• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.227-234
• /
• 2018

In this work, we have prepared the reactive media with the pyrophyllite based using ceramic extrusion process. The characteristics of pyrophyllite were analyzed using XRD, XRF, DSC-TGA and Zeta-potential analysis. The study of pyrophyllite based ceramic reactive media were conducted under various roasting temperature (500 to $1,300^{\circ}C$) conditions. With increasing the roasting temperature, strength was increased but BET surface area was decreased. Thermally treated pyrophyllite were analyzed by means of weight loss and structural changes as detected by using XRD, DSC-TGA and SEM analysis. Pyrophyllite primarily transforms to pyrophyllite dehydroxylate after roasting at $1,000^{\circ}C$. Pyrophyllite dehydroxylate transforms to mullite and cristobalite at $1,300^{\circ}C$. This study demonstrates that pyrophyllite could be used as a reactive media for ceramic support layers from Permeable Reactive Barriers.

• Applied Science and Convergence Technology
• /
• v.26 no.5
• /
• pp.118-128
• /
• 2017

The scope of this work is to determine and compare the effect of electron temperature ($T_e$) and number density ($N_e$) on the yield rate and concentration of reactive chemical species ($^{\bullet}OH$, $H_2O_2$ and $O_3$) in an argon, air and oxygen injected negative DC (0-4 kV) capillary discharge with water flow(0.1 L/min). The discharge was created between tungsten pin-to pin electrodes (${\Phi}=0.5mm$) separated by a variable distance (1-2 mm) in a quartz capillary tube (2 mm inner diameter, 4 mm outer diameter), with various gas injection rates (100-800 sccm). Optical emission spectroscopy (OES) of the hydrogen Balmer lines was carried out to investigate the line shapes and intensities as functions of the discharge parameters such as the type of gas, gas injection rate and inter electrode gap distances. The intensity ratio method was used to calculate $T_e$ and Stark broadening of Balmer ${\beta}$ lines was adopted to determine $N_e$. The effects of $T_e$ and $N_e$ on the reactive chemical species formation were evaluated and presented. The enhancement in yield rate of reactive chemical species was revealed at the higher electron temperature, higher gas injection rates, higher discharge power and larger inter-electrode gap. The discharge with oxygen injection was the most effective one for increasing the reactive chemical species concentration. The formation of reactive chemical species was shown more directly related to $T_e$ than $N_e$ in a flowing water gas injected negative DC capillary discharge.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.31-38
• /
• 2021

In this study, a nonionic reactive emulsifier with aromatic and acryl group was synthesized by using polyoxyethylene(10) dodecylphenyl ether with 3-butenoic acid. The synthesized nonionic reactive emulsifier was confirmed by ¹H-NMR and FT-IR. In addition, the reactive emulsifier synthesized in the preparation of aqueous acrylic adhesives base emulsion was used and the properties of the solid content, conversion, particle size distribution, peel strength and high temperature holding force were compared to those of nonionic emulsifiers without aromatic group. The particle size was distributed from 370 nm to 698 nm, and the peel strength were measured in the range of 1.507~1.802 kg_f. The high temperature holding force of prepared adhesives base emulsion were measured in the range of 0.50~2.00 mm. Especially, in the result of synthesized nonionic reactive emulsifier with aromatic group, it was confirmed that high temperature holding force results were the most excellent than the case of using other nonionic reactive emulsifiers, and it can be useful for water-based acryl pressure sensitive adhesive.

• Journal of Korean Society on Water Environment
• /
• v.30 no.2
• /
• pp.175-183
• /
• 2014

The influence of temperature on the treatment efficiency of chlorinated organic substances contained in groundwater by permeable reactive barrier which is composed of $Fe^{\circ}$ has been investigated by constructing the Pourbaix diagrams for Fe-$H_2O$ system at different temperatures based on thermodynamic estimation. In aerobic condition, the equilibrium potentials for $Fe^{\circ}/Fe^{2+}$ and $Fe^{2+}/Fe^{3+}$ were observed to increase, therefore, the dechlorination reaction for organic pollutants by $Fe^{\circ}$ was considered to decline with temperature due to the diminished oxidation of reactive barrier. The result for the variations of the ionization fraction of $Fe^{2+}$ and $Fe^{3+}$ ion in the pH range of 0 ~ 2.5 obtained by employing Visual MINTEQ program showed that the ionization fraction of $Fe^{2+}$ increased with pH, however, that of $Fe^{3+}$ decreased symmetrically and the extent of the variation of ionization fraction for both ions was raised as temperature rises. The equilibrium pH for $Fe^{3+}/Fe(OH)_3$ was examined to decrease with temperature so that the treatment efficiency of chlorinated organic substance was expected to decrease with temperature due to the enhanced formation of passivating film in aerobic condition. The change of the reactivity of a specific chemical species with temperature was defined quantitatively based on the area of its stable region in Pourbaix diagram and depending on this the reactivity of $Fe^{3+}$ was shown to decrease with temperature, however, that of $Fe(OH)_3$ was decreased monotonously as temperature is raised for $Fe^{3+}/Fe(OH)_3$ equilibrium system. In anaerobic condition, the equilibrium potential for $Fe^{\circ}/Fe^{2+}$ was observed to rise and the equilibrium pH for $Fe^{2+}/Fe(OH)_2$ were examined to decrease as temperature increases, therefore, similar to that for aerobic condition the efficiency of the dechlorination reaction for organic substances was considered to be diminished when temperature rises because of the reduced oxidation of $Fe^{\circ}$ and increased formation of $Fe(OH)_2$ passivating film.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.102.1-102.1
• /
• 2010

