• 한국식품영양과학회지
• /
• 제34권2호
• /
• pp.298-305
• /
• 2005

과채류 포장용 기능성 항균포장지는 항균력이 우수한 식물성 항균소재(botanical antimicrobial agent-grapefruit seed extract mixture: BAAG)의 CaCO$_3$분말제재와 가스흡착제 기능을 소유한 제올라이트를 일정배합비율로 펄프지료에 첨가하여 TAPPI Standard Method T200 sp-96에 의거하여 제조하였다. 아울러, 보류향상제인 cationlc polyacrylamide (Ca-PAM)와 발수처리제 alkyl ketone dimer(AKD)도 같이 첨가하였다. 이때, 사용된 BAAG분말의 평균입자크기는 12.45였으며, Scanning Electron Microscope 촬영사진에서 CaCO$_3$에 침착되어 있는 BAAG 및 제올라이트가 육면체 형태의 미세한 분말로 지료상에 구성되어 있음을 알 수 있었으며, 포장원지내에 보류된 항균제의 보유량을 회분함량으로 측정한 결과, 항균제의 첨가량을 증가시킬수록 회분함량이 증가하는 것으로 미루어 Ca-PAM이 지료 섬유 네트워크내에 항균제를 정착시키는데 매우 효과적인 보류향상제로 작용함을 알 수 있었다. 한편, 분말형 항균제와 제올라이트를 지료에 첨가하여 포장원지를 제조하였을 때, 포장원지의 인장강도(tensile strength)와 파열강도(burst strength)는 항균제와 제올라이트를 첨가하지 않았을 때보다 다소 감소하는 경향을 나타내었고, 반면에 강성(stiffness)과 인열강도(tear strength)는 증가하는 경향을 나타내었다. 그러나, 기능성 첨가제 분말의 첨가로 인하여 발생할 수 있는 골판지 상자의 라이너나 단위 포장용(itempackaging)포장지의 강도적 성질의 감소현상이 미미할 것으로 판단되어 항균포장지 제조에 사용되는 항균제와 제올라이트분말은 종이의 물성 열화에 미치는 영향이 크지 않는 것으로 나타났다.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.26-33
• /
• 2014

Frankincense resin was applied to Hanji to improve its physical properties. The resin-treated paper showed the increasement of physical properties such as weight, thickness, and density. The highest increasement in weight and density of resin-treated paper were found at 30% treatment concentrations and the largest values of density were $41g/m^2$ Hanji. With the increasement of concentration, the brightness was decreased and transparency was improved. Of the mechanical properties of the paper, the tensile index and burst index showed the improved values. The tear index, however, was decreased. The frankincense resin showed the highest result in the tensile index of resin-treated paper and the basis weight of $41g/m^2$ Hanji. The air resistance of the resin-treated paper got improved with the increase of the concentration and $105g/m^2$ Hanji showed the highest values. The highest improvement in air resistance may make the resin-treated Hanji possible to use for semipermeable materials.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.81-87
• /
• 2005

Blends of silicone rubber (VMQ) and liquid crystalline polymer (LCP) were prepared by the melt mixing technique. Mechanical, XRD, thermal and dynamic mechanical investigations are reported for the pure silicone rubber and blends. The mechanical properties, viz. the tensile strength, tear strength and elongation at break, of the silicone rubber decreased with the addition of LCP. The SEM study on the tensile fractured surface of the blends revealed that they had a two phase structure, and that the failure was mainly due to fiber pull out, which suggests that the VMQ and LCP are incompatible in all of the proportions examined in this study. However, the FTIR study shows that there was a partial interaction between the VMQ and LCP, but which may not be sufficient to grip the fibrils under the applied load. In the XRD analysis, it was observed that the crystalline structure of the silicone rubber deteriorated in the presence of LCP. The DMA study suggested that the storage modulus of the silicone rubber was improved with the addition of LCP, due to the high modulus of the LCP phase. The thermal stability of the silicone rubber was greatly reduced by the addition of LCP, due to the latter having a thermal stability lower than that of silicone rubber.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.122-127
• /
• 2003

