wet and dry seawater method, respectively and during the test, corrosion monitoring by half-cell potential method was carried out to detect the time to initiation of corrosion for individual test specimen. For this purpose, lollypop and right hexahedron test specimens were made for 31%, 42%, and 50% of W/C, respectively, and then the accelerated corrosion test for reinforcing steel was executed. It was observed from the test that the time to initiation of corrosion was found to be different with the water-cement ratio and accelerated corrosion test method, respectively and the critical chloride threshold values were found to range from 0.91 to $1.47kg/m^3$.

• Wind and Structures
• /
• v.30 no.2
• /
• pp.199-210
• /
• 2020

Building wind pressure coefficient transiting test is a new method to test the building wind pressure coefficient by using the wind generated by a moving vehicle, which is susceptible to natural wind and other factors. In this paper, the Commonwealth Advisory Aeronautical Research Council standard model with a scale ratio of 1:300 is used as the test object, and the wind pressure coefficient transiting test is repeated under different natural wind conditions to study the influence of natural wind. Natural wind is measured by an ultrasonic anemometer at a fixed location. All building wind pressure coefficient transiting tests meet the test conditions, and the vehicle's driving speed is 72 km/h. The mean wind pressure coefficient, the fluctuating wind pressure coefficient, and the correlation coefficient of wind pressure are used to describe the influence of natural wind on the building wind pressure coefficient transiting test qualitatively and quantitatively. Some rules, which can also help subsequent transiting tests, are also summarized.

• Biomolecules & Therapeutics
• /
• v.4 no.3
• /
• pp.224-231
• /
• 1996

DA-5018, a non-narcotic analgesic agent, was examined for mutagenicity in the reverse mutation test on bacteria, chromosomal aberration test on cultured mammalian cells and micronucleus test on mice. The reverse mutation test was performed by a plate incorporation method with or without a metabolic activation system(S9 mix) using Salmonella typhimurium strain TA100, TA1535, TA98 and TA1537. DA-5018 did not significantly increase revertant colonies in any of the test strains under any conditions at concentrations ranging from 0.0049 to 1.25 mg/plate, compared with the vehicle control. In the chromosomal aberration test using cultured Chinese Hamster Lung(CHL) cells, DA-5018 did not increase the number of aberrant cells in the presence or absence of S9 mix at concentrations of 0.016 mM/plate to 0.25 mM/plate, compared with the vehicle control. In the micronucleus test, male ICR mice were given DA-5018 intraperitoneally at a dose level of 0.55, 1.10 and 2.20 mg/kg. The incidence of bone marrow micronucleated polychromatic erythrocytes in the DA-5018 treated mice was not significantly different from that of the vehicle control. These results indicate that DA-5018 does not have mutagenic potential under the present test conditions.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1051-1059
• /
• 2008

In the development process of an ECU (Electrical Control Unit), numerous tests are necessary to evaluate the performance and control algorithm. The vehicle based test is expensive and requires long time. Also, it is difficult to guarantee the safety of the test driver. To overcome the various problems faced in the development process, the ECU test has been done using HIL (Hardware In the Loop). The HIL environment has the actual hardware including an ECU and a virtual vehicle model. In this paper, the test platform environment is devloped for the AWS ECU black box test. The test platform is built on HIL (Hardware In the Loop) architecture. Using the developed test platform, the control algorithm of the AWS ECU can be evaluated under the virtual driving condition of the bi-modal tram. Driving conditions, such as a front steering angle and vehicle velocity, are defined through the PC (Personal Computer) input. Input signals are transformed to electrical signals in the PC. These signals become the input conditions of the AWS ECU. The AWS ECU is stimulated by arbitory input conditons, and responses of the system are observed.

