• 제목/요약/키워드: temperature-dependence

검색결과 2,092건 처리시간 0.033초

Cobalt를 첨가한 $Cd_4GeS_6$ 단결정에서 Energy Gap의 온도의존성 및 열역학적 함수 추정 (Temperature Dependence of Energy Gap and Thermodynamic Function Properties of Coblt-doped $Cd_4GeS_6$Single Crystals)

  • 김덕태
    • 한국전기전자재료학회논문지
    • /
    • 제11권9호
    • /
    • pp.693-699
    • /
    • 1998
  • In this work $Cd_4GeS_6:Co^{2+}$(0.5mole%) single crystals were grown by the chemical transporting reactiov(CTR) method using high purity(6N) elements. The grown single crystals crystallized in a monoclinic structure(space group Cc). The direct optical energy gap of this single crystals was found to be 2.445eV at 300K and the temperature dependence of optical energy gap was fitted well to Varshni equation. But at temperatures lower than 70K an anomalous temperature dependence of the optical energy gap was obtained. This anomalous temperature dependence accored well with the anomalous temperature dependence of the unit cell volume. Also, the entropy, enthalpy and heat capacity were deduced from the temperature dependence of optical energy gaps.

  • PDF

Al-Li합금의 항복응력에 대한 변형속도 및 온도의존성에 관한 연구 (A Study on the Strain Rate and Temperature Dependence of Yield Stress of Al-Li Alloy)

  • 오창섭;한창석
    • 열처리공학회지
    • /
    • 제24권6호
    • /
    • pp.311-317
    • /
    • 2011
  • The effect of strain rate on the yield stress of an Al-Li alloy has been investigated at temperatures between 77 and 523 K and over the strain rate range from $1.77{\times}10^{-4}s^{-1}$ to $1.77{\times}10^{-2}s^{-1}$. At testing temperatures below 373 K, the yield stress is almost independent of strain rate at any aging stage. At testing temperatures above 373 K, the yield stress increases linearly with the logarithm of strain rate, and the strain rate dependence increases with increasing testing temperature. The yield stresses of under-aged alloy at temperatures between 373 and 473 K at high strain rates are greater than the yield stress at 77 K. For the alloy under-aged or aged nearly to its peak strength, the temperature range within which the positive temperature dependence of yield stress appears expands to the higher temperature side with increasing strain rate. The strain rate dependence of the yield stress is slightly negative at this aging stage. The yield stress of the over-aged alloy decreases monotonically with decreasing strain rate and with increasing testing temperature above 373 K. The modulus normalized yield stress is nearly constant at testing temperatures below 373 K at any strain rate investigated. And, strength depends largely both on the aging conditions and on the testing temperature. The peak positions in strength vs. aging time curves shift to the side of shorter aging time with increasing testing temperature. For the specimens aged nearly to the peak strength, the positive temperature dependence of yield stress is observed in the temperature range. The shift of peak positions in the aging curves are explained in terms of the positive temperature dependence of cutting stress and the negative temperature dependence of by-passing stress.

Description of Temperature Dependence of Critical Micelle Concentration

  • Kim, Hong-Un;Lim, Kyung-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권10호
    • /
    • pp.1449-1454
    • /
    • 2003
  • A new equation has been derived on the basis of ${\delta}G^o$ = -RT lnK, linear behavior of the enthalpy of micellization with temperature, and the Gibbs-Helmholtz relation. It describes correctly the dependence of critical micelle concentration $(X_{CMC})$ on temperature and has yielded excellent fitting results for various surfactant systems. The new equation results in the linear behavior of the entropy of micellization with temperature and accounts for the compensation phenomena observed for the micellization in aqueous solutions, along with the linear dependence of the enthalpy of micellization on temperature. These results imply that the new equation of $X_{CMC}(T)$ accounts for the temperature dependence of CMC correctly.

나노유체 열전도율의 온도의존성 평가를 위한 비정상열선법의 시험방법 (Validation Test for Transient Hot-wire Method to Evaluate the Temperature Dependence of Nanofluids)

  • 강경민;이신표
    • 대한기계학회논문집B
    • /
    • 제31권4호
    • /
    • pp.341-348
    • /
    • 2007
  • One of the controversial research issues on nanofluids is the temperature dependence of the thermal conductivity of nanofluids, that is, whether it will increase or decrease according to the temperature rise. To evaluate precisely the thermal conductivity behavior of nanofluids, a systematic way of validation experiments for the measuring instrument has been highly recommended. In this paper, procedure of the validation test for transient hot-wire method using the temperature dependence of the base fluids was explained comprehensively and the comparison of the temperature dependence of water-$Al_2O_3$ nanofluids is made between the present work and that of Das et al.

파라핀족탄화수소의 폭발하한계의 온도의존성 예측 (Prediction of Temperature Dependence of Lower Explosive Limits for Paraffinic Hydrocarbons)

  • 하동명
    • 한국안전학회지
    • /
    • 제15권3호
    • /
    • pp.71-77
    • /
    • 2000
  • The aim of this study is to investigate the temperature dependence of the lower explosive limit(LEL) at elevated temperature. The temperature dependence of the lower explosive limit is one of the significant indices of flammability and combustibility. By using the literature data, the new equations for predicting the temperature dependence of the lower explosive limits for paraffinic hydrocarbons are proposed. The values calculated by the proposed equations were a good agreement with the literature data. It is hoped eventually that this proposed equations will support the use of the prediction for the lower explosive limit and the flash points of the flammable mixtures.

