• 설비공학논문집
• /
• 제5권2호
• /
• pp.94-101
• /
• 1993

Recently, efforts of decreasing energy consumption are continously increased and user's preference is also diversified in refrigeration and air conditioning systems. Thus, in order to satisfy these demands, high efficiency, high intelligence, and energy saving for those systems are essential. As the basic study for diverse functions and intelligence of those systems, we investigated the response characteristics through the compressor capacity control concerned with superheat and refrigeration room temperature. And, response characteristics are investigated experimentally by using micro computer based PWM inverter control method. Experimental result of the conventional on-off control method is given in order to be compared to the results of inverter control method. The results obtained through this study are summarized as follows. It is shown from the experimental results of the on-off control method that the range of temperature variation around the steady state ($-18^{\circ}C$) is very large (about $7{\sim}8^{\circ}C$) and the settling time bringing the steady state is not found. In the inverter control method, we can see that the refrigeration room temperature after reaching the setting temperature is very stable without fluctuation and a robust control for disturbance such as opening the door has been realized.

• 한국물환경학회지
• /
• 제35권4호
• /
• pp.332-339
• /
• 2019

A comparative study on the anaerobic digestion efficiency according to the temperature change was conducted considering the characteristics of domestic food wastes with high water content of about 80 % or more. The substrate was tested for anaerobic digestion efficiency in two substrates, a liquid component separated naturally from food waste and food waste itself. In the anaerobic digestion experiments, the digestion efficiency was the highest at $55^{\circ}C$ (thermophilic temperature). However, the digestion efficiency at $45^{\circ}C$(middle high temperature) was lower than that at $35^{\circ}C$(mesophilic temperature). The comparison of general food wastes anaerobic digestion requiring 30 days of hydraulic retention time to the liquid component indicated a stable digestion efficiency even after 15 days of hydraulic retention time.In the experiments conducted on food waste, the digestion efficiency at $55^{\circ}C$ was higher than that at $35^{\circ}C$. When the food waste, especially the liquid component originating from food waste, is treated by anaerobic digestion method, the mesophilic temperature and thermophilic temperature conditions are more favorable in the digestion efficiency than the middle high temperature ($45^{\circ}C$). However, when applying thermophilic or mesophilic temperature anaerobic digestion process operation in the field, the amount of energy input should be considered.

• 센서학회지
• /
• 제28권3호
• /
• pp.177-181
• /
• 2019

Pressure sensors are used in various industries such as automobiles, airplanes, medical equipment, and coolers. Even if the ambient temperature changes, the measurement is reliable and stable. In this study a diaphragm-type pressure sensor was used to derive a temperature-compensated pressure estimation equation for accurate pressure measurement at $100^{\circ}C$ and $-40^{\circ}C$. To understand the characteristics of the pressure sensor diaphragm with respect to temperature and pressure, experiments were conducted in temperature-variable chamber using FEM analysis to confirm that the influence of temperature effect was nonlinear. Based on the experimental results, a nonlinear method for calculating the pressure by compensating for the error due to temperature was derived. The calculated pressure value is lower than 0.5 % at low and high temperatures, and lower than 0.4 % at $22^{\circ}C$, thereby eliminating the effect of temperature.

• 한국식품영양과학회지
• /
• 제26권1호
• /
• pp.60-66
• /
• 1997

Monascus anka가 생산하는 색소는 균체외 적색색소(ERP)와 황색색소(EYP) 그리고 균체내 적색색소(IRP) 와 황색색소(IYP)로 분리되었고 각각의 색소는 특징적인 absorption spectrum을 나타냈다 분리된 4종의 색소의 안정성을 검토한 결과, 암조건, 자외선 그리고 형광하에서는 비교적 안정하였지만 일광하에서는 색소가 급격히 퇴색하는 경향을 나타내 저장시 광차단이 필요함을 알 수 있었다. pH에 대해서는 각 색소가 pH 2.0~12.0 범위에서 비교적 안정하였다. 온도의 영향은 60~8$0^{\circ}C$에서는 비교적 안정하였으나 그 이상의 온도에서는 안정성이 떨어지는 것으로 나타났다. 8종의 유기산 중에 tartaric acid와 citric acid가 홍국색소의 안정성을 저해하는 것으로 나타났고 propionic, formic, acetic, butyric, malonic, malic acid는 비교적 안정하였다. 홍국색소의 변색에 가장 큰 영향을 미치는 금속 이온은 Cu$^{2+}$이었다.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.765-771
• /
• 2012

$SF_6$ gas has been used as arc quenching and insulating medium for high and extra high voltage switching devices due to its high dielectric strength, its excellent arc-quenching capabilities, its high chemical stability and non toxicity. Despite of its significant contributions, the gas was classified as one of the greenhouse gas in the Kyoto Protocol. Thus, many researches are conducted to find out the replacement materials and to develop the $SF_6$ gas useless electrical equipment. This paper describes experiments on the temperature change-related breakdown characteristics of $SF_6$ gas ($SF_6$) and $SF_6$ liquid ($LSF_6$) in a model GIS(Gas-Insulated Switchgear) chamber in order to show the possibility of more stable and safe usages of $SF_6$ gas. The breakdown characteristics are classified into three stages, namely the gas stage of $SF_6$ according to Paschen's law, the coexisting stage of $SF_6$ gas with liquid in considerable deviation at lower temperature, and the stage of $LSF_6$ and remaining air. The result shows that the ability of the $LSF_6$ insulation is higher than the high-pressurized $SF_6$. Moreover, it reveals that the breakdown characteristics of $LSF_6$ are produced by bubble-formed $LSF_6$ evaporation and bubbles caused by high electric emission and the corona. In addition, the property of dielectric breakdown of $LSF_6$ is determined by electrode form, electrode arrangement, bubble formation and movement, arc extinguishing capacity of the media, difficulty in corona formation, and the distance between electrodes. The bubble formation and flow separation phenomena were identified for $LSF_6$. It provides fundamental data not only for $SF_6$ gas useless equipment but also for electric insulation design of high-temperature superconductor and cryogenic equipment machinery, which will be developed in future studies.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1294-1299
• /
• 2000

