• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.9-17
• /
• 2010

The LCC (Liquid Cadmium Cathode) structure to be developed for inhibiting the formation and growth of the uranium dendrite has been known as a key part in the electrowinning process for the simultaneous recovering of uranium and TRU (TRans Uranium) elements from spent fuels. A zinc-gallium (Zn-Ga) experimental system which is able to be functional in aqueous condition and normal temperature has been set up to observe the formation and growth phenomena of the metal dendrites on liquid cathode. The growth of the zinc dendrites on the gallium cathode and the performance of the existing stirrer type and pounder type cathode structure were observed. Although the mechanical strength of the dendrites appeared to be weak in the electrolyte and easily crashed by the various cathode structures, it was difficult to effectively submerge the dendrite into the bottom of the liquid cathode. Based on the results of the aqueous phase experiments, a lab-scale electrowinning experimental apparatus which are applicable to the development of LCC srtucture for the electrowinning process was established and the performance tests of the different types of LCC structure were conducted to prohibit the uranium dendrite growth on LCC surface. The experimental results of the stirrer type LCC structures have shown that they could not effectively remove the uranium dendrites growing at the inner side of the LCC crucible and the performances of the paddle and harrow type LCC structure were similar. Therefore a mesh type LCC structure was developed to push down the uranium dendrites to the bottom of the LCC crucible growing on the LCC surface and at the inner side of the crucible. From the experimental results for the performance test of the mesh type LCC structure, the uranium was recovered over 5 wt% in cadmium without the growth of uranium dendrites. After completion of the experiments, solid precipitates of the bottom of the LCC crucible were identified as an intermetallic compound (UCd11) by the chemical analysis.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.41-51
• /
• 1999

This study was conducted to investigate the effects of local climatic conditions on the annual increment of Korean white pine planted in Gapyung and Yaungdong. For this, stand variables such as mean DBH, mean height, basal area per hectare, and volume per hectare by stand age were measured and summarized for each locality. Based on these statistics, annual increments for 8 years from stand age 10 to 18 were calculated for each of stand variables. A topoclimatological technique which makes use of empirical relationships between the topography and the weather in study sites was applied to produce normal estimates of monthly mean, maximum, minimum temperatures, relative humidity, precipitation, and hours of sunshine. Then, the yearly climatic variables from 1990 to 1997 for each study site were derived from the spatial interpolation procedures based on inverse- distance weighting of the observed deviation from the climatic normals at the nearest 11 standard weather stations. From these estimates, 17 weather variables such as warmth index, coldness index, index of aridity etc., which affect the tree growth, were computed on yearly base for each locality. The deviations of measured annual increments from the expected annual increments for 8 years based on yield table of Korean white pine were then correlated with and regressed on the yearly weather variables to examine effects of local climatic conditions on the growth. Gapyung area provides better conditions for the growth of Korean white pine in the early stage than Youngdong area. This indicates that the conditions such as low temperature, high relative humidity, and large amount of precipitation provide favor environment for the early growth of Korean white pine. A ccording to the correlation and regression an analysis using local climatic conditions and annual increments, the growth pattern of Gapyung area corresponds to this tendency. However, it was found that the relationship between annual increments and local climatic conditions in Youngdong area shows different tendency from Gapyung. These results mean that the yearly growth pattern could not sufficiently be explained by climatic conditions with high variance in yearly weather variables. In addition, the poor growth in Youngdong area might not only be affected by climatic conditions, but also by other environmental factors such as site quality.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.549-557
• /
• 2006

The characteristics of supercritical water oxidation have been studied to decompose the waste anionic exchange resins which were produced from a power plant. The waste resins from a power plant were mixture of anionic and cationic exchange resins. The waste anionic exchange resins had been separated from the waste resins using a solid-liquid fluidized bed. It was confirmed that the cationic exchange resins were not included in the separated anionic exchange resins by the elemental and thermogravimetric analysis. A slurry of anionic exchange resins which could be fed continuously to a supercritical water oxidation apparatus by a high pressure pump was prepared using a wet ball mill. Although the COD of liquid effluent had been reduced more than 99.9% at 25.0 MPa and $500^{\circ}C$ within 2 min, the total nitrogen content was reduced only 41%. The addition of nitric acid to the slurry could reduce the total nitrogen content in treated water. The central composite design as a statistical desist of experiments had been applied to optimize the conditions of decomposing anionic resin slurry by means of the COD and total nitrogen contents in treated waters as the key process output variables. The COD values of treated waters had been reduced sufficiently to $99.9{\sim}100%$ af the reaction conditions of $500{\sim}540^{\circ}C$, 25.0 MPa within 2 min. The effects of temperature and nitric acid concentration on COD were not significant. However, the effect of nitric acid concentration on the total nitrogen was found to be significant. The regression equation for the total nitrogen had been obtained with nitric acid concentration and the coefficient of determination($r^2$) was 95.8%.

