• Korean Journal of Optics and Photonics
• /
• v.24 no.3
• /
• pp.111-119
• /
• 2013

A large aspheric mirror is a key component for large astronomical telescopes and high resolution satellite cameras. Since it is large and has an aspheric form, it is much more difficult to fabricate it compared to the similar size of spherical mirror. Especially, the opto-mechanical design and analysis is critical to reduce the deformation of mirror surface due to the external forces such as gravity or temperature change, as the mirror size is larger and lightweighting ratio is increased. The design requirements for the mirror are different depending on the particular ground and space applications because the environmental conditions are changed. In this paper, we explain the opto-mechanical design and analysis for ground and space applications that are among the most difficult to achieve among several technologies related to development of the large aspheric mirror.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.514-518
• /
• 2006

We have transferred highly stable 100 MHz RF through a 23 km fiber network. The fiber-induced phase noise due to the vibration and the temperature fluctuation in the optical path is detected and is compensated by configuring a noise-canceling servo. The transfer instability was $6{\times}10^{14}$ at 1 s of averaging time and $2{\times}10^{-17}$ at 10000 s of averaging time. The single sideband phase noise was greatly reduced by more than 20 dB below the Fourier frequency of 1 kHz. The transferred RF has nearly the same stability as the original reference frequency.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.105-111
• /
• 2019

In South Korea, smoke control systems are designed according to the fire safety standards NFSC501 and NFSC 501A. However, there is a problem in that the design values are incompatible when measuring the performance of the system after the design construction for calculating the leakage crack area described in the standards. Therefore, we compared the standards for smoke control systems from South Korea, Japan, and the United Kingdom. In South Korea, designs are conducted uniformly according to the NFSC 501A Manual, but in Japan and the United Kingdom, designs consider smoke temperature, duct loss, and fire floor air supply. Furthermore, they use larger values than in South Korea.

• Applied Science and Convergence Technology
• /
• v.25 no.3
• /
• pp.56-60
• /
• 2016

The ALD process is an adequate technique to meet the requirements that come with the downscaling of semiconductor devices. To obtain thin films of the desired standard, it is essential to understand the thermal decomposition properties of the precursors. As such, this study examined the thermal decomposition properties of TEMAHf precursors and its effect on the formation of $HfO_2$ thin films. FT-IR experiments were performed before deposition in order to analyze the thermal decomposition properties of the precursors. The measurements were taken in the range of $135^{\circ}C-350^{\circ}C$. At temperatures higher than $300^{\circ}C$, there was a rapid decrease in the absorption peaks arising from vibration of $Sp^3$ C-H stretching. This showed that the precursors experienced rapid decomposition at around $275^{\circ}C-300^{\circ}C$. $HfO_2$ thin films were successfully deposited by Atomic Layer Deposition (ALD) at $50^{\circ}C$ intervals between $150^{\circ}C$ to $400^{\circ}C$; the deposited films were characterized using a reflectometer, X-ray photoelectron spectroscopy (XPS), Grazing Incidence X-ray Diffraction (GIXRD), and atomic force microscopy (AFM). The results illustrate the relationship between the thermal decomposition temperature of TEMAHf and properties of thin films.

• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.101-116
• /
• 2003

The study was conducted to establish hygienic standards of salad items for pizza restaurant located in Seoul by applying HACCP system during the summer of 2000. The study measured temperature, time, pH, Aw and microbial assessments. The hygienic conditions of the kitchen and workers were on the average(1.21, 1.0 out of 3 pts.), but some improvement should be made: separate use of trash can and leftover disposal, separate use of knives and cutting boards, habits for hand washing and wearing hygienic gloves. For salad production, all procedures were peformed under food safety danger zone ($5{\~}60^{\circ}C$). The ingredients were mostly above pH 5.0 and high in Aw($0.94{\~}0.99$). Microbial assessments for salad production revealed that TPC($1.8{\times}10^3{\~}1.0{\times}10^{10}CFU/g$) and coliforms($1.5{\times}10{\~}5.2{\times}10^5 CFU/g$) exceeded the standards by Solberg et al.(TPC: $10^6CFU/g$, coliforms: $10^3CFU/g$). S. aureus was not detected but Salmonella was found in three food items(egg, macaroni and macaroni salad). Moreover, the workers' hands contained 3.1 104 CFU/g of TPC and 4.2 102 CFU/g of S. aureus requiring further remedy since it exceeded the safety standards suggested by Harrigan and McCance (500 CFU/g of TPC per $100cm^2$ and 10 CFU/g of coliforms per $100cm^2$). According to the critical control point(CCP) decision tree analysis, vegetable receiving, vegetable holding, mixing, display on coleslaw, macaroni draining, display on macaroni salad, egg peeling & cutting, apple cutting, and display on salad bar were determined as CCPs. From the findings it would be suggested that purchase of Quality materials, short holding and display time, storing food at right temperature, using sanitary cooking utensils, and improvement of workers' food handing practices are needed to ensure the safe salad production in this specific pizza restaurant.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.195-201
• /
• 1999

