• Journal of Oral Medicine and Pain
• /
• v.41 no.2
• /
• pp.61-71
• /
• 2016

Purpose: This study was designed to evaluate the comparison between the subjective and the objective evaluation of pain control effect in masticatory muscle pain depending on time and dose change. Methods: The patients were recruited to this study and diagnosed according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). Experimental group were divided into three groups; saline injection group (n=10), morphine 1.5 mg injection group (n=10), and morphine 3.0 mg injection group (n=10). Evaluation list was the subjective pain evaluation (visual analogue scale, McGill pain questionnaire) and the objective pain evaluation (pressure pain threshold [PPT], pressure pain tolerance [PTO]). The subjective and the objective pain evaluation were performed at the times of just before injection, 10 minutes, 30 minutes, 1 hour, 24 hours, and 48 hours after injection. Then, data were statistically analyzed. Results: The results were as follows: 1) There is no statistically significant difference between the results of the subjective and the objective pain evaluation with regard to the short-term (within 1 hour) analgesic effect of morphine sulfate. 2) However, after 1 hour of injection, while the subjective pain evaluation score still decreased, the objective pain evaluation didn't show significant changes in PPT and PTO (1 hour, p<0.05; 24 hours, p<0.01; 48 hours, p<0.001). 3) In comparison to changes in the dose, the McGill pain questionnaire was the most statistically effective method among the subjective pain evaluations (1.5 mg, p<0.05; 3 mg, p<0.01). Conclusions: Therefore, it was revealed that the subjective pain evaluation was more effective to evaluate long-term pain control, and that the McGill pain questionnaire could be an effective way to evaluate pain control depending on dose changes. It requires further investigations with time and dose extension.

• Journal of Oral Medicine and Pain
• /
• v.37 no.3
• /
• pp.169-182
• /
• 2012

This study was designed to evaluate the pain control effect by morphine injection to masticatory muscle pain patients. Patients with masticatory muscle pain visited the Department of Oral Medicine, Kyung Hee University Dental Hospital were recruited to this study and diagnosed by RDC/TMD. Experimental group were divided into three group; saline injection group(n=10), lidocaine injection group(n=10) and morphine injection group(n=10). Evaluation list was the subjective pain evaluation(visual analogue scale, Mc Gill pain questionnaire, pain drawing) and the objective pain evaluation(pressure pain threshold, pressure pain tolerance) and evaluation time was injection before, after 10min, 30min, 60min and then it was analyzed statistically. The results were as follows : 1. The subjective pain evaluation and the objective pain evaluation were significantly different statistically in within subject effects(p<0.001). 2. The subjective pain drawing evaluation(p<0.001) were significantly different statistically in between subject effects. 3. The objective pressure pain threshold evaluation(p=0.025) were significantly different statistically in between subject effects. 4. The morphine injection group(p=0.001) were more significantly different than the saline injection group statistically in the subject pain drawing evaluation. Therefore, it was considered that the morphine injection was effective to pain control for masticatory muscle pain patients within 60 minute.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.169-183
• /
• 2003

According to our recent investigation that the increase in the occlusal vertical dimension made the appendage muscle strength got higher, the occlusal appliances were made by increasing the occlusal vertical dimension "from the centric relation" position of the mandible. In this experiment, the authors tried to study the change in the appendage muscle strength due to increase in occlusal vertical dimension from intercuspal position(ICP) of mandible with the same subjects and manner as the former experiment. For this study, ten male athletes in a mean age of 23 year who were joined the former study were selected. All the subjects had a complete or almost complete set of natural teeth and reported no subjective symptoms of temporomandibular disorders. Upper and lower casts were mounted on the semi-adjustable articulator at the intercuspal position and a point was marked on the attached gingival area between the right canine and the right 1st. premolar in each upper and lower cast. From the points, the occlusal vertical dimension was increased by 2mm, 3.5mm and 5mm, and then each 10 maxillary type occlusal splint at each 3-increased position were fabricated with heat curing clear acrylic resin. Including the intercuspal position, the 3 kinds of occlusal splints were placed on the subjects individually, and then isokinetic muscle strength on 7 parts of the human appendage which are shoulder, knee, ankle, wrist, forearm, elbow and hip was measured with the CYBEX 6000 SYSTEM (Lumex, NewYork, USA). The results were as follows: The highest mean value in muscular strength was shown at the position of 2mm-increased vertical dimension. The muscle strength during internal/external rotation of shoulder and knee, plantarflexion of ankle, flexion of elbow, and flexion and extension of hip at the increased occlusal vertical dimension position were significantly higher than them at the intercuspal position (p<0.05). Only in view of the increase in the appendage muscle strength, regardless of the way of making the occlusal splints by elevating the occlusal vertical dimension from the centric relation position or intercuspal position, the occlusal splints had an effect on the increase of isokinetic muscle strength at the occlusal vertical dimension which increased within the proper range on the habitual arc of closure.

