• 열처리공학회지
• /
• 제33권6호
• /
• pp.296-302
• /
• 2020

Magnesium alloys have been rapidly attracting as lightweight structural material in various industry fields because of having high specific strength and low density. It is well known that the crystallographic texture plays an important role in improvement of poor room temperature ductility of magnesium alloys. In this study, high-temperature plane strain compression deformation was conducted on extruded AZ80 magnesium alloy at 723K by varying the strain rates ranging from 5.0×10^-3s^-1 to 5.0×10^-2s^-1 in order to investigate the behaviors of texture formation. It was found that texture formation behaviors in three kinds of specimens were affected by continuous and discontiuous deformation mechanism.

• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1219-1226
• /
• 1995

Creep behaviors of Cr3C2 composites containing 90 wt% Cr3C2 and 10 wt% Ni were studied at high temperature. Compression tests at 100$0^{\circ}C$ and bending tests at 100$0^{\circ}C$ and 105$0^{\circ}C$ were done in argon environment. In all test conditions primary and steady-state creep behaviors were observed. Stress exponent and activatiion energy were determined from the experimental data. By microstructural analysis of Cr3C2 composites after creep test, the separate agglomerations of Ni phase were observed. Numerical analysis was also studied to analyze bending creep behaviors of Cr3C2 by assumming different tensile and compressive creep behavior in a bending sample. From the analysis, it was found that the stress state at the compressive region as applied stress increased. The observed creep rates were compared with the predicted creep rates by estimating power-law creep parameters from bending test data.

• 한국지반신소재학회논문집
• /
• 제5권3호
• /
• pp.31-36
• /
• 2006

본 연구에서는 보호, 여과, 차수기능을 갖는 부직포 지오텍스타일과 지오멤브레인의 응력완화거동을 각각 고찰하였다. "두 가지 지오신세틱스 제품의 응력완화거동을 해석하는데 "전이현상이론"이 적용되었다. 이들 지오신세틱스 제품의 응력완화거동에서 초기 및 후기 완화시간은 구성방정식으로부터 구하였다. 이들 지오신세틱스 제품의 초기완화거동은 부가변형률에 대한 의존성이 있으며, 특히 온도가 증가 할수록 증가하였다. 끝으로, 이들 지오신세틱스 제품의 초기 및 후기 완화시간은 부가변형률 및 온도가 커질수록 짧아졌으며, 완화시간 감소는 지오멤브레인보다 부직포 지오텍스타일의 경우가 더 큼을 알 수 있었다.

• 한국지반신소재학회논문집
• /
• 제3권4호
• /
• pp.21-27
• /
• 2004

보호, 여과 및 배수, 차수기능을 가진 부직포 지오텍스타일과 지오멤브레인의 응력완화거동을 각각 분석하였다. '전이현상 평형이론'이 이들 토목합성재료의 응력완화거동 해석에 적용되었다. 응력완화거동의 초기 및 후기완화시간을 구성방정식으로 부터 구하였다. 초기완화거동은 부가변형률에 좌우되며, 온도에 따라 빨라짐을 알 수 있었다. 끝으로, 이들 토목합성재료의 초기 및 후기완화시간은 부가변형률 및 온도에 따라 짧아졌다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.218-219
• /
• 2017

In order to examine the possibility of practical at low-temperature environment curable cement mortar with chloride and nitrite as cold resistance admixture for rebar corrosion prevention. As a result, chloride was used using nitrite complex in low temperature environment and corrosion performance of rebar was improved and mortar strength was promoted. The ratio of nitrite than chloride applied more than twice, corrosion of the reinforcing bars will not occur even in low temperature environment, cement hydration reaction will be promoted and mortar will prevent freezing damage.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.91-99
• /
• 1997

To stabilize the energy price, the more storage facilities of energy are required and among the storage methods of LPG and LNG, the method of storage at low temperature under normal confining pressure is considered. It is needed to understand the mechanical and thermal characteristics of rock under temperature variation so that the behaviors of rock can be predicted. In this paper, the variation of the rock charateristics of the Hwangdeung granite and the Boryung sandstone is studied at low temperature. The mechanical characteristics of rock under low temperatures are that as temperature decreased, unaxial compression strength and Young's modulus increased for Hwangdeung granite; strength and Young's modulus in wet condition were greater than those in dry condition. In the case of Boryung sandstone, as temperature decreases unaxial compression strength and Young's modulus increase but decrease below -10$0^{\circ}C$ in dry condition and below -16$0^{\circ}C$ in wet condtion. The mechanical characteristics of rock after cooling to previous temperature and thawing are that uniaxial compression strength and Young's modulus decrease as temperature decreases. Uniaxial compression strength and Young's modulus in wet conditon decrease more than those in dry condition. Brazilian tension strength decreases as temperature decreases.

