• Korean Journal of Materials Research
• /
• v.17 no.1
• /
• pp.31-36
• /
• 2007

Nanoimprint lithography (NIL) is a new lithographic method that offers a sub-10nm feature size, high throughput, and low cost. One of the most serious problems of NIL is the stiction between mold and resist. The antistiction layer coating is very effective to prevent this stiction and ensure the successful NIL results. In this paper, an antistiction layer was deposited by VSAM (vapor self assembly monolayer) method on silicon samples with FOTS (perfluoroctyltrichlorosilane) as a precursor for making an antistiction layer. A specially designed LPCVD (low pressure chemical vapor deposition) was used for this experiment. All experiments were achieved after removing the humidity. First, the evaporation test of FOTS was performed for checking the evaporation temperature at low pressure. FOTS was evaporated at 5 Tow and $110^{\circ}C$. In order to evaluate the temperature effect on antistiction layer, chamber temperature was changed from 50 to $170^{\circ}C$ with 0.1ml of FOTS for 1 minute. Good hydrophobicity of all samples was shown at about $110^{\circ}$ of contact angle and under $20^{\circ}$ of hysteresis. The surface energies of all samples calculated by Lewis acid/base theory was shown to be about 15mN/m. The deposited thicknesses of all samples measured by ellipsometry were almost 1nm that was similar value of the calculated molecular length. The surface roughness of all samples was not changed after deposition but the friction force showed relatively high values and deviations deposited at under $110^{\circ}$. Also the white circles were founded in LFM images under $110^{\circ}$. High friction forces were guessed based on this irregular deposition. The optimized VSAM process for FOTS was achieved at $170^{\circ}C$, 5 Torr for 1 hour. The hot embossing process with 4 inch Si mold was successfully achieved after VSAM deposition.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.148-156
• /
• 2023

This study was conducted in an indoor cultivation room and chamber where environmental control is possible to investigate the effect of temperature and irrigation interval on photosynthesis, growth and growth analysis of potted seedling cucumber. The light intensity (70 W·m^-2) and humidity (65%) were set to be the same. The experimental treatments were six combinations of three different temperatures, 15/10℃, 25/20℃, and 35/25℃, and two irrigation intervals, 100 mL per day (S) and 200 mL every 2 days (L). The treatments were named 15S, 15L, 25S, 25L, 35S, and 35L. Seedlings at 0.5 cm in height were planted in pots (volume:1 L) filled with sandy loam and treated for 21 days. Photosynthesis, transpiration rate and stomatal conductance at 14 days after treatment were highest in 25S. These were higher in S treatments with a shorter irrigation interval than L treatments. Total amount of irrigation water was supplied evenly at 2 L, but the soil moisture content was highest at 15S and lowest at 25S > 15L > 25L, 35S and 35L in that order. Humidity showed a similar trend at 15/10℃ (61.1%) and 25/20℃ (67.2%), but it was as high at 35/25℃ (80.5%). Cucumber growth (plant height, leaf length, leaf width, chlorophyll content, leaf area, fresh weight and dry weight) on day 21 was the highest in 25S. Growth parameters were higher in S with shorter irrigation intervals. Yellow symptom of leaf was occurred in 89.9% at 35S and 35L, where the temperature was high. Relative growth rate (RGR) and specific leaf weight (SLA) were high at 25/20℃ (25S, 25L), RGR tended to be high in the S treatment, and SLA in the L treatment. Water use efficiency (WUE) was high in the order of 25S, 25L > 15S > 15L, 35S, and 35L. As a result of the above, the growth and WUE were high at the temperature of 25/20℃.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.1
• /
• pp.91-99
• /
• 2008

A multilayer tower-type photoreactor, in which $TiO_2$-coated glass-tubes were installed, was used to measure the vapor-phase BTEX removal efficiencies by ozone oxidation ($O_3$/UV), photocatalytic oxidation ($TiO_2$/UV) and the combination of ozone and photocatalytic oxidation ($O_3/TiO_2$/UV) process, respectively. The experiments were conducted under various relative humidities, temperatures, ozone concentrations, gas flow rates and BTEX concentrations. As a result, the BTEX removal efficiency and the oxidation rate by $O_3/TiO_2$/UV system were highest, compared to $O_3$/UV and $TiO_2$/UV system. The $O_3/TiO_2$/UV system accelerated the low oxidation rate of low-concentration organic compounds and removed organic compounds to a large extent in a fixed volume of reactor in a short time. Therefore, $O_3/TiO_2$/UV system as a superimposed oxidation technology was developed to efficiently and economically treat refractory VOCs. Also, this study demonstrated feasibility of a technology to scale up a photoreactor from lab-scale to pilot-scale, which uses (i) a separated light-source chamber and a light distribution system, (ii) catalyst fixing to glass-tube media, and (iii) unit connection in series and/or parallel. The experimental results from $O_3/TiO_2$/UV system showed that (i) the highest BTEX removal efficiencies were obtained under relative humidity ranging from 50 to 55% and temperature ranging from 40 to $50^{\circ}C$, and (ii) the removal efficiencies linearly increased with ozone dosage and decreased with gas flow rate. When applying Langmuir-Hinshelwood model to $TiO_2$/UV and $O_3/TiO_2$/UV system, reaction rate constant for $O_3/TiO_2$/UV system was larger than that for $TiO_2$/UV system, however, it was found that adsorption constant for $O_3/TiO_2$/UV system was smaller than that for $TiO_2$/UV system due to competitive adsorption between organics and ozone.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.245-256
• /
• 2017

