• Journal of Korean Physical Therapy Science
• /
• v.10 no.1
• /
• pp.18-29
• /
• 2003

The purpose of this study by examine the effect of visual neglect on hemiplegia motor recovery are showing trouble which can be raised by visual neglect and helping the patient's ADL and functional recovering. Among the patients who are being taken physical therapy in many other hospitals in Busan From February 1st 2002 to august 31st, we chose 20 patients as control group who did not have symptoms of visual neglect and 20 other patients who did have as case group. We used Albert's test and line bisection as visual neglect test, and MAS as motor recovery. The average age of the patient group is 51.55 and that of control is 44.9. The men's rate is higher than women' s in both groups. Although the rate of left hemiplegia is higher than right hemiplegia in case group, that of right hemiplegia is higher than left hemiplegia in control group. There is much lesion site of basal ganglia in case group. There is the most amount of transformation of MAS when visual neglect is shorter than 1.5centimeter. Each change of MAS point before and after therapy in case group and control group is revealed $6.5{\pm}4.37$ and $12.5{\pm}5.95$.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.72-77
• /
• 2010

A hydraulic test on a filament wound case of Kick-Motor was conducted to evaluate the structural stiffness degradation and to confirm the burst performance. Failure criteria have been defined with bursting above 150% of MEOP(Maximum Expected Operation Pressure) and failure in the cylinder. The analysis result showed that filament fiber in the cylinder should be broken at about 2088psig. From a hydraulic test it has been verified that composite case meets the failure requirements, and that the stiffness does not decrease even after a year since the manufacturing.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.89-96
• /
• 2012

The rubber side could be contaminated using the existing pulse echo method because the ultrasonic wave was incident on the rubber side from the interior of the steel motor case, which could lead to the critical disbond defect. To develop the test method which can be replaced the existing method, the ultrasonic wave was incident on steel face of the steel/rubber adhesive test block. Rubber resonance frequencies measured from the steel/rubber adhesive test block were in good agreement with theoretically predicted rubber resonance frequencies. This paper was described about the ultrasonic resonance method to convert the rubber resonance frequency into the rubber thickness.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.138-142
• /
• 2015

Most of the existing studies on functional safety testing for the railway signaling system software have focused on verifying the functional safety through the monitoring of internal memory embedded railway signaling system. However, the railway signaling system is one of the typical embedded control system in the railway sector, and the embedded software has a characteristic of generating an appropriate outputs through the combination of internal processing in consideration of the current internal status and external input. Therefore, the test approach of using the interface communication channel can be effective way for the functional testing for railway signaling system software in consideration of these characteristic. Since a communication interface specification of the railway signal system has a the properties of the sequence input and output signals, test-case for software testing is the most effective methodology by MSC (Message Sequence Chart) language, one of the graphic language. The MSC-based test-case generating methodology for signaling system software was proposed in this paper.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.3
• /
• pp.123-133
• /
• 2018

The purpose of this paper is to propose an experimental method to evaluate the resistance of abrasion about 24 MPa, 27 MPa, and 30 MPa compressive strength. These strength are used in the design and construction of concrete hydraulic structures in Korea. The mixing ratios of the ready mixed concrete strengths were investigated countrywide and set the representative mixture proportion ratios of the nine mixed types of OPC, FA and BFS. After making and curing the test specimens, the underwater abrasion test was performed. ASTM C 1138 International Standard was used to fabricate the test equipment, and the surface abrasion resistance of the specimen was tested using the test equipment. In the case of OPC, the 30% abrasion resistance improvement effect was observed at 72 hours as the water-binder ratio decreased. That was reason the coated cement bond strength of the specimen was strong. In the case of BFS and FA, it was improved by 9.9% and 3.8%, respectively, at 72 hours as the water-binder ratio decreased. It was due to the characteristics of the latent hydraulic and pozzolanic reactions. Generally, the relative abrasion resistance of concrete can be evaluated at 24 hours. However, in case of low strength (under 24 MPa), the surface mortar layer wears much faster at the first 12 hours, so it can be considered to evaluate the relative abrasion loss rate at this point.

• The Journal of Pediatrics of Korean Medicine
• /
• v.30 no.2
• /
• pp.23-30
• /
• 2016

Objectives The purpose of this study is to investigate recent clinical studies on effect of acupuncture for strabismus in Korea and other countries. We have analyzed 10 years (from 2006 to 2015) of case studies and randomized controlled trials (RCT) on effect of acupuncture for strabismus. Methods The search database includes Oasis, KTKP (Korean Traditional Knowledge Portal), Medline, Embase, and Cochrane library. To narrow the search, the following key search terms were used: 'strabismus, acupuncture'. The search was limited to the publication date from 2006 to 2015. 7 case studies and 5 control studies were selected for analysis. Results and Conclusions 1. The acupuncture treatment is effective for paralytic strabismus 2. The studies used BL1, GB1, ST2, TE23, GB15, EX-HN5, ST1, and LI4 acupoints and also an electroacupuncture treatment, which is 15 minutes of extraocular muscle stimulation, was used. 3. Degree of strasbismus was tested by Ocular motor range test, Corneal light reflex test, Ocular abducent scale test (Scott and Kraft, Diploptic range test).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.562-569
• /
• 2012

The rubber side could be contaminated using the existing pulse echo method because the ultrasonic wave was incident on the rubber side from the interior of the steel motor case, which could lead to the critical disbond defect. To develop the test method which can be replaced the existing method, the ultrasonic wave was incident on steel face of the steel/rubber adhesive test block. Rubber resonance frequencies measured from the steel/rubber adhesive test block were in good agreement with theoretically predicted rubber resonance frequencies. This paper was described about the ultrasonic resonance method to convert the rubber resonance frequency into the rubber thickness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.41-42
• /
• 2023

Test results for a total of four types of complex waterproofing methods were analyzed. In the case of the A method, the stress generated by high-viscosity compounds adhering to the base test body during the behavior of the test body was transferred to the sheet surface layer. In the case of the B method and the C method, the properties of the waterproof sheet consisting of a non-hardened seal based and a non-hardened seal are well reflected and stress absorption in the non-hardened seal layer acts strongly, rapidly reducing stress transfer to the surface of the waterproof sheet. In the case of the D method, slip occurs due to repeated behavior, and the stress on the attachment surface is reduced, and the stress transfer to the surface is greatly reduced. As a result, four types of composite waterproofing methods resulted in changing the stress transfer mechanism caused by behavior on the concrete surface due to the physical properties of the internal constituent material of the waterproof sheet.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.773-774
• /
• 2008

As an Embedded system get more complicated, the importance of the software test increases. Especially it is mandatory to test the embeded software for a charge degrade of the development company which is happened due to the error, a danger element clearance to the customer, a performance enhance of the system. In this paper, we propose efficient test method which discovers the bug an embedded system using suitable test case selection and automation test.

• Journal of the Korean Statistical Society
• /
• v.36 no.1
• /
• pp.149-156
• /
• 2007

This study suggests a new method for testing seasonal unit roots in a momentum threshold autoregressive (MTAR) process. This sign test is robust against heteroscedastic or heavy tailed errors and is invariant to monotone data transformation. The proposed test is a seasonal extension of the sign test of Park and Shin (2006). In the case of partial seasonal unit root in an MTAR model, a Monte-Carlo study shows that the proposed test has better power than the seasonal sign test developed for AR model.