• Proceedings of the Korean Society of Crop Science Conference
• /
• 2000.11a
• /
• pp.28-45
• /
• 2000

It was unusual crop weather for 1998 and 1999 compared with normal in Korea. The consecutive days of the optimum ripening period for rice plant that had daily mean temperature 21-23C for 40 days after heading, increased with long anomalies in 1998-99. The air temperature during ripening period was much higher than the optimum temperature and lower sunshine hour than normal in the local adaptability tests of newly developed rice lines during those years. In response of rice cultivation to warming and cloudy weather during crop season, the yield shall be decreased. Most scientists agree that the rate of heating is accelerating and temperature change could become increasingly disruptive. Weather patterns should also become more erratic. Agrometeorologists could be analyzed yearly variations of temperature, sunshine hour and rainfall pattern focused on transient agroclimate change for last a decade. Rice agronomists could be established taking advantage of real time agricultural meteorology information system for fertilization, irrigation, pest control and harvest. Also they could be analyzed the characteristics of flowering response of the recommended and newly bred rice cultivars for suitable cropping plan such as cultural patterns and sowing or transplanting date. Rice breeders should be deeply considered introducing the characteristics of basic vegetative type of flowering response like Tonsil rices as prospective rice cultivars corresponding to global warming because of the rices needed higher temperature at ripening stage than Japonica rices, photoperiod sensitive and thermo-sensitive ecotypes

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.432-437
• /
• 2001

It is necessary to improve mechanical and optical porperties in the optical disk substrates as the information storage devices with high storage density using blue laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates for quality recording and read-out. In the present research, the effects of processing conditions and the insulation layer thickness on gapwise birefringence and the land-groove pattern were investigated. It was found that the values of the birefringence distribution were very sensitive to mold temperature history, and the level of birefringence reduced and, furthermore, the quality of replication was improved due to the insulation layer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.631-636
• /
• 2002

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage devices with high storage density using blue laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates for quality recording and read-out. In the present research, the effects of mold temperature and the insulation layer thickness on gapwise birefringence and the land-groove pattern were investigated. It was found that the values of the birefringence distribution were very sensitive to mold temperature history, and the level of birefringence reduced and, furthermore, the quality of replication was improved due to the insulation layer.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.221-224
• /
• 2003

Recently, the market share of the thin-film-transistor liquid-crystalline-display (TFT-LCD) is growing rapidly in display device market. The backlight unit is used as a light source of TFT-LCD module. A light-guide is one of several important components of backlight unit. The manufacturing technology and optical system design of the light guide is very sensitive to quality and cost of the TFT-LCD module. In the present study a new manufacturing method which is called as direct surface forming(DSF) has been tested under various conditions. The result of this test, V-groove pattern shows different shapes depends on the temperature of mold surface, contact time of mold and depth of V-groove.

• BMB Reports
• /
• v.41 no.3
• /
• pp.248-253
• /
• 2008

Stresses and nutritional starvation are two main external signals for the induction of sex pheromones in the fission yeast Schizosaccharomyces pombe. In an attempt to identify the components involved in transduction of starvation signals, we screened 135 temperature-sensitive (ts) mutants and isolated 6 mutants that induced the pheromone even in the presence of a nitrogen source. These mutants exhibited two distict induction phenotypes: pheromone induction at restrictive but not at permissive temperatures; and pheromone induction at both permissive and restrictive temperatures. The times required for the maximum pheromone induction at the restrictive temperature differed slightly in each mutant. In addition to the pheromone induction phenotype, the ts243 and ts304 mutants exhibited cell-division-cycle defects. The ts304 mutant cells showed an abnormal cytoplasmic DAPI staining pattern. The nucleolus of this mutant seemed to be fragmented, a phenomenon which is typically observed in aged yeast cells. The result of our genetic analysis indicated that the pheromone induction mutants belonged to 6 separate complementation groups. We designated these mutants pws1 to pws6.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.9
• /
• pp.698-706
• /
• 2006

Experiment and numerical calculation have been peformed to investigate mixed convection heat transfer between inclined parallel plates. Particle image velocimetry (PIV) with thermo-sensitive liquid crystal (TLC) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature fields at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. The governing equations are discretized using the finite volume method. The results are presented for the Reynolds number ranges from 0.004 to 0.062, the angle of inclination, ${\Theta}$, from 0 to 45 degree and Prandtl number of the high viscosity fluid is 909. The results show velocity, temperature and mean Nusselt numbers distributions. It is found that the periodic flow of mixed convection between inclined parallel plates is shown at $0^{\circ}{\leq}{\Theta}<30^{\circ}$, Re<0.062, and the flow pattern can be classified into three patterns which depend on Reynolds number and the angle of inclination. The minimum Nusselt numbers occur at Re=0.05 regardless of the angle of inclination.

