• Structural Engineering and Mechanics
• /
• v.65 no.4
• /
• pp.491-504
• /
• 2018

Because of sandwich structures with low weight and high stiffness have much usage in various industries such as civil and aerospace engineering, in this article, buckling and free vibration analyses of coupled micro composite sandwich plates are investigated based on sinusoidal shear deformation (SSDT) and most general strain gradient theories (MGSGT). It is assumed that the sandwich structure rested on an orthotropic elastic foundation and make of four composite face sheets with temperature-dependent material properties that they reinforced by carbon and boron nitride nanotubes and two flexible transversely orthotropic cores. Mathematical formulation is presented using Hamilton's principle and governing equations of motions are derived based on energy approach and applying variation method for simply supported edges under electro-magneto-thermo-mechanical, axial buckling and pre-stresses loadings. In order to predict the effects of various parameters such as material length scale parameter, length to width ratio, length to thickness ratio, thickness of face sheets to core thickness ratio, nanotubes volume fraction, pre-stress load and orthotropic elastic medium on the natural frequencies and critical buckling load of double-bonded micro composite sandwich plates. It is found that orthotropic elastic medium has a special role on the system stability and increasing Winkler and Pasternak constants lead to enhance the natural frequency and critical buckling load of micro plates, while decrease natural frequency and critical buckling load with increasing temperature changes. Also, it is showed that pre-stresses due to help the axial buckling load causes that delay the buckling phenomenon. Moreover, it is concluded that the sandwich structures with orthotropic cores have high stiffness, but because they are not economical, thus it is necessary the sandwich plates reinforce by carbon or boron nitride nanotubes specially, because these nanotubes have important thermal and mechanical properties in comparison of the other reinforcement.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.694-703
• /
• 2012

To understand the characteristics of sedimentary and benthic environments in habitats of naturally-occurring intertidal benthic macroalgae, various geochemical parameters of sediment (grain size, ignition loss [IL], chemical oxygen demand [COD], and acid volatile sulfur [AVS]) and pore water (temperature, salinity, pH, and nutrients) were measured in the southern intertidal zone of Hampyeong Bay at two month intervals from April to October 2009. Ecological characteristics including the distribution and biomass of benthic macroalgae were also investigated. Benthic macroalgae were distributed below 4 to 5 m depth from mean sea level near the lower portion of the intertidal zone where air exposure time is relatively short. The distribution area and biomass of benthic macroalgae gradually decreased during the study period. The surface sediments in the benthic algal region were mainly composed of finer sediments, such as slightly gravelly mud and mud. The temperature, salinity, pH, and nutrient concentrations (except dissolved inorganic nitrogen) in pore water did not differ in regions with and without benthic macroalgae, whereas the mean grain size and the concentrations of IL, COD, and AVS in sediments were much higher in regions harboring benthic macroalgae. The correlation between mean grain size and IL in sediments displayed two distinct gradients and the slope was much steeper in regions harboring benthic macroalgae, indicating that the content of organic matter in benthic algal region is not solely dependent on mean grain size. Our results indicate that the benthic macroalgae in the southern intertidal zone of Hampyeong Bay play an important role in the accumulation of organic matter in sediment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.11
• /
• pp.1105-1114
• /
• 2010

Ice shapes accumulated on the aircraft surfaces are categorized into rime and glaze ice, which are highly dependent on various parameters such as ambient temperature, liquid water contents (LWC), mean volumetric droplet diameter and freestream velocity. In this study, quantitative analyses on the ice accretion have been attempted in a systematical manner and the key findings are as follows. First, the increase of freestream velocity can cause tremendous change in the ice accumulation such as the growth of ice accretion area, ice heading direction and maximum thickness of ice horn. Second, LWC is found to be linearly proportional to the ice accretion area. Third, the effects of ambient temperature on incoming water mass seem to be relatively small in comparison with LWC and freestream velocity. Finally, it was shown that MVD has only a little influence on ice shapes. However, it may increase the ice accretion area by increasing the droplet impacting range.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.185-190
• /
• 1992