고효율 멀티정션박막태양전지의 바텀셀 적용을 목적으로, 반응성CVD(Reactive thermal CVD)기술을 이용, $Si_2H_6+GeF_4$를 원료가스로, 이들이 가진 산화환원반응을 이용하여 400도 이하의 저온에서 Ge 및 Si 기판에 Ge을 에피성장 시켰다. Ge 기판위의 호모에피막의 경우, $2.5{\AA}/sec$의 성장속도와 99%의 Ge조성을 보였고, RHEED 및 HR-XRD를 통한 결정성 평가 결과, 고품질의 Ge 에피막의 성장이 확인되었다. 동일한 성장조건을 Si기판에 헤테로에피성장 시켰을 경우, 4% 격자불일치에 의해 막품질이 저하되는 것을 확인하였다. 이를 개선하기 위하여 저온에서 제작한 버퍼층에 대한 논의를 하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.361-364
• /
• 2000

Antimony doped tin oxide (ATO) thin films were deposited at room temperature by reactive ion-beam sputter deposition (IBSD) technique in oxidizing atmosphere utilizing Sb and Sn metal targets. Effect of Sb doping concentration, film thickness and heat treatment on electrical and optical properties was investigated. The thickness of as-deposited films was controlled approximately to 1500 $\AA$ or 2000$\AA$, and Sb concentration to 10.8 and 14.9 wt%, as determined by SEM and XPS analyses. Heat treatment was performed at the temperature from 40$0^{\circ}C$ to 80$0^{\circ}C$ in flowing $O_2$or forming gas. The resulting ATO films showed widely changing electrical resistivity and optical transmittance values in the visible spectrum depending on the composition, thickness and firing condition.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.577-581
• /
• 2004

Comamonas sp. AEBL-85 was isolated from microbial granules in an activated sludge process of long-term operated for the treatment of reactive azo dye, and characterized its capability to decolorize Reactive Black 5. The effects of adding carbon source and nitrogen source on the extent of decol-orization were analyzed to develop an optimal medium. The optimum initial pH and temperature wire 6.0 and 35$^{\circ}C$, respectively. Reactive Black 5 of 50 mg/l was readily decolorized up to 95% within 40 hr by Comamonas sp. AEBL-85.

• Textile Coloration and Finishing
• /
• v.24 no.2
• /
• pp.97-105
• /
• 2012

Compared with conventional adsorption-based coloration, the photoreactions of dyes such as photo-copolymerization and photo-crosslinking under UV irradiation can be employed for the coloration of textiles, which can be carried out without salt addition at room temperature. C.I. Reactive Black 5, a homo-bifunctional reactive dye containing two sulfatoethylsulfone groups, is used as a photo-reactive dye for wool fibers. Upon UV irradiation, the photo-reactive dye was grafted onto wool fabrics without photoinitiators. Since the disulfide bonds in the cystine residues of wool can be easily photodecomposed to active thiyl radicals which initiate the polymerization, the dye can be polymerized to an oligomeric dye of a degree of polymerization of 12 or more. The grafted fabrics reached a grafting yield of 2.3% o.w.f. and a color yield (K/S) of 18.2 by the photografting of an aqueous dye concentration of 9% using a UV energy of 25J/$cm^2$. Furthermore, the photochemically dyed wool fabric showed higher colorfastness properties to light, laundering and rubbing comparable to conventional reactive dyeing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.98-101
• /
• 2003

The purpose of this research is to investigate the hypersonic reactive flow around hyperbolic shaped ballistic launcher, A numerical study was carried out to compare with the experimental results of hyperbolic shaped model, which were tested in a free piston shock tunnel, T3 in ANU. Freestream condition was 98% $N_2$, 2% $O_2$, and total enthalpy was 8MJ/kg. Also this paper used 2-temperature and 1-temperature model to show the difference of them.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.280-280
• /
• 2012

We examined ammonia diffusion on the surface of amorphous ice film through the measurement of decreasing residual quantity of $NH_3$ molecules compared to $H_2O$. The populations of $NH_3$ molecules on the surface of amorphous ice were monitored by using the techniques of temperature programmed reactive ion scattering (TPRIS) method. The ratio of intensity between ammonia and water was examined as a function of time at controlled temperature. When ammonia molecules were externally added onto an ice film at a temperature of 80 K, ammonia coverage with regard to ice was 0.12-0.16 ML. The intensity of ammonia molecules on the surface of ice decreased as time increased and the extent of decreased intensity of ammonia increased as controlled temperature increased. Moreover, energy barrier was estimated to be $51kJmol^{-1}$ on amorphous ice film. The results of the experiment indicate that ammonia molecules have a property of vertical diffusion into amorphous ice and the energy barrier of ammonia diffusion into bulk of ice is higher than that of hydrogen bonding.