• Fisheries and Aquatic Sciences
• /
• v.16 no.1
• /
• pp.25-34
• /
• 2013

Early ontogenic development in Siberian sturgeon Acipenser baerii was documented and the effects of different temperatures on embryonic and prelarval development were examined. Photograph-assisted data on morphogenesis in Siberian sturgeon prolarvae agreed well with published descriptions of their ontogeny and ecological behaviors, although certain aspects of differentiation, such as gill covering and scute development, could be rearing condition-sensitive. The present study provides the first characterization of the transient development of teeth during early larval stages; the pattern was congruent with the transition of prolarvae to exogenous feeding. From examinations of embryonic and prelarval development under different temperature conditions ($12-24^{\circ}C$), developmental speed was inversely related with temperature. Overall, hatchability was higher and hatching events were more synchronized at $20^{\circ}C$ than at lower temperatures. After hatching, similar patterns of temperature-dependency were observed in yolk sac absorption and the evacuation of the pigment plug. Our results suggest that the incubation of Siberian sturgeon embryos and prolarvae at temperatures close to $20^{\circ}C$ would be advantageous in hatcheries, based on reductions in the duration and uniformity of egg and prolarval developmental stages.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.47-54
• /
• 2009

These clays, because of world economy recession, exports decreased rapidly and manufacturing industry growth fell into negative. Industrial power consumption has been reduced about 7[%] that forms 53[%] of total load demand in Korea. And also, daily load pattern has been changed in several ways because of power consumption decrease influenced by domestic demand recession and heating power load decreased by the rise in temperature. This research analyzes, by analyzing maximum load demand, average load demand, load pattern based on relative factor, and load sensitiveness in accordance with temperature, that maximum load demand is more sensitive to atmospheric temperature than GDP growth rate and average load demand tends to be reduced according to GDP growth rate. I suppose KPX could operate the network system economically and safely by forecasting load demand in winter and summer seasons based on the results.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.33-39
• /
• 2005

Experiments are performed to study the mixed convection flow and heat transfer in an inclined parallel plates with the upper part cooled and the lower part heated uniformly. The Reynolds number ranges from $4.0{\times}10^{-3}\;to\;6.2{\times}10^{-2}$, the angle of inclination, ${\theta}$, from 0 to 45 degree from the horizontal line, and Pr of the high viscosity fluid is 909. In this paper, the PIV(Particle image velocimetry) with TLC(Thermo-sensitive liquid crystal) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature field at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. This paper describes the methods, and presents the quantitative visualization of mixed convection. From this study, it is found that the flow pattern can be classified into three patterns which are affected by Reynolds number and the angle of inclination.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.83-89
• /
• 2009

Multiplication and spore production of three microsporidia(Nosema bombycis, Nosema sp. 1 and Nosema sp. 2) in selected tissues of pupa and adult of silkworm, Bombyx mori L. were studied in two seasons (SI, SII) with distinct temperature (SI: $20.1{\pm}0.8^{\circ}C$ and SII: $25.1{\pm}0.7^{\circ}C$) regimes. Multiplication of the microsporidia followed a logistic pattern with a lag phase, an exponential phase and a stationary phase. In SII, spore production was significantly (P<0.01) higher in various tissues. Highest spore production was observed 30 days post inoculation (p.i.) in SI and in SII, it was $21{\sim}23$ days p.i. Spore production was significantly (P<0.01) higher in the gut tissues than other tissues. Nosema sp. 2 registered significantly (P<0.01) higher spore production in both the seasons compared to Nosema bombycis and Nosema sp. 1. Results indicate that the multiplication and spore production of microsporidia are tissue specific and extremely sensitive to the temperature at which the host is reared. Through this study, the precise day that the spore numbers of the microsporidia are maximized can be predicted in both pupa and adult in case the infection is initiated in the first instar.