• Journal of Oral Medicine and Pain
• /
• v.31 no.1
• /
• pp.91-99
• /
• 2006

This study was performed to investigate about sleep quality and orofacial pain pattern between experimental and control group. 101 subjects with temporomandibular disorders without any psychologic and neurologic problem were selected from the patients presented to Wonkwang University dental hospital. Routine clinical examination for TMD was carried out, especially for the frequency of headache and the craniocervical muscles were also done by the author in the first visit. All the subjects filled out the questionnaires, that was, for the evaluation of sleep quality using Pittsburgh sleep quality index(PSQI), and for the analysis of behavioral pain scale questionnaires. Data obtained were statistically processed by the SPSS Windows program and the results of this study were as follows: 1. Subjective sleep index, sleep latency, sleep disturbance, global score in control group were significantly lower than 2. Subjective sleep index, sleep disturbance, global score in subject with headache were significantly lower than subject without headache(P<0.05). 3. Medicine taker have sleeping drug. Caffeine drinkers was significantly higher in daytime dysfunction, global score than no drinker. 4. It have more frequent head and neck pain, pain spreading, daily life difficult in poor sleeper than good sleeper.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.205-214
• /
• 2000

This study was performed to investigate the relationship between mandibular midline shift and anteroposterior first molar occlusal relation, and their effects on the mandibular height and the occlusal plane angle. For this study, 49 patients with temporomandibular disorders were selected. They did not show facial asymmetry and their facial midline coincide with maxillary dental midline. Upper and lower mandibular impression were taken and the casts were fabricated. Amount and direction of the mandibular midline shift and the anteroposterior shift between the two occluding first molars were measured on the casts. Several items related to height such as mandibular height from top of the articular surface of the condyle to curve changing point between antegonial notch and mandibular angle, condylar height which was the vertical distance from the articular surface to retroepicondyle of the condyle, and sigmoid height from the deepest point of sigmoid notch to the curve changing point and the occlusal plane angle were also measured on the panoramic and on the transcranial radiographs. Correlation between midline shift and anteroposterior first molar relation and comparison between right and left mandibular height by the midline shift and the first molar relation were analysed by SPSS windows program. The results of this study were as follows : 1. Mean amount of midline shift in the subjects with midline shift were 2.0mm for both side, respectively. The first molar relation of the ipsilateral side of midline shift showed Angle class II tendency and the contralateral side showed Angle class III tendency, which meant drift of the dentition to the side of the midline shift. 2. The occlusal plane angle on the panoramic radiograph were $13.0^{\circ}$ in right, and $12.5^{\circ}$ in left side, and their were no correlation between occlusal plane angle and mandibular midline shift and the first molar occlusal relation. 3. Angle's classification for both sides of the first molar relation were same in about half of all the subjects. Amount of deviation from class I first molar relation, however, were decreased in the contralateral side of observed side. 4. Mandibular height of the ipsilateral side to which mandibular midline shift showed tendency of lower than that of the contralateral side, and there was a tendency that the height was higher in class III subjects, then class II subjects, and lower in class I subjects. However, condylar height did not show any difference in the subjects with midline shift and also show no difference by the first molar occlusal relation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.263-275
• /
• 2022

The loss of posterior occlusal support leads to further complications such as collapsed occlusal plane and reduced vertical dimension, and it may cause problems such as facial appearance change, reduced chewing efficiency, and temporomandibular joint disorders. In such case, it is necessary to re-establish occlusal plane and vertical dimension properly through accurate diagnosis and predictable treatment plan. This case report presents a 71-year-old female, whose occlusal plane was collapsed and posterior restorative space was insufficient. To perform a patient-friendly full mouth rehabilitation, proper vertical dimension and occlusal plane were decided by evaluation of interocclusal space at her physiologic mandibular rest position, swallowing, pronunciation, facial appearance, and the average length of anterior teeth. And then, the fixed provisional restorations were fabricated with the new occlusal position, and evaluated for 5 months with checking adaptation of masticatory muscles and any kind of clinical symptoms occurs or not. After confirmation of functional stability and esthetic satisfaction with the newly established occlusion, final definitive restorations were fabricated and inserted in the mouth. Through the above process, the treatment result was functionally and aesthetically satisfactory.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.113-122
• /
• 2024

The gradual teeth wear with age is a natural phenomenon, but excessive wear beyond physiological levels can lead to vertical dimension loss, occlusal imbalance, temporomandibular joint disorders, and periodontal disease. In such cases, prosthodontic restoration becomes necessary emphasizing the importance of appropriate vertical dimension increase and stable occlusion in central relation (CR). In this case, a 74-year-old patient with clenching and grinding habit had severe teeth wear and after assessing interocclusal distance, wear degree, pronunciation, and facial profile, it was decided to perform full-mouth fixed prosthesis restoration with a 4 mm vertical dimension increase. And the significantly displaced Maximum Intercuspal Position (MICP) caused by parafunctional movements was re-established as a stable mutually protective occlusal relationship at centric relation and after a successful 4 months adaptation to provisional restorations, the final prosthesis was fabricated. During 4months of observation periods, stable occlusion in central relation and mutual protection occlusal relationships were maintained and the patient was satisfied with function and aesthetics, leading to this report.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.441-447
• /
• 2007

