• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.839-852
• /
• 2018

The purpose of this study is to predict monthly agricultural reservoir storage by developing weather data-based Multiple Linear Regression Model (MLRM) with precipitation, maximum temperature, minimum temperature, average temperature, and average wind speed. Using Naïve-Bayes classification, total 1,559 nationwide reservoirs were classified into 30 clusters based on geomorphological specification (effective storage volume, irrigation area, watershed area, latitude, longitude and frequency of drought). For each cluster, the monthly MLRM was derived using 13 years (2002~2014) meteorological data by KMA (Korea Meteorological Administration) and reservoir storage rate data by KRC (Korea Rural Community). The MLRM for reservoir storage rate showed the determination coefficient ($R^2$) of 0.76, Nash-Sutcliffe efficiency (NSE) of 0.73, and root mean square error (RMSE) of 8.33% respectively. The MLRM was evaluated for 2 years (2015~2016) using 3 months weather forecast data of GloSea5 (GS5) by KMA. The Reservoir Drought Index (RDI) that was represented by present and normal year reservoir storage rate showed that the ROC (Receiver Operating Characteristics) average hit rate was 0.80 using observed data and 0.73 using GS5 data in the MLRM. Using the results of this study, future reservoir storage rates can be predicted and used as decision-making data on stable future agricultural water supply.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.99-115
• /
• 2019

The Royal Tombs at Songsanri is one of the most important historic site for ancient historical study in Korean Peninsula. Since the excavation of the tombs, continuous exposure to the outside environment and the negative effects of the artificial air conditioning system have caused significant threats to the thermal environment stability of the tombs. Unlike the outside temperature that shows significant differences according to seasonal changes, the burial chamber of the tombs had a relatively stable temperature range of 11.4 to $22.2^{\circ}C$ throughout the year, and the standard deviation of temperature was within 3.5. It was revealed that major factors affecting the microclimate of the tombs were inflow of outdoor air, wind direction and speed, and all of them had closely related to airtightness of the tombs. The solar radiation was in inverse proportion to the thickness of burial mounds, and thus Royal Tomb of King Muryeong, which has the thickest burial mound, was least affected by solar radiation. Especially, microclimate of the tombs caused to the highest influence with artificial environmental changes due to access by people, which varied in proportion to the number of accessed people and time of stay. Currently, the inside of the tombs are sealed and always in saturated condition, it is very vulnerable to dew condensation. As a result of analyzing the possibility of condensation in each tomb, all the tomb No. 5, tomb No. 6 and Royal Tomb of King Muryeong had condensation most of the time throughout the year. It is required to make a proper conservation environment for the Royal Tombs at Songsanri.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.1
• /
• pp.29-39
• /
• 2017

In this research, thermal design data such as heat transfer coefficient on the wall surface required for ventilation system design which is to prevent the temperature rise in the underground utility tunnel that three sides are adjoined with the ground was investigated in numerical analalysis. The numerical model has been devised including the tunnel lining of the underground utility tunnel in order to take account for the heat transfer in the tunnel walls. The air temperature in the tunnel, wall temperature, and the heating value through the wall based on heating value(117~468 kW/km) of the power cable installed in the tunnel and the wind speed in the tunnel(0.5~4.0 m/s) were calculated by CFD simulation. In addition, the wall heat transfer coefficient was computed from the results analysis, and the limit distance used to keep the air temperature in the tunnel stable was examined through the research. The convective heat transfer coefficient at the wall surface shows unstable pattern at the inlet area. However, it converges to a constant value beyond approximately 100 meter. The tunnel wall heat transfer coefficient is $3.1{\sim}9.16W/m^2^{\circ}C$ depending on the wind speed, and following is the dimensionless number:$Nu=1.081Re^{0.4927}({\mu}/{\mu}_w)^{0.14}$. This study has suggested the prediction model of temperature in the tunnel based on the thermal resistance analysis technique, and it is appraised that deviation can be used in the range of 3% estimation.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.191-197
• /
• 2010

To improve the curing method of anisotropic conductive film (ACF) at low temperature, it was studied to replace the thermal latent curing agent of imidazole compounds by the curing agent of cationically initiating type. Thermo-mechanical properties such as glass transition temperature, storage modulus, and coefficient of thermal expansion were investigated for the analysis of curing behavior. The reliability of ACF were observed in thermal cycle and high temperature-high humidity test. ACF using cationic initiator showed faster curing, lower CTE, and higher $T_g$ than the case of using imidazole curing agent, which is important for the high temperature stability. Furthermore, ACF using cationic initiator maintained a stable contact resistance in reliability test, although it was cured at low temperature and fast rate. With these results, it was confirmed that the curing method of epoxy had great effect on thermo-mechanical properties and reliability of ACF.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1153-1156
• /
• 2012

Daegwallyeong area to be formed along the mountainous terrain more above 800 m of sea level is known as the cold zone to occur frequently wind, rain and fog. This study to evaluate the stability of crop production and agricultural production potential in the Daegwallyeong was calculated for the low temperature frequency of occurrence and potential evapotranspiration changes with announce the release of Korea Meteorological Administration (KMA) from 1972 to 2009 up to 38 years. Evapotranspiration calculated FAO and other international standard method authorized under the PENMAN-MONTEITH Method was used, and the low temperature onset and frequency of the Gumbel probability density function was used. As a result, the variation of day evaporation for 38 years were showed to respectively width of variation from maximum $9mm\;day^{-1}$ to minimum $0.5mm\;day^{-1}$. The frequency of reappearance to first emergence day that lasts more than 5 days with temperature $5^{\circ}C$ over is 3 April a 50-year frequency, 10 April a 25-year frequency, 20 April a 10-year frequency, 28 April a 5-year frequency, 8 May a 2-year frequency. Psychrotrophic crop to growth temperature more than $5^{\circ}C$ can be secured to stable production with planting after May 8, prior to planting for normal growth can be seen that the risk of growth.

• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.556-561
• /
• 1997

Vibrio cholerae non-O1 FM-3 was isolated from sea water, and it showed the same bacteriological characteristics as Vibrio cholerae non-O1 ATCC 25872. V. cholerae non-O1 FM-3 presented the highest hemolytic activity at stationary phase of its growth. The hemolytic activity was decreased in accordance with increasing of pretense activity of its cultural supernatant. The characteristics of the hemolysin produced by V. cholerae non-O1 FM-3 were investigated after partial purification with a Sephadex G-100 chromatography. The hemolytic activity of purified protein was stable at $4^{\circ}C$ while it was completely lost by heating at $60^{\circ}C$ for 30 min. The activity of hemolysin was increased by addition of divalent cations such as $Ca^{2+},\;Mg^{2+},\;and\;Mn^{2+}$ while it was inhibited by additions of $Zn^{2+}$. When the hemolysin was incubated with suspensions of erythrocytes at $4^{\circ}C$ and $37^{\circ}C$, respectively, hemolysis was not observed at $4^{\circ}C$ but at $37^{\circ}C$. It means that hemolysis by purified hemolysin was temperature-dependent while its binding step of hemolysin to cell membrane was temperature-independent.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.111-116
• /
• 1998

The simple solid electrolyte carbon dioxide sensor with heaters were fabricated by using Li ionic conductor. Two Au electrodes were used for the reference and sensing electrode respectively. Two types of gas sensors, type ( I ) and type (II), were fabricated. Type ( I ) sensor was fabricated by the method of melting and crystallizing alkali metal carbonate at the temperature of $420{\sim}500^{\circ}C$. The sensing membrane of type (II) sensor was formed by the printing method on sensing electrode after metal carbonate was mixed with binder. The response characteristics of sensors fabricated for the carbon dioxide were investigated for a range of $CO_{2}$ concentration from 950 ppm to 9,950 ppm at operating temperature $420^{\circ}C$. Type ( I ) sensor and type (II) sensor showed the sensitivity of 62 mV/decade and 65 mV/decade respectively. The emf/decade of type (II) sensor tested at $420^{\circ}C$ almost followed the theoretical value of Nernst's equation and showed stable response characteristics with the fast response time of $15{\sim}20$ sec. Also type (II) sensor showed excellent stability and reproduction properties for 60 days.

• KSBB Journal
• /
• v.19 no.4
• /
• pp.301-307
• /
• 2004

The characteristics of the a-amylase of Aspergillus coreanus NR 15-1 isolated from traditional Korean Nuruk have been carried out. The a-amylase of A. coreanus NR 15-1 was purified by ammonium sulfate precipitation followed by column chromatographies on CM-cellulose, DEAE-cellulose, Sephadex G-100 gel filtration and hydroxyapatite. The a-amylase was purified 78-fold with a yield of 8.7%. The molecular weight of the a-amylase was estimated to be 49 kDa by Sephadex G-100 gel filtration and 51 kDa by SDS-polyacrylamide gel eletrophoresis. These experimental results suggested that the purified enzyme might be monomer. The enzyme was stable between pH 4 and 11. The optimum pH was 5.0. The optimum temperature for enzyme was 45$^{\circ}C$ and the enzyme was stable up to 50$^{\circ}C$. The enzyme was significantly inhibited by 1 mM N-bromosuccinimide. These results suggested that tryptophan residue was involved in the active site of a-amylase. The enzyme was identified as a-amylase because the reaction products of soluble starch hydrolyzed by the purified enzyme was oligosaccharide by thin layer chromatography.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.88-93
• /
• 2001

The thermal behavior and the crystallographic characteristics of an epitaxial $C49-TiSi_2$ island formed in a Si (001) substrate by $N_2$, treatment were investigated by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). It was found from the analyzed results that the epitaxial $C49-TiSi_2$ was thermally stable even at high temperature of $1000^{\circ}C$ therefore did not transform into the C54-stable phase and did not deform morphologically. HRTEM results clearly showed that the epitaxial $TiSi_2$ phase and Si have the orientation relationship of (060)[001]$TiSi_2$//(002)[110]Si, and the lattice strain energy at the interface was mostly relaxed by the formation of misfit dislocations. Furthermore, the mechanism on the formation of the epitaxial $_C49-TiSi2$ in Si and stacking faults lying on the (020) plane of the C49 Phase were discussed through the analysis of the HRTEM image and the atomic modeling.