• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.78-84
• /
• 1984

CMOS 논리회로에서 부가회로없이 time skew와 무관하게 stuck-open(이하 s-op) 고장을 검출할 수 있는 새로운 알고리즘을 제안한다. 즉, CMOS회로 구성요소로서 Domino CMOS 이 회로를 채택하여 회로의 클럭킹 게이트를 하나의 branch로 간주 모델화하고, transition test를 이용하여 테스트 시이퀸스를 구한다. 또한 이 알고리즘을 VAXII/780상에서 임의의 CMOS회로에 적용시켜 보므로써, 종래의 방법에서 time skew로 인하여 검출될 수 없었던 모든 s-op 고장이 검출됨을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.160-162
• /
• 2001

A determining method of the $\Gamma$ type eqivalent circuit parameters of induction motor driven by inverter source is proposed in this paper. The no-load test by rated frequency (60 Hz) and a blocked rotor test by 25% of rated frequency (l5Hz) are performed with inverter source, and the DC resistance of the stator winding is measured. To determine the more accurate parameters, four simultaneous equations obtained from equivalent circuit of the no-load test and blocked rotor test are solved by using initial values which are evaluated from simplified equivalent circuits. The induction motor performances are computed by using these parameters and compared with measured values of the tested motor. Then it is found that the compared results show good agreement between them.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.836-838
• /
• 2004

Alternating current switch-fuse combinations shall be designed so as to protect for load circuit of distribution line. this switch system shall be test on making and breaking at short-circuit current. the test dutys were performed to prove correct coordination between the switch and fuses in applied test conditions This paper describes characteristics and test method for prove to performance of alternating current switch-fuse combinations.

• 대한통합의학회지
• /
• 제4권4호
• /
• pp.21-32
• /
• 2016

Purpose: The purpose of this study was to identify whether task-related circuit exercise program combined with sensorimotor training for 4 weeks could improve the balance and gait in stroke patients. Method: Fifteen stroke patients who had agreed with the study were randomly divided into 3 groups categorized as task-related circuit exercise program combined with sensorimotor training group (experimental group 1, n=5), task-related circuit exercise program group (experimental group 2, n=5), and control subjects performed conventional physical therapy (control group, n=5). The balance and gait were assessed by BT-4 force platform system, Berg Balance Scale, 10meter Walk Test and Smart Step at before training and after training. Wilcoxon signed rank test was used to analyze change before and after intervention in intra-group. Kruskal Wallis H test, Mann-Whitney U test and Bonfferoni correction were used to analyze changes of all variables in inter-groups. Result: The experimental group 1 showed significant improvements in postural sway area, BBS scores, walking velocity and plantar pressures of affected foot, whereas the experimental group 2 showed significant improvements in BBS scores, and the control group were no significantly different in all variables following training. The changes of postural sway area and BBS scores in the experimental group 1 were significantly greater than them of the control group. The changes of postural sway area in the experimental group 1 was significantly greater than that of the experimental group 2. Conclusion: The result of this study suggest the task-related circuit exercise program combined with sensorimotor training is an effective intervention to improve balance and gait in stoke patients.

• 한국엔터테인먼트산업학회논문지
• /
• 제13권6호
• /
• pp.165-173
• /
• 2019

본 연구는 노인여성의 사망률 개선을 위한 밴드 서킷 트레이닝의 중재 효과를 구명하여 노인들의 삶의 질 향상을 위한 효과적인 운동 중재 프로그램을 제공하는 데 목적이 있다. 본 연구의 목적을 달성하기 위해서 Y시 소재 만 65세 이상 여성을 대상으로 8주간 밴드 서킷 트레이닝 중재가 노인여성의 밴드 서킷 트레이닝 중재가 노인여성의 Senior Fitness Test(SFT)와 Sitting Rising Test(SRT)에 미치는 영향을 구명하여 다음과 같은 결론을 얻었다. 밴드 서킷 트레이닝 중재에 따른 노인여성의 기능적 체력(의자에 앉았다 일어서기, 2kg 덤벨 들기, 2분 제자리 걷기, 의자에 앉아 앞으로 숙이기, 등 뒤로 손잡기, 2.44m 왕복걷기)와 Sitting Rising Test(SRT)는 측정시기와 집단 간 통계적으로 유의한 상호작용효과가 나타났으며, 실험집단에서 밴드 서킷 트레이닝 중재 후 긍정적으로 개선된 것으로 나타났다. 이상의 연구결과를 종합해 볼 때 밴드 서킷 트레이닝 중재는 노인들의 사망률과 관련이 있는 기능적 체력과 SRT에 긍정적 영향을 미치는 것으로 나타나 노인들의 사망률 개선을 통해서 삶의 질 향상을 위한 효과적인 운동 중재 프로그램으로 적용 가능하다고 생각된다.

• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.475-480
• /
• 2014

This study proposes a new synthetic test circuit (STC) for HVDC thyristor valve tests. The conventional STC with a 2-phase chopper requires a 3-phase transformer, a 3-phase diode rectifier, and an IGBT to facilitate the off state of an auxiliary thyristor. In the proposed STC, these three components are replaced with one diode and one resistor, which result in the simplified implementation of the hardware of the STC. Simulation and experimental results demonstrate the validity of the proposed scheme.

• Journal of information and communication convergence engineering
• /
• 제11권1호
• /
• pp.56-61
• /
• 2013

Modern integrated circuits (ICs) are becoming an integrated parts of analog, digital, and radio frequency (RF) circuits. Testing these RF circuits on a chip is an important task, not only for fabrication quality control but also for tuning RF circuit elements to fit multi-standard wireless systems. In this paper, RF test circuits suitable for embedded testing are introduced: RF power detectors, power control circuits, directional couplers, and six-port reflectometers. Various types of embedded RF power detectors are reviewed. The conventional approach and our approach for the RF power control circuits are compared. Also, embedded tunable active directional couplers are presented. Then, six-port reflectometers for embedded RF testing are introduced including a 77-GHz six-port reflectometer circuit in a 130 nm process. This circuit demonstrates successful calibrated reflection coefficient simulation results for 37 well distributed samples in a Smith chart. The details including the theory, calibration, circuit design techniques, and simulations of the 77-GHz six-port reflectometer are presented in this paper.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.485-491
• /
• 2015

This paper shows the design improvement and test model of FAU (Frequency Analysis Unit) in PDD (Partial Discharge Diagnosis system) for 800kV GIS (Gas Insulated Switchgear). We found some problems during operation of previous FAU, such as the aging of fiber-optic converter that can cause communication error, the malfunction of signal analysis circuit etc. And then we solved those problems by design improvement and verified the performance through type test. To monitor partial discharge, the performance of UHF sensor is important but the performance of frequency analysis unit is also very important. So we solved communication error, the malfunction of signal analysis circuit and then increased the operation reliability of FAU by improving fiber-optic converter and signal analysis circuit. Accredited testing laboratory carried out the performance verification test according to performance test criteria and procedure of reliability test standards, IEC-60225, 61000 and 60068 etc. We confirmed the test results which correspond with the performance test criteria.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.141-144
• /
• 2002

Several charge Injection compensation circuits, such as, the dummy transistor circuit, the switched OP-amp circuit, the switched capacitor circuit, were fabricated and the test results were compared. The differences between SPICE simulation results and measurements were within around 10%.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.358-363
• /
• 2010

This paper proposes a step-by-step method of determining the parameters of equivalent circuit which is considered the no load losses for the single phase induction motor which has the starting winding. This method is comprised of three steps, and the stator resistance which is measured by the method of voltage drop is treated as constant and the stator and the rotor leakage reactances are assumed to be the same in every step. The test results of no load and locked rotor test are used in the 1st and 2nd step, and the ratings of name plate of the motor are needed in the 3rd step. In the 1st step, the traditional equivalent circuit parameters are directly calculated by no load and locked rotor conditions. In the next step, five nonlinear simultaneous equations for five unknown parameters can be set up by no load and locked rotor equivalent circuits. These equations are solved by using the initial parameters obtained by the 1st step parameters. In the final step, three nonlinear simultaneous equations for rotor winding resistance, leakage reactance and no load losses component resistance can be set up by equivalent circuit under the rated operation. Three parameters are solved by using the 2nd step parameters. Thus, equivalent circuit parameters are gradually refined step by step. The validity of the proposed method is evaluated by comparing the computed values obtained by the equivalent circuit parameters with the experimental values of the load test.