• Journal of Sensor Science and Technology
• /
• v.33 no.3
• /
• pp.152-157
• /
• 2024

In this study, we propose a novel 8T ternary SRAM that can process three logic values (0, 1, and 2) with only two additional transistors, compared with the conventional 6T binary SRAM. The circuit structure consists of positive and negative ternary inverters (PTI and NTI, respectively) with carbon-nanotube field-effect transistors, replacing conventional cross-coupled inverters. In logic '0' or '2,' the proposed SRAM cell operates the same way as conventional binary SRAM. For logic '1,' it works differently as storage nodes on each side retain voltages of V_DD/2 and V_DD, respectively, using the subthreshold current of two additional transistors. By applying the ternary system, the data capacity increases exponentially as the number of cells increases compared with the 6T binary SRAM, and the proposed design has an 18.87% data density improvement. In addition, the Synopsys HSPICE simulation validates the reduction in static power consumption by 71.4% in the array system. In addition, the static noise margins are above 222 mV, ensuring the stability of the cell operation when V_DD is set to 0.9 V.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.3 no.1
• /
• pp.18-30
• /
• 1985

This paper describes a logical design of ternary arithmetic circuits based on T-gates. A new circuit of T-gate is proposed which is improved in the stability of operation, and a ternary adder, subtracter, multiplier and divider using the T-gates are realized. The realization of the circuits is based on the Mod-3, system and the Signed Ternary system using digit 0, 1, 2 and -1, 0, +1 as arithmetic states.

• Journal of Applied and Pure Mathematics
• /
• v.6 no.1_2
• /
• pp.97-103
• /
• 2024

This study is about digits of numbers in system logic B₃. Any real number is written as digits in the binary system, in the ternary system. The numbers in base two and base three are also written in the B₃ system ternary logic. These two writing methods are transferred into the third method. The real numbers 0,1 and 0, 1, 2 are written as digits. The same real numbers are written as digits of elements of the set -1, 0, 1 in base B₃. The periods here are investigated. The relationship between these digits is analysed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.191-194
• /
• 2009

PtRu based and PtSn based ternary catalysts were prepared by a conventional impregnation method using NaBH4 as reducing agent. The alloy formation, crystalline size and chemical composition of the in-house catalysts were determined by XRD, TEM and EDX, respectively. The chemical compositions of in-house catalysts were quite similar to the nominal value and good alloy formations were also observed. Further, crystalline sizes of ternary catalysts were comparatively smaller than binary catalysts and were approximately 3.5 ~ 5.5 nm. The electrochemical measurements were carried out in the solution 1 M $H_2SO_4$ with 1 M $C_2H_5OH$ at room temperature. LSV results obtained that ternary catalysts were higher current densities and specific activities. Especially, in case of tungsten addition system, Pt5Sn4W/C have the highest specific activities values and was approximately 21.2 and 3.1 times higher than that of PtRu/C and PtSn/C electrocatalyst.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.226-232
• /
• 2001

The properties of poly(ethylene terephthalate) (PET)/maleic anhydride-grafted polypropylene (MAgPP)/poly(styrene-co-maleic anhydride)(PScMA) ternary blend were investigated. The ternary blend was immiscible based on the glass transition temperatures measured by dynamic mechanical analyzer (DMA). The degradation of MAgPP during melt mixing for 30 min at 280$^{\circ}C$ did not affect the properties of the ternary blend. The interaction among the components was confirmed from the rheological properties, which was increased with the PSCMA contents. In terms of the mechanical properties, it was observed to satisfy the mixture rule for a multiple system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1647-1650
• /
• 2002

In this paper, a class of multi-level spreading codes, i.e., ternary ZCD(zero-correlation duration) spreading codes are introduced. Novel ternary ZCD code sets are generated by carrying out a chip-shift operation of the ternary preferred pairs (TPP) with a ZCD of(0.75N+1)chips. Ternary ZCD codes have superior family size than the binary ZCD codes and they are effective for approximately synchronized (AS) CDMA

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.41-49
• /
• 2020

To improve the problem of strength reduction of unary and binary blended non-cement concrete that occur at room temperature, comparative analysis was conducted based on the slump and compressive strength properties of ternary blended non-cement concrete in which cement was replaced with silica fume, fly ash, and blast furnace slag, and the following conclusions were drawn. The ternary blended non-cement concrete showed higher compressive strength than binary binder concrete, and the slump reduction was less when 10% silica fume was mixed. In addition, the appropriate composition ratio range of each by-product was suggested according to slump and compressive strength level based on ternary diagram.

• Journal of Internet Computing and Services
• /
• v.12 no.1
• /
• pp.27-38
• /
• 2011

In this paper, we propose a multiple access scheme using MHP(Modified Hermite Polynomial) pulse and ternary code for high-data and low-data rate for Out-body WBAN(Wireless Body Area Network). To satisfy the requirement of WBAN system, UWB-IR has been considered as a promising candidate for Out-body WBAN. The proposed multiple access scheme, using orthogonal MHP pulse and ternary code sets, reduces multi-user interference and distinguishes user signal from multi-user signals. We propose two algorithms for synchronous and asynchronous WBAN system. The symbol is constructed by MHP pulses and time hopping duration to reduce multi-user interference in the synchronous WBAN system. The symbol also is constructed by ternary code to avoid collision between pulse trains in the asynchronous WBAN system. The results of the proposed multiple access scheme show a clear improvement of BER.

• Korean Journal of Materials Research
• /
• v.31 no.5
• /
• pp.296-300
• /
• 2021

Al-Cr-Si ternary quench ribbons are fabricated using a single roll method and investigated for their structural and thermal properties. In particular, the sinterability is examined by pulse current sintering to obtain the following results. The Al₇₄Cr₂₀Si₆ composition becomes a quasicrystalline single phase; by reducing the amount of Cr, it becomes a two-phase mixed structure of Al phase and quasicrystalline phase. As a result of sintering of Al₇₄Cr₂₀Si₆, Al₇₇Cr₁₃Si₁₀ and Al₉₀Cr₆Si₄ compositions, the sintering density is increased with the large amount of Al phase; the sintering density is the highest in Al₉₀Cr₆Si₄ composition. In addition, as a result of investigating the effects of sintering temperature and pressurization on the sintered density of Al₉₀Cr₆Si₄, a sintered compact of 99% or more at 513 K and 500 MPa is produced. In particular, since the Al-Cr-Si ternary crystal is more thermally stable than the Al-Cr binary quaternary crystal, it is possible to increase the sintering temperature by about 100 K. Therefore, using an alloy of Al₉₀Cr₆Si₄ composition, a sintered compact having a sintered density of 99 % or more at 613 K and 250 MPa can be manufactured. It is possible to increase the sintering temperature by using the alloy system as a ternary system. As a result, it is possible to produce a sintered body with higher density than that possible using the binary system, and at half the pressure compared with the conventional Al-Cr binary system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.331-332
• /
• 2009

The purpose of this study was to evaluate the effect of rejct fly-ash and blast-furnace slag on hydration heat and strength development of ternary system cement and concrete. Main experimental variables were performed fly-ash contenes (20%) and rejct fly-ash contents (20%) and slag contents (50%, 55%). The hydration heat and insulation temperature, strength development were measured to analyze the concrete of ternary system cement