  • PDF

Temperature Dependence of Galvanomagnetic Properties in Thin Bi Film

  • Nam, S.W.
    • Journal of Magnetics
    • /
    • 제4권4호
    • /
    • pp.111-114
    • /
    • 1999
  • Numerical calculation for temperature dependence of galvanomagnetic properties of thin bismuth films is pursued. The quasi-two dimensional system is treated in the perturbation formalism of previous study, where realistic screened potential due to impurity is assumed to be the only scattering channel. The potential is separated into pure two dimensional part and the remaining presumed perturbation part. Relaxation time and mobilities for both electron and hole are evaluated, then temperature dependence of the Hall coefficient and magnetoresistance is obtained. The broad minimum of magnetoresistnace is manifested, and the interpretation under the kinetic theory is made. Thickness dependence of the quantities are also shown, which are in good agreement with the expected quantum size effect.

  • PDF

Viscosity Prediction of Synthetic Lubricants from Temperature and Pressure Dependence of Dielectric Relaxation Time

  • Suzuki, A.;Masuko, M.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.355-356
    • /
    • 2002
  • The dielectric permittance and the dielectric loss factor of several lubricating oils were measured at frequencies from 100 Hz to 1.5 MHz. The measurements were carried out under atmospheric pressure as a function of temperature and under fixed temperature as a function of pressure. Temperature and pressure dependence of dielectric relaxation time were investigated. The temperature dependence of relaxation time obeyed the Vogel-Fulcher-Tammann (VFT) law. We modified the VFT equation in order to express the dielectric relaxation time as a function of temperature and pressure. Furthermore. by taking into consideration the similarity of the temperature and pressure dependence between dielectric relaxation and mechanical relaxation. the prediction of high-pressure viscosity were conducted. The predicted results were compared with the viscosity data obtained from the falling-sphere type viscometer.

  • PDF

상대습도계의 온도 의존성과 경년변화의 통계적 분석 (Statistical Analysis on the Temperature Dependence and Long-Term Change of Relative Humidity Sensors)

  • 김종철;최병일;우상봉;양인석
    • 센서학회지
    • /
    • 제21권6호
    • /
    • pp.420-424
    • /
    • 2012
  • We have investigated temperature dependence and long-term change of humidity measurement from 32 relative humidity sensors. The readings of the humidity sensors depended not only the reference humidity, but also temperature of the chamber. Approximately, the temperature dependence of the humidity sensor in average was 0.05 %R.H./$^{\circ}C$ in the temperature range from $5^{\circ}C$ to $55^{\circ}C$. For humidity sensors that have an internal temperature compensation circuit, the resulting temperature dependence was weaker by 20%. It should be also noted that for the humidity sensors used in this work underwent ${\pm}3$ %R.H. change per year for level of confidence of 95%. The users of relative humidity sensors may refer this value as a minimum change when they set the calibration interval of the humidity sensors.

Temperature Dependence of the Electro-optic Characteristics in the Liquid Crystal Display Switching Modes

  • Jeon, Eun-Jeong;Srivastava, Anoop Kumar;Kim, Mi-Young;Jeong, Kwang-Un;Choi, Jeong-Min;Lee, Gi-Dong;Lee, Seung-Hee
    • Journal of Information Display
    • /
    • 제10권4호
    • /
    • pp.175-179
    • /
    • 2009
  • As the physical properties of nematic liquid crystals vary with respect to temperature, the performances of liquid crystal displays (LCDs) are highly dependent on temperature. Additionally, it is well known that the electro-optic characteristics of LCDs, such as transmittance and threshold voltage, also rely on the LCD switching modes. The temperature dependence of the electro-optic characteristics of the wide-viewing-angle LCD modes, such as in-plane switching (IPS), multidomain vertical alignment by patterned electrode (PVA), and fringe-field switching (FFS), have been studied, and the results showed that the FFS mode has lower temperature dependence compared to the IPS and PVA modes. Since the liquid crystal (LC) reorients in different ways in each mode, this result is associated with the temperature dependence of LC's bend and twist elastic constants, and also with the position of the main reorientation, either in the middle or on the surface of the LC layer.

아라미드계 절연지(Aramid paper)의 온도의존성과 전압의존성 (Temperature dependence and Voltage dependence of Aramide Paper)

  • 박형준;이종필;박희두;신종열;이수원;홍진웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.465-468
    • /
    • 2004
  • In this paper, the properties of temperature dependence and voltage dependence of Aramid paper were studied to understand electrical characteristics, to be regarded as the excellent insulation. Aramid paper and pressboard had being applied various motor, generator. We used to Finite Elemental Method of simulation tool, and improved optimal insulating design of insulating Aramid according to calculated those.

  • PDF