Near-IR spectra for $ν_{\alpha}$+ Amide Ⅱ combination band of thioamides, and very dilute thioamide-DMSO solution in CCl4 were recorded in the temperature range of $5^{\circ}C$ to $55^{\circ}C$. This combination band was resolved by the computer program into two Lorentzian-Gaussian product function which have been identified with monomeric thioamide and thioamide-DMSO 1 : 1 complex. Equilibrium constants and thermodynamic parameters for the thioamide-DMSO hydrogen bonding were elucidated by the analysis of conce ntration and temperature dependent spectra. The hydrogen bonding strength between thioacetamide (TA) and DMSO in $CCl_4$ is stronger than that between thiopropionamide (TPA) and DMSO in CCl4. The ${\Delta}H^{\circ}$ for the TA-DMSO and TPA-DMSO 1 : 1 complex in CCl4 were -15.3 kJ${\cdot}$$mol^{-1}$ and -14.2 kj${\cdot}$$mol^{-1}$, respectively.

• Korean Journal of Materials Research
• /
• v.19 no.5
• /
• pp.245-252
• /
• 2009

Changes in the surface morphology and light scattering of textured Al doped ZnO thin films on glass substrates prepared by rf magnetron sputtering were investigated. As-deposited ZnO:Al films show a high transmittance of above 80% in the visible range and a low electrical resistivity of $4.5{\times}10^{-4}{\Omega}{\cdot}cm$. The surface morphology of textured ZnO:Al films are closely dependent on the deposition parameters of heater temperature, working pressure, and etching time in the etching process. The optimized surface morphology with a crater shape is obtained at a heater temperature of $350^{\circ}C$, working pressure of 0.5 mtorr, and etching time of 45 seconds. The optical properties of light transmittance, haze, and angular distribution function (ADF) are significantly affected by the resulting surface morphologies of textured films. The film surfaces, having uniformly size-distributed craters, represent good light scattering properties of high haze and ADF values. Compared with commercial Asahi U ($SnO_2$:F) substrates, the suitability of textured ZnO:Al films as front electrode material for amorphous silicon thin film solar cells is also estimated with respect to electrical and optical properties.

• Hwankyungkyoyuk
• /
• v.22 no.1
• /
• pp.12-30
• /
• 2009

The relationship between marine environmental improvement and environmental perception of the inhabitants was investigated. For this purpose, the seawater and bottom materials were analysed. Apart from this, the questionnaire surveys were also conducted around the Sun-so coastal area. In order to examine the improvement in the marine environment, 12 monitoring sites, which are located around Sun-so coast and can be divided into two parts such as inland (GW1-GW6) and outland (GW7-GW12) sea, were chosen. All the collected samples were analyzed to find out the quality of seawater (temperature, pH, salinity, dissolved oxygen: DO, chemical oxygen demand: COD and suspend solid: SS), nutrients (total nitrogen: TN and phosphate: $PO_4-P$) and bottom materials (COD, volatile solids: VS) as per the standard analytical procedures. In addition, the questionnaire mainly focused on the following three factors: 1) social economy, 2) dependent environmental awareness and 3) independent environmental awareness related with the environmental education. The monitoring studies indicated that the marine environment of the Sun-so coast showed various trends for analyzing parameter. No significant temporal changes in temperature, pH and salinity were observed. However, the other parameters showed decreasing (COD, SS, TN, $PO_4-P$ and VS) and increasing (DO) trends according to the quality of seawater and bottom materials. The questionnaire survey clearly showed that most of the residents in Sun-so recognized the improvement of marine environment as compared with the situation experienced in the past. The dredging project which is closely related with economic and living conditions of the local residents led to alter the environmental perceptions and attitudes. The survey also indicated that the inhabitants perceived the necessity of the environmental education (87% of respondents) and preferred regular schooling (55% of respondents) as effective and practical education methods.

