• 제목/요약/키워드: ternary concrete

검색결과 138건 처리시간 0.03초

저발열형 Premixed Cement를 사용한 콘크리트의 기초물성 평가 및 수화열 해석에 관한 연구 (Fundamental Evaluation and Hydration Heat Analysis of Low Heat Concrete with Premixed Cement)

  • 윤지현;전중규;전찬기;김기형
    • 한국건설순환자원학회논문집
    • /
    • 제2권1호
    • /
    • pp.10-18
    • /
    • 2014
  • 본 연구에서는 시멘트와 광물질혼화재인 고로슬래그미분말과 플라이애쉬를 미리 혼입한 Premixed Cement를 사용한 콘크리트와 수축저감제가 혼입된 3성분계 콘크리트, OPC 100%의 콘크리트에 대하여 기초물성 평가로 공기량, 슬럼프, 압축강도 및 건조수축 시험을 수행하고, 수화열 해석을 수행하여 Premixed Cement를 사용한 콘크리트의 현장 적용성을 검토하였다. 검토결과 Premixed Cement를 사용한 콘크리트는 목표 작업성 및 설계기준압축강도를 충분히 만족하며, 건조수축 측면에서도 수축 저감제를 혼입한 3성분계 콘크리트와 유사한 건조수축 특성을 나타내었다. 또한, 수화열 해석 결과 Premixed Cement를 사용한 콘크리트는 목표 온도균열지수를 충분히 확보할 뿐만 아니라, 수축 저감제를 혼입한 3성분계 콘크리트보다 경제성을 확보할 수 있는 방안으로 도출되었다. 향후 매스콘크리트구조물 시공에 있어 구조물의 내구성능 및 유지관리 편의성 향상을 위해 Premixed Cement를 사용한 콘크리트의 현장적용은 바람직한 것으로 판단된다.

리젝트애시를 사전혼합골재로 활용시 AE제에 의한 공기량 확보방안 (Method to Maintain Air Contents of Mortar using Premixed Aggregate with Reject ash by using AE Agent)

  • 현승용;문병룡;이제현;장덕배;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 추계 학술논문 발표대회
    • /
    • pp.103-104
    • /
    • 2017
  • This paper is to provide a method to prevent air loss of the concrete using reject ash based ternary blended aggregate due to absorption of AE agents by reject ash by adding AE agents into reject ash before mixing concrete. Test results indicate that air loss due to presence of reject ash in ternary blended aggregate can be recovered by over use of AE agents into aggregate directly before mixing.

  • PDF

해양환경을 고려한 다성분계 시멘트 콘크리트의 황산염 및 동결융해 저항 특성 (Sulfate and Freeze-thaw Resistance Characteristic of Multi-component Cement Concrete Considering Marine Environment)

  • 김명식;백동일;강준호
    • 한국해양공학회지
    • /
    • 제26권3호
    • /
    • pp.26-32
    • /
    • 2012
  • Recently, concrete using multicomponent blended cement has been required to increase the freeze-thaw and sulfate resistances of concrete structures exposed to a marine environment. Thus, the purpose of this study was to propose the use of concrete containing multicomponent blended cement as one of the alternatives for concrete structures exposed to a marine environment. For this purpose, batches of concrete containing ordinary portland cement (OPC), binary blended cement (OPC-G, G: ground granulated blast slag), ternary blended cement (OPC-GF, F: fly ash), and quaternary blended cement (OPC-GFM, M: mata-kaolin) were made using a water-binder ratio of 50%. Then, the durability levels, including thesulfate and freeze-thaw resistances, were estimated for concrete samples containing OPC, OPC-G, OPC-GF, and OPC-GFM. It was observed from the tests that the durability levels of the concrete samples containing OPC-G and OPC-GF were found to be much better than that of the concrete containing OPC. The optimum mixing proportions were a40% replacement ratio of ground granulated blast slag for the binary blended cement and a30% replacement ratio of ground granulated blast slag and 10% fly ash for the ternary blended cement.

3성분계 무기결합재의 80℃ 수중양생 시간변화에 따른 강도특성 (Strength Characteristic according to the 80℃ Water Curing Time Variation of the Ternary System Inorganic Binder)

  • 이진우;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.100-101
    • /
    • 2014
  • The global warming because of the CO2 emission and solution about this emerge as the international enviroment problem. Particularly, it is the absolutely it is needed for reducing the CO2 in the cement industry and harmful material actual condition. And the construction of home and abroad and material manufacturers tries for the technology development for the carbon dioxide and harmful material reduction which the portland cement in manufacture is usually emitted along with the increase of concerns about the environment-friendly concrete and panel. Therefore, in this research, the compressive strength of the inorganic binder and flexural strength tries to be measured in order to draw the inappropriate high temperature cure time of the ternary system inorganic binder using the blast furnace slag, red mud, silica fumewhich is the industrial byproduct with the cement substitute material, and etc.