Objectives: The present study is aimed at performing real-time measurement of fibrous materials using an F-1 fiber monitor, investigating the correlations between the measurements and environmental conditions, and assessing the feasibility of the use of the monitor in actual exposure assessments based on the accuracy and reliability of the device. Methods: Asbestos specimens with a fixed asbestos content were dispersed in a chamber and collected with a particle measuring test device. Measurements obtained by the existing PCM method, and with the F-1 fiber monitor were compared. In addition, concentrations of asbestos fibers obtained by the PCM method, the TEM method, and the F-1 fiber monitor were compared with that of specific ABS scenarios in NOA regions. Correlations of asbestos contents in soil and weather conditions with each method of measurement were analyzed. Results: Laboratory results showed that levels of asbestos fibers measured with each method increased as fiber contents in soil increased. In the accuracy and reproducibility assessment, no significant differences were found between the different methods of measurement. On-site assessment results showed positive correlations among the methods, and these correlations were less significant compared with what was shown by the laboratory results. Levels of asbestos fibers increased as asbestos contents in soil increased, and as temperature increased. Levels of asbestos fibers decreased as humidity increased, and wind speed did not significantly affect the extent to which asbestos fibers were scattered. Conclusions: While it would be premature to replace existing methods with the use of F-1 fiber monitors in real sites based on the results of this study, the monitor may be useful in the screening of the sites, which assesses hazard levels in different regions. Replacement of existing methods with the use of F-1 fiber monitors may be possible after the limitations identified in this study are overcome, and additional assessment data are obtained and reviewed under different conditions to confirm the reliability of the monitor in future research. Obtained assessment results may be used as basic data for the assessment of asbestos hazard in NOA regions.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.479-486
• /
• 2012

This study was conducted to demonstrate quality characteristics of ginger by making aged ginger( AG) with two methods, the frist method was that ginger was aged at constant temperature and humidity chamber for the duration of 10, 20 and 30 days, and the other method was drying the ginger just after steaming it for 3 hours. As the age was being processed, the volume of ginger's appearance decreased rapidly and its color seemed to be darker because of the decrease in moisture. In the case of general components, the content of crude ash was depended on aged periods while the content of crude fat was independent with aged periods, and according to the content of crude protein, there was not any significant differences. The main valuable ingredient which is 6-gingerol showed the decreasing trend as it was exposed to heat with more time, and 6-shogaol which is also one of the main valuable ingredients showed high content at T-II(AG-10days). Free sugar and free amino acid of AG decreased as aged period goes by, and this study found that there were lots of essential amino acid (threonine, glutamic acid, alanine, valine, leucine and tyrosine) in ginger. The amount of unsaturated fatty acid of AG was significantly higher than the amount of saturated fatty acid of AG with the approximate ratio of 60:40, and the amount of free fatty acid of AG did not seem any big differences between AG and none AG. Considering both valuable ingredients and nutritive components, T-I (steamed ginger, SG) and T-II which was aged for 10 days were evaluated excellently.

• Research in Plant Disease
• /
• v.19 no.1
• /
• pp.55-59
• /
• 2013

The purpose of this experiment was to investigate the development of new spot disease on the leaf and stem of rosemary (Rosmarinus officinalis) in commercial greenhouses at Jeonju and Namwon in Korea. Incidence of target spot on rosemary was higher at the end of the rainy season with high humidity. Those symptoms were black ring spots (3-5 mm in diameter) and withering on green leaves and stems. Conidiophores and conidia were formed on the infected tissue in moist chamber and conidia were shown as the cylindrical and oval types in chain, ranged from 55 to $275{\mu}m$ in length, and 7 to $14{\mu}m$ in width. Conidia with eight to ten pseudosepta were formed on the conidiapore. The optimum growth temperature of isolates was $30^{\circ}C$ on the PDA medium under the dark condition. In the pathogenesis test, the target spot and withering symptoms were appeared on the leaves and stems 3 days after inoculation showing similar symptoms compared to those of in nature. The same fungus was re-isolated from infected lesion, indicating that Corynespora cassiicola caused leaf target spot and twig blight on rosemary. The rDNA ITS nucleotide sequences of the pure cultured isolate from the diseased area on rosemary showed 100% similarity to the sequences of C. cassiicola available in the GenBank database (JQ595296, JQ595297, FJ852715 and AY238606). Therefore, we report that the target spot of leaves and stems in rosemary was caused by C. cassiicola.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.222-229
• /
• 2022