• Microbiology and Biotechnology Letters
• /
• v.45 no.1
• /
• pp.63-70
• /
• 2017

A functional screen of 60,672 fosmid metagenomic clones amplified from marine sediment obtained from the Dokdo islets in Korea identified the gene EstES1, whose product, EstES1, displayed lipolytic properties on tributyrin-supplemented media. EstES1 is a 576 amino acid protein with a predicted molecular weight of 59.4 kDa including 37 N-terminal leader amino acids. EstES1 exhibited the highest sequence similarity (44%) to a carboxylesterase found in Haliangium ochraceum DSM14365. Phylogenetic analysis indicated that EstES1 belongs to a currently uncharacterized family of lipases. Within the conserved domain, EstES1 retains the catalytic triad that consists of the consensus penta-peptide motif, GESAG. EstES1 demonstrated a broad substrate specificity toward the long acyl group of ethyl esters (C2-C12), and its optimal activity was recorded toward p-Nitrophenyl butyrate (C4) at pH 9.0 and $40^{\circ}C$ (specific activity of 255.4 U/mg). The enzyme remained stable in the ranges of $60-65^{\circ}C$ and pH 9.0-10.5 and in the presence of methanol, ethanol, isopropanol, and dimethyl sulfoxide. Therefore, EstES1 has potential for use in industrial applications involving high temperature, organic solvents, and/or alkaline conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.611-616
• /
• 2001

The bacteriological and physiochemical analysis of seawater in Tongyeong harbor was conducted to evaluate sanitary conditions, The samples were collected at 6 stations established once a month from January to December, 2000. During the study period, the ranges of temperature, transparency, chemical oxygen demand, dissolved oxygen, dissolved nitrogen, phosphate and chlorophyll-a were $6.8\sim25.2^{\circ}C,\;1.0\sim2.5\;m,\;1.79\sim2.41\;mg/L,\;5.7\sim10.1\;mg/L,\;6.59\sim10.53{\mu}g-at/L,\;0.56\sim1.01{\mu}g-at/L\;and\;1.21\sim9.54\;mg/m^3$, respectively, The viable cell counts of seawater in Tongyeong harbor ranged from $3.0\times10^4CFU/mL\;to\;6.9\times10^6CFU/mL$. The coliform group and fecal coliform MPN's of the samples were ranged $23\~4,600\;MPN/100\;mL$ (means 540 MPN/100 mL) and $11\~1,600\;MPN/100\;mL$ (means 210 MPN/100 mL), respectively, The coliform group was classified with IMViC reactions and pathogenic vibrios were analyzed. Two hundred eighteen strains that were obtained from seawater samples in Tongyeong harbor represented Escherichia coli group, $66.1\%$; Citrobacter freundii group, $11.0\%$; Enterobacter aerogenes, $9.6\%$; and unknown, $13.3\%$, respectively. During the study period, infectious bacteria such as Vibrio cholerae O1, Salmonella sp. and Shigella sp. were not detected from the samples, but detection ratios of V. parahaemolyticus, V cholerae non-O1 and V. vulnificus were $10.0\sim30.1\%$.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.674-680
• /
• 2005

The purposes of this study were to compare the effect of several reheating treatments (heating in the frying pan, convection oven and microwave oven) on sensory characteristics and to evaluate the safety during storage period of cook/chill Pajeon. The sensory evaluations were made on 5 sensory attributes by a 9-member panel using quantitative descriptive analysis (QDA). The fresh cooked Pajeon and the Pajeon reheated in the frying pan obtained a significantly (p<0.01) higher score in taste than the ones reheated in a convection oven and microwave oven. The reheated cook/chill Pajeon had a significantly (p<0.01) lower score in flavor than the freshed cooked one. Regardless of the reheating methods, sensory scores in texture of the Pajeon reheated at $v$ for 1 day were not different from that of fresh cooked one. However, the scores of the reheated ones in a convection oven and in a microwave oven decreased with storage time up to 5 days at $3^{\circ}C$. On the other hand, the Pajeon reheated in the frying pan, even after 3 days' storage at $3^{\circ}C$, was not found to be inferior to the freshed cook one in every quality attributes except flavor. Therefore, the reheating treatment in frying pan may be superior to those in a convection oven and a microwave oven. The safety of Pajeon was also evaluated by measuring total count, coliform count, psychrotrophic count, acid value and peroxide value during 5 days of storage periods at $4^{\circ}C$. Total counts of Pajeon was ranged from not detectable to $5.2\times10^2$ CFU/g. The coliform and psychrotroph were not detected at all experiments. The acid values were ranged from 1.90 to 4.03 mg of KOH/g of fat until 5 days at $4^{\circ}C$. And the peroxide values were ranged from 3.63 to 12.50 meq of peroxide/kg of fat until 5 days of storage period. Therefore, these results demonstrated that Pajeon is microbiologically and chemically safe during 5 days of storage period at refligeration temperature.