  • PDF

알칼리 활성화 3성분계 혼합시멘트의 염해 저항성에 관한 실험적 연구 (An Experimental Study on the Chloride Attack Resistibility of Alkali-Activated Ternary Blended Cement Concrete)

  • 양완희;황지순;전찬수;이세현
    • 한국건축시공학회지
    • /
    • 제16권4호
    • /
    • pp.321-329
    • /
    • 2016
  • 포틀랜드 시멘트, 고로슬래그 미분말, 플라이애시를 활용한 3성분계 혼합시멘트는 해양 콘크리트 구조물의 염해내구성 확보 등의 이유로 사용이 증가하고 있다. 이에 따라 본 연구에서는 보통포틀랜드 시멘트, 고로슬래그 미분말, 플라이애시를 4:4:2로 혼합한 3성분계 시멘트에 알칼리 설페이트계 활성화제(Modified Alkali Sulfate type)를 1.5~2.0% 사용할 때, NT Build 492에 의한 염화물 확산 시험과 ASTM C 1202( KS F 2271)에 의한 염소이온 침투 저항성 시험을 이용하여 콘크리트의 염해저항성의 변화를 관찰하고자 하였다. 그 결과 알칼리 설페이트계 활성화제의 활용에 따라 Plain 대비 슬럼프는 다소 감소하는 경향을 나타냈으나 재령 2일부터 재령 7일까지의 압축강도는 17~42% 향상되었다. 또한 재령 28일에 측정한 염화물 확산 계수는 알칼리 설페이트의 활용에 따라 Plain 대비 36~56% 감소하였으며, 염소이온 침투 저항성 시험에 따른 총통과전하량은 재령 7일은 33~62%, 재령 28일은 31~48% 감소하는 결과를 나타내었다. 이는 기존의 연구결과와 마찬가지로 알칼리 활성화에 의해 고로슬래그 미분말 및 플라이애시의 반응성이 향상되어 공극이 더욱 치밀해진 효과에 의한 것으로 판단된다. 향후 이와 관련하여 장기재령의 시험체를 대상으로 한 실험과 분석이 지속적으로 이루어져야 할 것으로 판단된다.

고로슬래그와 플라이애시 대체율이 80MPa 3성분계 고강도콘크리트의 재료물성에 미치는 영향 (The Effect of Mixing Ratio of Blast Furnace Slag and Fly Ash on Material Properties of 80MPa High Strength Concrete with Ternary Cement)

  • 이범식;전명훈;이도헌
    • 토지주택연구
    • /
    • 제3권3호
    • /
    • pp.287-297
    • /
    • 2012
  • 보통포틀랜드시멘트(OPC)와 고로슬래그 및 플라이애시 만으로 설계기준압축강도 80MPa의 3성분계 고강도콘크리트(이하 고강도콘크리트)를 개발하기 위하여, 고로슬래그와 플라이애시의 대체율이 고강도콘크리트의 경화전 후 재료물성 변화에 미치는 영향을 평가하였다. 고강도콘크리트의 경화전후 재료물성 평가결과, 고로슬래그와 플라이애시 대체율이 최대 30%까지 증가할수록 유동성과 장기강도가 우수한 것으로 나타났다. 또한 OPC만으로 제작된 시험체와 비교하여 길이변화 특성이 우수하며, 혼화재 사용에 따른 탄산화는 없는 것으로 나타났다. 고강도콘크리트 재료물성 평가결과, 고로슬래그 대체율 25%, 플라이애시 대체율 15%일 경우, 경화전 후 재료물성이 가장 우수한 것으로 나타났다. 이 연구결과는 향후 고가의 실리카퓸을 대체할 수 있는 고강도콘크리트의 개발에 유용하게 활용될 수 있을 것으로 기대된다.

Physical Properties of 50MPa and 80MPa Ternary High Strength Concretes before and after Concrete Pumping

  • Lee, Bum-Sik;Kim, Seong-Deok;Jun, Myoung-Hoon;Park, Sung-Sik;Park, Su-Hee;Jung, Sang-Jin
    • 한국건축시공학회지
    • /
    • 제12권4호
    • /
    • pp.451-459
    • /
    • 2012
  • At the Korea Land and Housing Corporation(LH), concretes with high design strength of 50 MPa and 80 MPa that are composed only of ordinary Portland cement, blast furnace slag, and fly ash are developed. To determine whether the developed high strength concretes have the same properties when they are produced in batch plant(B/P) condition in the ready mixed concrete plant, and as existing high strength concretes, field tests are performed and material properties are evaluated. To investigate the material properties of the high strength concretes before and after pumping, compressive strength, flowability, air content, hydration temperature, pumping and compactability are evaluated. In field tests, before and after pumping, flowability satisfied the relevant criteria. In terms of air content, while it was slightly decreased after pumping, it satisfied the requirements. Hydration temperature criteria were satisfied, and compactability was excellent as well. The study found that the developed ternary high strength concretes have the same properties as existing high strength concretes. They can also be useful for the construction of high-rise buildings, as they are economical.