• 조명전기설비학회논문지
• /
• 제27권12호
• /
• pp.16-27
• /
• 2013

This study describes the difference of lighting directing techniques of between asian and westerner in the residential space, and presents the LED lighting environment according to the residents' behaviors. This study was conducted with Koreans, European and North Americans, and the space range was limited to the living room where the various activities occur. The data of the desired LED lighting environment is drawn through lighting technique, illumination color temperature and illuminance variation of LED in living room, and the detailed study results are as follows ; First, the lighting in living space should be made with considering the various behaviors because the expected level according to consideration or not of behavior makes much difference. Second, the comfortably feeling LED lighting environments that are lighting technique, illumination color temperature and illuminance variation, are different between Koreans and North Americans, but Koreans and European feel comfortable under the similar LED lighting environments. Third, the data for the comfortable LED lighting environments is established according to the various residents' behaviors, which are watching TV, reading, studying, relaxing, chatting, entertaining guests. And then, the established LED lighting environments are analyzed with characteristic of behavior and classified according to lighting technique, illumination color temperature and illuminance variation for understanding their characteristic Few studies have been conducted to find out difference of the comfortably feeling LED lighting environment between asians and westerners. Therefore, in this study, it has a great significance to present the difference of the LED lighting environments that asians and westerners feel comfortable in living space, and to draw the characteristic of the expected lighting environment according to residents' behaviors.

• Carbon letters
• /
• 제12권4호
• /
• pp.252-255
• /
• 2011

Carbon-based electric double-layer capacitors are being evaluated as potential energy-storage devices in an expanding number of applications. In this study, samples of carbon black (CB) treated at different temperatures ranging from $650^{\circ}C$ to $1100^{\circ}C$ were used as electrodes to improve the efficiency of a capacitor. The surface properties of the heat-treated CB samples were characterized by X-ray photoelectron spectroscopy and X-ray diffraction. The effect of the heat-treatment temperature on the electrochemical behaviors was investigated by cyclic voltammetry and in galvanostatic charge-discharge experiments. The experimental results showed that the crystallinity of the CBs increased as the heat-treatment temperature increased. In addition, the specific capacitance of the CBs was found to increase with the increase in the heat-treatment temperature. The maximum specific capacitance was 165 $F{\cdot}g-1$ for the CB sample treated at $1000^{\circ}C$.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.958-967
• /
• 2005

The mathematical model for tension behaviors of a moving web by Shin (2000) is extended to the tension model considering the thermal strain due to temperature variation in furnace. The extended model includes the terms that take into account the effect of the change of the Young's Modulus, the thermal coefficient, and the thermal strain on the variation of strip tension. Computer simulation study proved that the extended tension model could be used to analyze tension behaviors even when the strip goes through temperature variation. By using the extended tension model, a new tension control method is suggested in this paper. The key factors of suggested tension control method include that the thermal strain of strip could be compensated by using the velocity adjustment of the helper-rollers. The computer simulation was carried out to confirm the performance of the suggested tension control method. Simulation results show that the suggested tension control logic not only overcomes the problem of the traditional tension control logic, but also improves the performance of tension control in a furnace of the CAL (Continuous Annealing Line).

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.332-337
• /
• 2001

The objective of research is to clarify the interaction between dislocations and precipitates during high temperature creep deformation behaviors of high Mn austenitic steels. After measuring the internal stress in minimum creep rate at 873K, a transmission electron microscope (TEM) observation was performed to investigate the interaction between dislocations and precipitates during high temperature creep deformation. The band width of effective stress and internal stress increased when the nitride precipitates distribute more densely. Fine nitrides disturbed the dislocation movement with pinning the dislocations and perfect dislocations were separated into Shockley partial dislocations by fine nitrides. Coarse nitrides disturbed the dislocation movement with climb mechanism.