환경에 유해한 PVC 재질의 바닥재나 시트를 대체하기 위하여 styrene-ethylene-butadiene-styrene(SEBS)과 같은 열가소성고무를 사용하고 polypropylene(PP) 등의 폴리머와 오일, 무기물 및 안정제 등을 혼합하여 내충격성 또는 탄성이 우수한 새로운 소재를 개발하기 위한 컴파운딩 연구를 진행하였다. SEBS와 오일의 혼합물에서 경도는 오일의 함량이 증가함에 따라서 선형적으로 감소하였고, SEBS/oil/PP의 조성물에서는 PP의 함량이 증가하면 인장강도는 선형적으로 증가하는 반면, 신율은 PP가 50phr상에서는 거의 영향이 없었다. PVC 소재의 바닥재나 시트를 대체 사용하기 위한 실질적인 SEBS 혼합물의 조성물에서도 인장 및 인열강도, 그리고 경도는 PP 함량에 비례하여 증가하는 것으로 나타났으나, 용융지수는 PP 함량이 증가하면 감소하는 것으로 나타났다.

• Clinics in Shoulder and Elbow
• /
• 제11권2호
• /
• pp.71-76
• /
• 2008

회전근 개 파열의 병리 생태와 증상이 없는 파열이 증상이 있는 파열로의 진행 과정은 아직 불분명하여 많은 논란이 있다. 이는 유전적 소인, 회전근 개를 싸고 있는 조직의 외인성 충돌, 건 자체 내의 내인성 퇴행성 변성과 같은 여러 요소들이 관여한다. 연령의 증가에 따른 회전근 개의 퇴행성 변화는 회전근 개의 해부학 및 역학적 환경과 관련이 깊다. 또한 파열된 회전근 개 표본의 조직 병리 소견으로 골에 부착되는 건의 기시부에서는 퇴행성 변성이 나타나며 이러한 현상은 건의 신장력을 약화시키게 된다. 건의 퇴행성 변성의 진행이 내인성이냐 외인성이냐의 의문에 대해 저자는 내인성에 의해 퇴행성 변성이 진행된다고 생각하며 비록 회전근 개 파열이 여러 요소에 의해 이차적으로 발생되기는 하나, 회전근 개 파열의 일차적 원인은 존재하는 퇴행성 변화일 것으로 사료된다.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.107-116
• /
• 2018

Simplification of the manufacturing process in shoe making is essential to improve productivity and reduce production costs. To improve the adhesion of EVA foam used as a midsole, EVA/itaconated EPDM(EPDM-g-IA)(80/20wt%) blend was prepared using Torque Rheometer-Plasti-Corder, and 1,6-hexamethylenediamine/crosslinking agent/foaming agent/additive were mixed, followed by amidation reaction and foaming to prepare EVA/EPDM-g-IA foam for shoe midsole. In this study, we investigate the effect of the content of 1,6-hexamethylenediamine(0, 0.5, 1.0, 2.0, 3.0) on the mechanical properties, water-contact angle and adhesion of EVA/itaconated EPDM foam. As the content of 1,6-hexamethylenediamine increased, mechanical properties such as tensile strength, tear strength, tensile elastic modulus, hardness, and water-contact angle were lowered, but elongation at break and compression set(%) were increased. Both normal type and non-UV type adhesive strength increased with increasing diamine content. In particular, it was found that the adhesion strength of the non-UV type adhesion increased sharply with increasing diamine content. As a result, an adherend rupture occurs in a foam sample having a content of 1,6-hexamethylenediamine of 3phr. From this, it can be seen that the EVA/itaconated EPDM foam for shoe midsoles, which can be used for non-UV adhesion without primer and UV treatments, have been developed.