ASR Resistance of Ternary Cementitious Systems Containing Silica Fume-Fly Ash Using Modified ASTM C 1260 Method

  • Shon, Chang-Seon;Kim, Young-Su;Jeong, Jae-Dong
    • 콘크리트학회논문집
    • /
    • 제15권3호
    • /
    • pp.497-503
    • /
    • 2003
  • Supplementary cementitious materials (SCM) such as fly ash, ground granulated blast furnace slag and silica fume are now being extensively used in concrete to control expansion due to alkali-silica reactivity (ASR). However, the replacement level of a single SCM needed to deleterious ASR expansion and cracking may create other problem and concerns. For example, incorporating silica fume at levels greater than 10% by mass of cement may lead to dispersion and workability concerns, while fly ash can lead to poor strength development at early age, The combination of silica fume and fly ash in ternary cementitious system may alleviate this and other concerns, and result in a number of synergistic effects. The aim of the study was to enable evaluation of more realistic suitability of a silica fume-fly ash combination system for ASR resistance based on an in-house modification of ASTM C 1260 test method. The modification can be more closely identified with actual field conditions. In this study three different strengths of NaOH test solution(1N, 0.5N, and 0.25N) were used to measure the expansion characteristics of mortar bar made with a reactive aggregate. The other variable included longer testing period of 28 days instead of a conventional 14 days.

벨라이트계 혼합 결합재의 수화열 특성에 관한 연구 (Study on Hydration Heat of Blended Belite Binder)

  • 이근주;조재우;정상화;김장호
    • 콘크리트학회논문집
    • /
    • 제23권2호
    • /
    • pp.145-150
    • /
    • 2011
  • 전국적으로 토목 및 건축 구조물의 대단위 공사 및 정비 사업이 발족 및 추진되어 부재 크기가 큰 매스 콘크리트 구조물이 많이 건설되고 있다. 대규모 콘크리트 구조물의 콘크리트 매트릭스 내 높은 수화열 발생은 콘크리트의 품질 및 시공 기간을 좌우하는 가장 중요한 요인이 되고 있다. 이로 인해 발생되는 내부 균열이 콘크리트의 내구성, 수밀성 및 강도를 저하 시키게 된다. 벨라이트계 저열 포틀랜드 시멘트와 산업부산물을 이용한 수화열을 저감시키는 방법으로 이 연구에서는 고로 슬래그 또는 플라이애쉬를 7단계로 치환한 2성 분계 결합재와 4단계로 치환한 3성 분계 결합재를 사용하였고, 혼화재의 치환율 변화가 재령에 따른 수화 발열량, 강도 및 SEM, XRD 등의 기초 물성에 미치는 영향을 비교 분석하였다. 플라이애쉬가 치환된 2성 분계 결합재의 28일 누적 수화열은 플라이애쉬 함유량의 증가함에 따른 높은 수화열 저감 효과를 보여주며, 고로 슬래그가 치환된 2성 분계 결합재의 28일 누적 수화열은 고로 슬래그 치환율이 증가함에 따라 감소하지만 수화열 감소 효과는 높은 치환율 대비 낮은 결과를 나타내었다. 3성 분계 결합재의 28일 누적 수화열의 경우 플라이애쉬 치환율이 높아짐에 따라 낮은 수화열 결과를 보여주며 특히 40% 플라이애쉬 및 30% 고로 슬래그 결합재는 벨라이트계 저열 포틀랜드 시멘트 대비 50%의 저열 효과를 보여주었다. 연구 결과를 통해 수화열 발생이 낮고 시공 가능한 압축강도를 가진 벨라이트계 혼합 결합재를 사용하여 콘크리트 내 온도 상승이 감소된 것을 보여주었다.

과밀 배근된 교량 부재용 초유동 자기충전 콘크리트의 역학적 특성 (Mechanical Properties of the High Flowing Self-Compacting Concrete for Members of Bridge Overcrowded Arrangement of Bar)

  • 최연왕;김용직;강현진
    • 콘크리트학회논문집
    • /
    • 제20권2호
    • /
    • pp.175-183
    • /
    • 2008
  • 초유동 자기충전 콘크리트 (high flowing self-compacting concrete)는 현재 국내의 경우 건축 구조물에 한정적으로 적용되고 있으며, 토목 구조물의 적용은 찾아보기 어려운 실정이다. 그러나 북미 및 유럽의 경우 유동성 및 재료 분리 저항성이 우수한 초유동 자기충전 콘크리트를 프리캐스트 및 프리스트레스트를 도입한 과밀 배근된 교량 부재에 사용하고 있어 초유동 자기충전 콘크리트를 교량 및 토목구조물 등에 광범위 하게 확대 적용하여 그 활용성을 높여야 할 것으로 판단된다. 따라서 본 연구에서는 토목 구조물인 과밀 배근된 교량 구조물에 초유동 자기충전 콘크리트를 적용하기 위한 방법의 일환으로 고로슬래그 및 플라이애쉬를 2성분계 및 3성분계로 배합하였으며, 과밀 배근된 구조물에 적용할 수 있는 일본토목학회의 JSCE 1등급 규정에 따른 초유동 자기충전 콘크리트의 역학적 특성을 평가하였다. 시험결과 2성분계의 배합보다 3성분계의 배합이 우수한 역학적 성질을 나타내었으며, 과밀 배근된 프리캐스트 교량 부재에 사용 가능할 것으로 판단된다.