Internal derangement of the temporomandibular joint(TMJ) is defined as an abnormal relationship of the articular disc to the condyle. Mandibular manipulation is one of the conservative treatments to be considered first to manage the patients with anterior disc displacement without reduction. Mandibular manipulation is used to increase articular mobility and to restore the displaced disc into an anatomically normal position. While Farrar's technique has been popularly used, Minagi et al., Mongini and Suarez introduced the manipulation technique conducted by the patients themselves. But there is no study on the efficacy of self-manipulation technique, comparing with conventional one. The aim of this study was to investigate the efficacy of the conventional and self-manipulation technique, which was modified to complement the previously described technique by Minagi et al., in the treatment of patients with anterior disc displacement without reduction. TMD patients, who visited Department of Oral Medicine of Seoul National University Dental Hospital from December, 2002 to November, 2004 and were diagnosed as anterior disc displacement without reduction by TMJ magnetic resonance imaging (MRI) were enrolled. Conservative treatments including physical therapy, exercise, behavioral therapy, stabilization splint therapy, and manipulation therapy were done to every single patient until the symptomsimproved enough to discharge the patient. The charts were reviewed retrospectively according to the type of manipulation. In the results, patients whose maximum mouth opening was more than 40 mm was higher in the self-manipulation group(69.9%) than in the conventional manipulation group(42.9%). But difference between two groups was not significant. According to the fact that we decided to discharge the patients whentheir mouth opening increased to more than 40 mm and subjective symptoms such as pain and discomfort were improved as well, treatment period of discharged patients was significantly shorter in the self-manipulation group($29.2{\pm}12.3$ weeks) than in the conventional manipulation group ($61.0{\pm}38.0$ weeks) (p<0.01). In conclusion, in the treatment of TMD patients with anterior disc displacement without reduction, the self-manipulation technique which is performed by patients themselves is an effective treatment modality for increasing the range of mouth opening and shortening the total treatment period.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.337-344
• /
• 2005

A tactile sensor employs a piezoelectric element to detect contact frequency shifts and thereby measure the stiffness or softness of material such as tissue, which allows the sensor to be used in many fields of research for urology, cardiology, gynecology, sports medicine and caner detection and especially for cosmetics and skin care. In this study, reliability of the tactile sensor system was investigated with its manual application to the muscles susceptible to temporomandibular disorders. Stiffness and elasticity of anterior temporalis, masseter and trapezius muscles were calibrated bilaterally from 5 healthy men with an average of 24.5$\pm$0.94 years. The tactile sensor used in this study had a computer-controlled and motor-driven sensor unit which automatically pressed down on the skin surface over the muscles being measured and retracted, thereby providing the hysteresis curve. The slope of the tangent of the hysteresis curve (${\Delta}f/{\Delta}x$) is defined as stiffness of the muscle being measured and the distance between the two parts of the curve as its elasticity. To determine inter-examiner reliability, all the measurements were performed by the two examiners A and B, respectively and the same examination were repeated with an interval of 2 days for intra-examiner reliability. The results from this study demonstrated high reliability in measuring stiffness and elasticity of anterior temporalis, masseter and upper trapezius muscles using a tactile sensor system. It is suggested that the tactile sensor system can be a highly reproducible and effective instrument for quantitative evaluation of the muscle in head and neck region.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.411-426
• /
• 2005

The purpose of this study was to investigate the effects of occlusal condition and clenching level on the mandibular torque rotational movement. For this study, healthy 14 men without any symptoms and signs of temporomandibular disorders were selected. Mandibular torque rotational movement was observed in each circumstance of combination of three occlusal conditions such as natural dentition, with wafer of 3.6 mm thickness, and wafer with resin stop of 14 mm thickness total during hard biting of bite stick at maximum voluntary contraction(MVC) and 50% of MVC level of surface EMG activity of masseter muscle. Electromyographic activity and mandibular torque rotational movement were observed using BioEMG and BioEGN in $BioPak^{(R)}$ system. Each biting movement in each circumstance was composed of clenching one time and hard biting of wooden stick two times. The observed items were opening distance, velocity and amount of torque rotational movement in mandibular movement, and the data were statistically processed with $SPSS^{(R)}$ windows (ver.10.0). The results of this study were as follows: 1. There were no differences in the mandibular movement distance between those value in both biting sides, and between those in both clenching forces, but the mandibular velocity showed a different results by clenching force. For the amount of torque rotational movement, there were no difference in the value of the frontal plane but some significant difference was in the value of the horizontal plane by biting side. 2. The mandibular movement distance and the mandibular velocity in both planes were higher by maximum voluntary contraction than those by half maximum voluntary contraction, and amount of torque rotational movement in the horizontal plane was also increased by maximum voluntary contraction. 3. The opening distance in both planes were decreased with the increase of vertical dimension of occlusion, namely, by the occlusal appliances, and this pattern was also showed in the mandibular velocity in case of hard biting by maximum voluntary contraction. However, the amount of torque rotational movement were not different by the increase of vertical dimension of occlusion. 4. The value of angle and distance of the torque rotational movement in the hard biting of wooden stick were generally higher than those in the clenching without wooden stick in both planes without regard to occlusal conditions and/or clenching forces.