• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.125-132
• /
• 2002

PMSMS (permanent magnet synchronous motors) are widely used in industrial applications and home appliances because of their high torque to inertia ratio, superior power density, and high efficiency. For high performance control, accurate informations about the rotor position is essential. Sensorless algorithms have lately been studied extensively due to the high cost of position sensors and their low reliability in harsh environments. A novel position sensorless speed control for PMSMs uses indirect flux estimation and is presented in this paper. Rotor position and angular velocity are estimated by the proposed indirect flux estimation. Linkage flux and magnetic field flux are calculated by the voltage equations and the measured phase current without any integration. Instead of linkage flux calculation with integral operation, indirect flux and differential magnetic field are used for the estimation of rotor position. A proper rejection technique fur current noise effect in the calculation of differential linkage flux is introduced. The proposed indirect flux detecting method is free from the integral rounding error and linkage flux drift problem, because differential linkage flux can be calculated without any integral operation. Furthermore, electrical parameters of the PMSM can be measured by the proposed TCM (time compression method) for soft starting and precise estimation of rotor position. The position estimator uses accurate electrical parameters that are obtained from the proposed TCM at starting strategy. In the operating region, a proper compensation method fur temperature effect can compensate fir the estimation error from the variation of electrical parameters. The proposed novel position sensorless speed control scheme is verified by the experimental results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.850-853
• /
• 2011

우주발사체에 사용하는 극저온 밸브용 위치지시기는 높은 신뢰성과 정확성을 가져야 한다. 극저온 환경에 노출되는 만큼 습기나 외부오염 등 환경 요인에 영향을 받지 않고 밸브의 상태를 측정하여야 한다. 이러한 요구조건을 만족할 수 있도록 영구자석과 리드스위치를 활용한 위치지시기를 개발하였다. 영구자석과 리드스위치의 특성을 분석하고 극저온 환경에 적용할 수 있는 부품을 선정하였다. 그리고 밸브 개폐 정보를 정확하게 측정할 수 있도록 부품의 형상과 위치를 고려하였다. 최종적으로 밸브 시제품에 적용하여 시험을 통해 설계 변수의 타당성을 검증하였다.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.653-658
• /
• 2022

본 논문에서는 온도 변화로 인한 영구자석 쇄교 자속 변화를 고려한 PMSM 드라이브의 MTPA(Maximum Torque per Ampere) 제어 알고리즘을 제시한다. 영구자석 쇄교 자속은 고정자 쇄교 관측기를 통해 실시간으로 추정되고, 추정된 영구자석 쇄교 자속으로부터 토크 오차 보정 계수가 계산된다. 2차원 MTPA look-up table(LUT)은 토크 오차를 보상하기 위해 영구자석 쇄교 자속 변화를 반영하는 MTPA 전류 궤적을 달성하기 위해 개발되었다. 제안된 PMSM의 MTPA 제어 알고리즘은 시뮬레이션을 통해 검증된다.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.44-50
• /
• 1998

This paper describes the simulation of the levitation force between permanent magnet and high Tc(critical temperature) superconductor(HTSC). Levitation force is evaluated numerically on the basis of the magnetic vector potential method and the critical state model. The superconductor is approximated to 2-D slab model. By performing computations, the following characteristics have been investigated: the process of the generation of hysteresis, the various hysteretic behaviors. The characteristics of hysteresis are important for the application to magnetic bearing, for the damping and the nonlinear stiffness is related to hysteresis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.51-53
• /
• 2001

Permanent Magnet DC Motors are widely used in Automotive parts because they have cheap price, simple structure and high torque-speed ratio. But the motor in automotive parts is required high quality, complex function and lower price than before. This paper deals with design of controller for safety function that body trap on the automotive window. The algorithm of controller can adapt variety conditions with temperature, electrical, driving, etc.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.144-149
• /
• 2013

This work deals with the optimal design of a coreless PMLSM (Permanent Magnet Linear Synchronous Motor) with consideration of rising winding temperature. The temperature distribution caused by copper loss in the coreless PMLSM was analyzed using a FEM (Finite Element Method). The thrust and current density where the winding temperature reaches the allowable temperature were calculated. The optimal model provides maximum thrust per unit weight.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.20-24
• /
• 1999

The study of HTS(High Temperature Superconducting) bulk in magnetic levitation system requires the calculation of currents distribution in HTS bulk is very important to determine this forces. We have made computer program to find this current distribution and levitation force. J-E relation in HTS bulk is extremely nonlinear, so iteration method must be used to determine the current distribution. We developed the method to determine the current distribution in the unifrom-field model and, using this method, calculated the levitation force in permanent-magnet-levitation model.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.52-59
• /
• 1997

An experimental study is presented for the characteristics of the high temperature superconductor as an application of the repulsive type magnetic bearing. A ring shaped YBCO type superconductor and Neodium permanent magnets are employed for the experiment. For the case of field cooling, superconductor shows strong repulsive force, which is due to the Meissner effect, as the gap between the superconductor and the magnet gets closer. The repulsive force variation with respect to the gap change shows hysterisis characteristics. The area of the loop of the hysterisis curve represents the dissipation of energy, which reveals that the magnetic bearing with superconductor has large damping. The effect of the initial gap and the magnetic flux density on the repulsive force is analyzed experimentally and the static stiffness variation is calculated from the measured repulsive force variation. The relative sliding velocity between the superconductor and the magnet has little effect on the repulsive force which is quite different from the usual sliding element bearing. As the initial gap for the field cooling becomes larger, the maximum repulsive force at the minimum gap increases and approaches to the value for the case of zero field cooling.

• Journal of Magnetics
• /
• 제4권3호
• /
• pp.98-101
• /
• 1999

In this work we htave constructed an under water sonar transducer using Terfenol-D rod employing open magnetic circuit. Normally Sonar transducer using Terfenol-D was designed under closed magnetic flux return path, and permanent magnet for dc bias marnetic field, but high magnetic field should be applied to the transducer coil for high sound power and it brings temperature increase inside of the transducer. To improve this heat dissipation problem, we have designed an open magnetic circuit type transducer and we can get 200 dB (re. 1 Pa @ 1m) sound power for the input power of 650 VA.

• 신재생에너지
• /
• 제6권4호
• /
• pp.41-49
• /
• 2010

Over the last decade, wind turbine industry has rapidly increased around world. These days many parts of the wind generators are induction generator. But it has some problems such as gearbox failure, rotor excitation and maintenance. Thus many manufacturers are considered permanent magnet synchronous generator named PMSG and direct drive. PMSG uses NdFeB magnet has many the advantage compare with induction generator. In this study, 3MW class outer rotor type PMSG for wind turbine is proposed. The generator features 2.6m stator outer radius, 1200mm stator length, 81 pole pairs, 14 rated rpm, 42kN/$m^2$ shear force density and 94.2% efficiency. Design and analysis generator using FEM program. Then calculate and derivate no load voltage, losses, conductor temperature. To reduce total harmonic distortion and cogging torque, the stator is applied the stator skewing. And to evaluate the designed generator, compare with other generators by active mass per rating torque and torque density.