• 한국의류학회지
• /
• 제32권9호
• /
• pp.1366-1375
• /
• 2008

This studies were carried out in order to develope environmentally-friendly fiber materials and substitute resources of Paper mulberry. Various plant fibers such as New Zealand flax, Indian mallow, Kuzu vine and Yucca were used as raw materials of hand-made papers. We rotted these 4 kinds of plant fibers and removed non-cellulose. After rotting, the pulping rate(%) and the length of fibers in pulps were measured. The physical characteristics of papers made of various plants fiber were investigated and the probabilities of practical use were considered. The results were as follow: The non-cellulose contents of plant fibers were $30{\sim}40%$ and those contents must be lower down to 8% to be able to manufacture the hand made papers. The lignin in pulps were removed almost and the hemicellulose were partially removed to reach up to appropriate level of the pulp rates and fiber lengths. The more hemicellulose removed, the finer fiber thickness were and rapidly the lower Hanji tensile strength were. But the tear strength of these plants of hand-made papers do not decreased so much as tensile strength. So the property of 4 types of plant fibers might be of great advantages to make hand-made papers. Both tensile and tear strengths of Hanji of New Zealand flax, Indian mallow, Kuzu vine and Yucca were higher than Paper mulberry hand-made paper. When 30% of mulberry paper were mixed, the mixing effect showed maximum. Because of the functions of all plant fiber hand-made papers showed better than those of Paper mulberry hand-made paper, 4 types of plant fibers could be substitute Paper mulberry.

• Elastomers and Composites
• /
• 제7권1호
• /
• pp.45-52
• /
• 1972

As a series of the studies of EPDM-Polymer blends, the experiments are concentracted to the investigation of the physical properties of the EPDM-NBR blends. The results are shown as follows; 1. As EPDM addition ratio is increased, the physical properties such as resistance to ozone and aging have also improved, on the other hand, elongation and abrasion resistance decreased. 2. Tear strength is less influenced by blending and character after aging exhibited the same result. 3. Tensile strength decreased with increase in EPDM contents, especially the ratio of EPDM/NBR are 50/50 and 75/25.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.1-7
• /
• 2003

In this study, fiber mechanical pretreatment before refining was executed with the addition of papermaking addiditives to find synergistic effects on fiber property improvement. Three fiber furnishes (SwBKP, KOCC, and BCTMP), and five different additives (CMC, CPAM, PEO, NaOH, $Na_2O_2$) were used. It was confirmed again that fiber mechanical pretreatment using Hobart mixer was a special way to modify fiber properties, where fiber WRV (water retention value) increases without losing fiber length. For SwBKP, addition of small amount of CMC (0.2％ OD basis), and for KOCC, PEO (0.2％ OD basis) caused additional significant improvement of the fiber furnish properties, respectively. Other additives did not cause adverse effects on the mechanical pretreatment, or better. For BCTMP, NaOH addition followed by mechanical pretreatment caused more than 20％ improvement in tensile and tear strength simultaneously, compared to the control. The yellowing caused by the treatment of NaOH on BCTMP could be minimized by using $Na_2O_2$ without losing the positive effect of NaOH.

• 한국의류학회지
• /
• 제21권8호
• /
• pp.1346-1352
• /
• 1997

The purpose of this study was to help the consumer as well as the producer by investigating the properties such as tensile strength, extention, tear strength, wrinkle recovery, drapability, bending property, moisture regain, and shrinkage on commercial polyurethane coated fabrics. Seven commercial polyurethane coated fabrics having various base fabrics were used. The performance properties of base fabrics and polyurethane coated fabrics were measured. The relationships between base fabrics and polyurethane coated fabrics on the performance properties were identified. It was concluded that the properties of polyurethane coated fabric mainly depend on the characteristics of base fabric. Therefore the proper use of base fabric is recommended in order to improve the performance of polyurethane coated fabric.