Apples are the most grown fruit crops in the fruit industry of Korea. However, virus or viroid infection such as apple mosaic virus (ApMV), apple stem grooving capillovirus (ASGV), apple stem pitting virus (ASPV), apple chlorotic leaf spot virus (ACLSV), apple scar skin viroid (ASSVd) causes fruit yield reduction and poor fruit quality. Therefore, in this study, we examined to established an efficient virus-free system to eliminate the most infected ASGV virus in domestic apple orchard. We investigated that the shoot growth rate and the virus removal rate in ASGV infected potted apples that were treated with heat treatment in a growth chamber (constant temperature/humidity device) maintained at 36℃, 38℃ and 40℃ for 4 weeks. Here we found that the shoot growth rate was the highest in the heat treatment group (36℃) and the virus was removed in the middle and top of the shoot but not in the bottom. The virus was did not removed in the 38℃ and 40℃ heat treatment group in all section of shoots, and the heat treatment group (40℃) died after 4 weeks of heat treatment without growth of shoots. We performed in vivo shoot-tip grafting using the shoot-tip of potted apple heat-treated at 36 ℃, and we also investigated the viability and virus removal rate, which showed 94% viability and 20% virus removal rate. Collectively, our results suggest that it would be possible to produce the virus-free apple plants through heat treatment and shoot-tip grafting.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.137-144
• /
• 2013

The use of fiber-reinforced polymer (FRP) reinforcing bars in concrete structures has been increased as an alternative of steel reinforcement which has shown greater vulnerability to corrosion problem. However, the long-term performance of concrete members with FRP reinforcement is still questioned in comparison to the used of steel reinforcement. This study presents the results of an experimental study on the long-term behaviors of GFRP (glass fiber reinforced polymer) bar reinforced concrete beams after exposed to accelerated aging in an environmental chamber with temperature of $46^{\circ}C$ ($115^{\circ}F$) and 80% of relative humidity up to 300 days. The objectives of this research was to compare strength degradation and change of ductility between GFRP reinforced concrete beams and steel reinforcement beams after accelerated aging. Two types (wrapped and sand-coated surface) of GFRP bars and steel were reinforced. in concrete beams. Test results show that the failure modes of GFRP bar reinforced concrete beams are very similar with traditional RC beams, and the change of load-carrying capacity of steel reinforcing concrete beam is greater than that of GFRP bar reinforcing concrete beam under the accelerated aging. Test result also shows that the use of GFRP reinforcing in concrete could be introduced more brittle failure than that of steel reinforcing for practical application. The deformability factor up to compression failures indicates no significant variation before and after exposure of accelerated aging.

• Research in Plant Disease
• /
• v.26 no.3
• /
• pp.159-169
• /
• 2020

Pectobacterium carotovorum subsp. carotovorum (Pcc) causes bacterial soft rot on a wide range of crops worldwide, especially in countries with warm and humid climates. This study was conducted to establish an efficient screening method for resistant cultivars of Chinese cabbage to bacterial soft rot. Resistance degrees of 65 commercial Chinese cabbage cultivars to the Pcc KACC 10225 isolate were investigated. For further study, three Chinse cabbage cultivars (Taebong, Hadaejangkun, CR Alchan) showing different level of resistance to the bacterium were selected. The development of bacterial soft rot on the cultivars was tested according to several conditions such as growth stage of Chinse cabbage seedling, inoculum concentration, and incubation temperature after inoculation. On the basis of the results, we suggest that an efficient screening method for resistant Chinses cabbage to Pcc is to inoculate twenty one-day-old seedlings with a bacterial suspension of Pcc at a concentration of 1×10⁷ cfu/ml, and to incubate the plants in a dew chamber at 25℃ for 24 hr and then to cultivate in a growth room at 25℃ and 80% relative humidity with 12-hr light per day.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.321-331
• /
• 2016

Textiles damage caused by acetaldehyde($CH_3CHO$) is not clear as compared to other materials. Total 20 specimens were prepared using 4 different materials (silk, cotton, ramie, hemp) after dyed with 4 colors (undyed, red, yellow, blue, black). The specimens were exposed to $CH_3CHO$ gas in the test chamber. First, textile specimens' damage by differert concentration of acetaldehyde(0.1, 0.5, 1, 10, 100, 500, 1000 ppm) was tested. Second, accelerared damage to the textile specimens were tested according to the temperature and humidity conditions at the damage levels. Third, damage of deliberately degraded textile specimens were examined at the damage levels. After the exposure, optical, chemical, and physical evaluation was carried out. As a result, at 1000 ppm/day, the color difference of cotton_yellow has increased. At the condition of $25^{\circ}C-80%$, $30^{\circ}C-50%$, $30^{\circ}C-80%$, the color difference of yellow specimens has increased and grey scale rating has decreased. At $30^{\circ}C-80%$, acetate of cotton_undyed increased and the pH of silk_undyed decreased. In the case of deliberately degraded textile specimens, actetate concentration of black specimens increased. In conclusion, damage to the traditional fabric by acetaldehyde is not impact. However, it is expected that yellow specimens will be bleach and black specimens' actetate concentration will be increase.