• International Journal of Highway Engineering
• /
• v.2 no.2
• /
• pp.129-138
• /
• 2000

This study presents the mechanical characteristics, such as the permanent deformation and the crack, of the large stone asphalt mixtures. The large stone mixture was studied by Kandhal at NCAT(National Center for Asphalt Technology) in 1989. Japan and Arabian countries adopted the large stone mixture for the pavement construction. The experience and the study results showed that the interlocking of the aggregate system of the large stone mixtures is stable and less dependent on the binder characteristics in high temperature. These properties are known as the rutting resistant parameters. However, the mechanical test results should be supported to prove the benefits of the large stone mixtures. The creep test, resilient modulus tests on three different temperature, wheel tracking test and ravelling tests were conducted to evaluate the performance of the large stone mixtures in this study. The test results were compared with the conventional mixtures and modified asphalt concrete mixtures. The large stone mixtures showed better rutting resistance performance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.5
• /
• pp.372-378
• /
• 2007

GHX (Geothermal Heat Exchanger) design which determines the performance and initial cost is the most important factor in ground source heat pump system. Performance of GHX is strongly dependent on the thermal resistance of soil, grout and pipe. In general, GHX design is based on the static simulation program. In this study, dynamic simulation has been peformed to analyze the variation of system performance for various GHX parameters. Line-source theory has been applied to calculate the variation of ground temperature. The averaged weather data measured during a 10-year period $(1991\sim2000)$ in Seoul is used to calculate cooling and heating loads of a building with a floor area of $100m^2$. The simulation results indicate that thermal properties of borehole play significant effect on the overall performance. Change of grout thermal conductivity from 0.4 to $3.0W/(m^{\circ}C)$ increases COP of heating by 9.4% and cooling by 17%. Change of soil thermal conductivity from 1.5 to $4.0W/(m^{\circ}C)$ increases COP of heating by 13.3% and cooling by 4.4%. Change of GHX(length from 100 to 200 m increases COP of heating by 10.6% and cooling by 10.2%. To study long term performance, dynamic simulation has been conducted for a 20-year period and the result showed that soil temperature decreases by $1^{\circ}C$, heating COP decreases by 2.7% and cooling COP decreases by 1.4%.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.11
• /
• pp.1552-1558
• /
• 2021

The diverse microbial communities in kimchi are dependent on fermentation period and temperature. Here, we investigated the effect of enterotoxigenic Escherichia coli (ETEC) during the fermentation of kimchi at two temperatures using high-throughput sequencing. There were no differences in pH between the control group, samples not inoculated with ETEC, and the ETEC group, samples inoculated with ETEC MFDS 1009477. The pH of the two groups, which were fermented at 10 and 25℃, decreased rapidly at the beginning of fermentation and then reached pH 3.96 and pH 3.62. In both groups, the genera Lactobacillus, Leuconostoc, and Weissella were predominant. Our result suggests that microbial communities during kimchi fermentation may be affected by the fermentation parameters, such as temperature and period, and not enterotoxigenic E. coli (ETEC).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.738-749
• /
• 2016

To understand the characteristics of the spatio-temporal distribution of phytoplankton after barrage construction in the Nakdong River Estuary, this study investigated relevant environmental parameters and phytoplankton status based on bi-monthly samples collected from the Nakdong River Estuary itself from February 2013 to December 2015. Environmental parameters did not differ significantly across these years but did vary between zones and seasons. The results suggested that the upper zone was dominated by fresh-water diatoms, green algae, and blue-green algae, whereas the lower zone was mostly dominated by dinoflagellates. The presence of Stephanodiscus spp., Asterionellopsis formosa, and Microcystis spp. in the upper zone was related to the inflow of freshwater discharge by artificial control of dyke gates. The dominant phytoplankton species in this zone were dependent on temperature, wind speed, DIP, and DIN, while those in the lower zone were mostly dependent on nutrients and wind speed. In addition, at the lower zone, there were negative correlations between Prorocentrum donghaiense, DIN, and wind speed, with its abundance being higher during the summer than other seasons. Analysis of temporal variations did not indicate any significant differences in the upper zone but did reveal variations among seasons at the lower zone. Except in 2014, the lower zone could be divided into periods dominated by diatoms (October-April) and dinoflagellates (June-August). These results suggest that the characteristics of the phytoplankton community were influenced by changes in the inflow of freshwater species and nutrients given the difference in the range affected by freshwater discharge.