• Biomolecules & Therapeutics
• /
• v.3 no.4
• /
• pp.294-300
• /
• 1995

DA-3002, an authentic recombinant human growth hormone(rhGH), was examined for mutagenicity in the reverse mutation test on bacteria, in the chromosomal aberration test on cultured mammalian cells and in the micronucleous test on mice. The reverse mutation test was performed by a plate incorporation method with or without a metabolic activation system(S9 Mix) using Salmonella typhimurium strain TA100, TA1535, TA98 and TA1537. DA-3002 did not significantly increase revertant colonies in any of the test strains under any conditions at dose levels ranging from 0.0125 to 0.4 IU/plate, compared with the vehicle control. In the chromosomal aberration test using cultured Chinese hamster lung(CHL) cells, DA-3002 did not increase the number of aberrant cells in the presence or absence of S9 mix at concentrations of 0.0125 IU/mι to 0.4 IU/mι, compared with the vehicle control. In the micronucleus test, male ICR mice were given DA-3002 intraperitoneally at a dose level of 20, 40 and 80 lU/kg. The incidence of bone marrow micronucleated polychromatic erythrocytes in the DA-3002 treated mice did not differ from that of the vehicle control. These results indicate that DA-3002 doesn't have mutagenic potential under the present test conditions.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.137-143
• /
• 2011

Fuel Test Loop(FTL) is a facility which could conduct a fuel irradiation test at HANARO(High-flux Advanced Neutron Application Reactor). FTL simulates commercial NPP's operating conditions such as the pressure, temperature and neutron flux levels to conduct the irradiation and thermo-hydraulic tests. The In-Pile Test Section(IPS) installed in HANARO FTL is designed as a pressure vessel design conditions of $350^{\circ}C$, 17.5MPa. The instrumentation MI-cables for thermocouples, SPND and LVDT are passed through the sealing plug, which is in the pressure boundary region and is a part of instrumentation feedthrough of MI-cable. In this study, the brazing method and performance test results are introduced to the sealing plug with BNi-2 filler metal, which is selected with consideration of the compatibility for the coolant. The performance was verified through the insulation resistance test, hydrostatic test, and helium leak test.

• Journal of Aerospace System Engineering
• /
• v.6 no.3
• /
• pp.34-39
• /
• 2012

In this paper, analysis of airworthiness requirements which require flight test to show compliance and flight test method as means of compliance to those requirements are provided. For unusable fuel test, sufficient discussion between certification authority and applicant is required to select test conditions. For hot weather fuel system operation test, preservation and heating of test fuel should be done carefully not to adversely affect to test result.

• Journal of Aerospace System Engineering
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2011

On this study, applicable aircraft pitot-static system airworthiness requirements and flight test techniques for PEC(Position Error Correction) to KAS Part 23 airworthiness standards are introduced. Also, pros and cons, applicable test conditions, test procedures and required test parameters of each flight test techniques are reviewed on this study.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.407-413
• /
• 2014

PURPOSE: We investigated the influence of heel insole and visual control on body sway index with high-heeled shoes. METHODS: The subjects of this study were 61 healthy students. None of the participants had any orthopedic or neurologic alterations. C90 area, C90 angle, trace length, sway average velocity were measured using a force plate by BT4. The variables were measured both with insole and without insole when wearing high-heeled shoes under the conditions of eyes open and eyes closed. The collected data were analyzed using the Kolmogorov-Smirnov test and paired t-test. RESULTS: When wearing high-heeled shoes with insole under the conditions of eyes open, trace length, C90 area, velocity were significantly more decreased than without insole (p<.01). When wearing high-heeled shoes with insole under the conditions of eyes closed, only C90 area was significantly more decreased than without insole (p<.05). When wearing high-heeled shoes with insole under the conditions of eyes open, trace length, C90 area, velocity were significantly more decreased than under the conditions of eyes closed (p<.01). CONCLUSION: The present study demonstrates that the use of high-heeled shoes with insole supported from heel to midfoot more increased static balance than without insole under the conditions of eyes open.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.24-32
• /
• 1994

This paper is the experimental study on the vibration reduction of the 4WD vehicle through the change of the engine mounting conditions.(4 stroke diesel engine) The engine mounting conditions are changed to reduce the transmitted vibrations of the engine to the frame at the idle speed. Under the assumption that the Powertrain(Engine Transmission and Transfer Case) is a rigid body, the inertia properties of the powertrain are obtained by experimental modal analysis. And then the changed mounting conditions are studied by the decoupled vibration theory and analytical model of six degree of freedom. Though the mounting conditions are changed to improve the vibration isolation at idle speed, the vibration and the interior noise of the vehicle are reduced significantly at driving speed as well as idle speed. From the indirect endurance test of the front engine mounts, the changed mounting conditions are desirable to endurance as well as vibration reduction of the 4WD vehicle.