The combustion characteristics have been investigated to develop the 50 kW-class gas turbine combustor. The combustor design program was developed and applied to design this combustor. The combustion air which has the temperature of 45, 200, $300^{\circ}C$ were supplied to combustor for elucidating the effect of inlet air temperature on CO, NOx emissions and flame temperature. The exit temperature and NO were increased and CO was decreased with increasing inlet air temperature. Also, the effect of equivalence ratio was considered to verify the combustor performance. The emissions of CO and NO with inlet air temperature can be analyzed qualitatively by measuring the temperature inside the combustor. The combustion performance with fuel schedule was evaluated to get the informations of the starting and part loading process of gas turbine. The combustion was stable above the equivalence ratio of 0.18. The pattern factor which is the important parameter of combustor performance was satisfied with the design criterion. Consequently the combustor was proved to meet the performance goal required for the target gas turbine system.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.101-107
• /
• 1995

To improve the leakage current, we developed two step sputtering method where PZT thin film in first deposited at room temperature followed by 600.deg. C deposition. The method used an amorphous PZT layer deposited at room temperature to keep a stable interface during sputtering at high temperature. PZT thin films were deposited on Pt/Ti/SiO$_{2}$/Si substrate at room temperature and 600.deg. C sequentially. The effect of the layer deposited at room temperature was investigated with regard to I-V characteristics and P-E hysteresis loop. In the case of the sample with the layer deposited at room temperature, both leakage current and dielectric constant were decreased. The thicker the layer deposited at room temperature was, the lower dielectric constant was. However, leakage current was indepenent of the variation of the thickness ratio. The sample with 200$\AA$ of the layer deposited at room temperature showed the most promising results in both dielectric constant and leakage current.

• 폴리머
• /
• 제26권6호
• /
• pp.812-820
• /
• 2002

본 연구에서는 나노입자인 카본블랙을 고분자에 분산시킨 복합체를 각각 용액혼합과 용융혼합을 이용하여 positive temperature coefficient (PTC) 특성을 연구하였다. 전도성 나노입자인 카본블랙과 고분자 복합체의 저항 통전 (threshold)은 용융혼합하였을 때 카본블랙의 함량이 35wt% 이상에서 나타났으며. 용액혼합에서는 카본블랙 함량이 40 wt% 이상에서 나타났다. Ethyl-one vinylacetate copolymer (EVA)의 경우, 온도의 변화에 따라서 저항이 서서히 증가하다가 용융점 근처에서 극대값을 나타내었지만, high density polyethylene (HDPE)의 경우는 저항이 온도의 변화에 따라 일정하다가 용융점 근처에서 증가하기 시작하여 용융점에서 극대값을 나타내었다. 통전 후의 낮은 저항과, scanning electron microscopy (SEM)으로 관찰한 결과로부터 전도성 나노입자의 카본블랙 분산방법에서 용액혼합의 분산 정도가 용융혼합 못지않게 나타났다. PTC 소재에 전류인가시 큐리온도에서 1차적으로 저항이 증가하였으며, 고분자의 용융점에서 2차적으로 트립온도가 될 때까지 저항이 증가하다가 트립온도 이후에는 저항이 일정하게 유지됨을 알 수 있었다.

• 한국식품영양과학회지
• /
• 제23권6호
• /
• pp.973-979
• /
• 1994

Microorganisms, including the strain IJ-3 isolated from soil, were found to secrete an extracellular soybean protein coagulating enzyme and the strain, IJ-3 was identified as Genus Bacillus according to the Bergey's manual . The enzyme coagulated protein in soymilk , thus forming a curd at pHs 5.8-6.4 and at 55-75℃. The optimum temperature for soybean protein coagulating activity was 65-75℃ and the enzyme was stable at temperature below 50℃ and was found to be stable with about 60-100% of the original activity at a with pH ranges(pH6-7). The molecular weight of enzyme was estimated to be 28,000 by SDS-PAGE. The curd formed with the enzyme from Bacilus sp. IJ-3 has a smooth texture, and a mild taste without any bitterness or a beany flavor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.834-837
• /
• 2003

In this study, Ohmic contacts make on 3C-SiC using TiN. Ohmic contact resistivity of TiN/3C-SiC was evaluated. Specific contact resistance was calculated by Circular-TLM(transmission line model) method and physics properties were measured using XRD, SEM, respectively. TiN contact is stable at high temperatures and a good diffusion barrier material. The TiN/3C-SiC contacts are thermally stable to annealing temperatures up to $1000^{\circ}C$. The TiN thin-film depostied on 3C-SiC substraes have good electrical properties. Therefore, the TiN/3C-SiC contact can be usefully applied for high-temperature MEMS applications over $500^{\circ}C$.