C-axis oriented $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) thin films were grown on $Al_2O_3$ (alumina and R-plane sapphire) substrates by a pulsed laser deposition method. The crystallinity of the $CeO_2$ buffer layer on sapphire substrate exhibit a strong dependence on the deposition temperature, resulting in the growth of a-axis orientation at $800^{\circ}C$. The superconducting properties of YBCO thin films on $Al_2O_3$ substrates showed strong dependence on both thickness and crystallinity of the $CeO_2$ buffer layer. Critical temperature of YBCO film on alumina substrate was ${\sim}83\;K$. In the case of R-plane sapphire substrate,

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.136-140
• /
• 2011

Mechanical properties of degraded materials must be measured for evaluating the integrity of the facilities operating at high temperature. In fact it is complicated to obtain the different degraded specimens from an operating facility. Specimens of 1Cr-0.5Mo steel prepared by the isothermal heat treatment at $700^{\circ}C$ were tested, which has been widely used as tubes for heat exchangers and as plates for pressure vessels. The magnetic properties and Rockwell hardness (HRB) were measured at room temperature. The peak interval of Barkhausen noise envelope (PIBNE), coercivity, and hardness decreased with the increase of degradation. The magnetic and mechanical softening of matrix is likely to govern the properties of the specimen more than the hardening of grain boundary by carbide precipitations. The degradation of test material may be determined by the linear correlation of PIBNE and HRB. Degradation of 1Cr-0.5Mo steel could well be nondestructively evaluated by PIBNE measured with surface type probe.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2019

In response to the recent increase in demand for hydrogen stations, the Ministry of Trade and Industry has enacted and promulgated special notifications to enable the installation of hydrogen stations in the form of the combined complex in existing automotive fuel supply facilities such as LPG, CNG, and gas stations. Hydrogen multi energy filling stations haven't been operated yet in Korea till the establishment of special standards, so it is necessary create special standards by considering all Korean environmental characteristics such as four seasons and daily crossings. In this study, we collected and analyzed the charging data of Ulsan LPG-Hydrogen Multi Fueling Station installed for the first time in Korea. The data are hourly temperature and pressure data from compressors, storage vessels and dispensers. We used the data collected for a year, including the highest temperature and the lowest temperature in Ulsan to compare seasonal characteristics. As a result, it was found that the change of the outside temperature affects the initial temperature of the vehicle's container of the hydrogen car, which finally affects the charging time and the charging speed of the vehicle. There was no effect on vehicle containers because the limit temperature suggested by the Korean Hydrogen Station Standard(KGS FP217) and the US Filling Protocol(SAE J2601) was not exceeded.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.1-7
• /
• 1992

Deuterium was injected into melt-spun ribbons of ${\alpha}-Fe_{90}Zr_{10}$ using the electrolytic hydrogenation method, and the magnetic properties of these ${\alpha}-D_{x}Fe_{90}Zr_{10}$ ribbons were studied. By comparing these results with those of ${\alpha}-H_{x}Fe_{91}Zr_{9}$, the effects of phonons to magnetic properties were investigated. The Curie temperature $T_{c}$, and the spontaneous magnetizations of the $D_{47}Fe_{90}Zr_{10}$ and the $Fe_{90}Zr_{10}$ were studied using the Mbssbauer spectroscopy. From these investigations, it was found that the Curie temperature of $D_{x}Fe_{90}Zr_{10}$ was 75K higher than that of $Fe_{90}Zr_{10}$. It was believed that this indicated the importance of local deformation to the amorphous magnetism. Also by comparing the spontaneous magnetizations of $D_{47}Fe_{90}Zr_{10}$ with those of $Fe_{90}Zr_{10}$ as a function of temperature, it was found that the deuterium injection reduced the fluctuation of exchange integral.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.245-253
• /
• 2009

For the growth optimization of InAs/GaSb (8/8-ML) strained-layer superlattice (SLS), the structure has been grown under various conditions and modes and characterized by the high-resolution x-ray diffraction (XRD) analysis. In this study, the strain modulation is induced by changing parameters and modes, such as the growth temperature, the ratio of V/III beam-equivalent-pressure (BEP), and the growth interruption (GI), and the strain variation is analyzed by measuring the angle separation of 0th-order satellite peak in XRD patterns. The XRD results reveal that the growth temperature and the V/III(Sb/Ga) ratio are major parameters to change the crystallineity and the strain modulation in SLS structures, respectively. We have observed that the SLS samples with compressive strain prepared in this study are show a transition to tensile strain with decreasing V/III(Sb/Ga) ratio, and the GI process is a sensitive factor giving rise to strain modulation. These results obtained in this study suggest that optimized growth temperature and V/III(Sb/Ga) ratio are $350^{\circ}C$ and 20, respectively, and the appropriate GI time is approximately 3 seconds just before InAs growth that the crystallineity is maximized and the strain relaxation is minimized.