• Korean Journal of Ichthyology
• /
• v.26 no.4
• /
• pp.310-321
• /
• 2014

Change in fish species composition after the Hebei Spirit oil spill in December 2007 off Taean were determined by analysis of samples collected in Mailpo beach, 10 km south from the oil spill site and polluted by the crude oil. Fish samples were collected by a beach seine in the shallow water at Malipo beach during the low tide of the new moon from February 2008 to December 2009. Five seine hauls were made during the day and the night in each sampling time. Monthly day and night samples did not show the significant differences in species composition. A total of 21 species, 1,032 individuals and 6,544 g of fish were collected in 2008, and 31 species, 4,206 individuals and 35,659 g of fish in 2009. The species collected were composed of the small-sized fish or juveniles. Abundant fishes were the resident species in coastal water, and the migrants were low in abundance. Among the fish occurred, Chelon haematochelius, Sebastes schlegelii, Takifugu niphobles and Pleuronectes yokohamae were predominated in abundance of both years. Monthly fish abundance and species diversity in 2008 were significantly lower than those in 2009. A few number of resident fish were collected from February to June 2008 showing the lowest in May 2008, and fish abundance increased from July 2008. The number of species and abundance of fish in 2009 were increased in spring as the temperature raised, showed a peak in summer and decreased in autumn. This monthly variation in fish species composition and abundance was similar to those in the non-polluted water in other temperate waters. Low fish abundance during several months after oil spill was considered to be related to the residual oil in the water and habitat disturbance due to oil cleaning activity in the beach. Monthly fish species compositions after September 2008 were similar to those of 2009 suggested that the impact on the shallow water fish by the oil residuals was not too significant at least to the fish species composition after September 2008.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1865-1870
• /
• 2014

To synthesize ${\omega}$-3 and ${\omega}$-6 balanced polyunsaturated fatty acid (PUFA) oil mixture, flaxseed oil and sesame oil were mixed and their anti-oxidative and sensory characteristics analyzed. For the fatty acid composition analysis results, the ${\omega}$-3 and ${\omega}$-6 PUFA ratios of the F20S80 oil mixture (flaxseed oil 20% and sesame oil 80% oil mixture) and F10S90 (flaxseed oil 10% and sesame oil 90% oil mixture) were represented as 1 to 10 and 1 to 5 ratio for ${\omega}$-3 and ${\omega}$-6 PUFA content from 4.4% to 42.1% and 8.9% to 39.7%, respectively. Since these were within 1:4~1:10 for healthy functional ${\omega}$-3 and ${\omega}$-6 balanced PUFA oil mixtures, these oil mixtures were healthy functional oil mixtures. To analyze anti-oxidative effects, acid values were analyzed. Samples were stored at room temperature, 70% relative humidity (RH) and $45^{\circ}C$, and 70% RH for 16 weeks. The acid value between F10S90 and S100 stored at $45^{\circ}C$ and 70% RH for 16 weeks were not statistically significant. The sensory characteristics such as oxidative odor and sesame odor and taste were not statistically significant among F20S80, F10S90, and sesame S100. Sensory characteristics between F10S90 and S100 stored at $45^{\circ}C$ and 70% RH for 16 weeks were not statistically significant. In conclusion, the sensory and oxidative characteristics of F10S90 were similar to those of S100. Therefore, F10S90 oil mixture should be used as a ${\omega}$-3 and ${\omega}$-6 balanced PUFA healthy functional oil mixture with high anti-oxidative effects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1248-1256
• /
• 2014

The purpose of this study was to investigate the mechanisms of behind $SO_2$ formation and elevated cause of reducing power in purple bamboo salt (PBS) along with an analysis of physicochemical properties, content of sulfur compounds, oxidation reduction potential (ORP), mineral contents of salt type (MSS, mudflat solar salt; BS, bamboo salt), and addition of raw bamboo (RB). $SO_2$ content of 630 ppm was detected in PBS. $SO_2$ was not detected in MSS, BS, or RB, whereas $SO_2$ (782 ppm) from $K_2SO_4$ was detected after heating a NaCl, KCl, $MgCl_2$, $MgSO_4$, MgO, $CaCl_2$, $K_2SO_4$, and $FeSO_4$ with RB. $SO_2$ content of BS increased with baking time, and it originated from BSRB1 (13.88 ppm) to BSRB4 (109.13 ppm). $SO_3{^{2-}}$ originated only from MSSRB4 and BSRB2~BSRB4. Sulfate ion content decreased along with increasing $SO_2$ and sulfite ion contents. ORP increased with baking time of MSS and BS, and it was present at higher levels in BSRB4 (-211.40 mV) of BS than MSS. Insoluble content was higher in BS than MSS. Further, Ca, K, and Mg ion contents decreased in MSS and increased in BS with baking time. BSRB4 had 1.4 fold higher levels of Ca, 1.5 fold higher levels of Mg, and 1.8 fold higher levels of K than BS. Li, Al, Mn, Fe, and Sr in MSS as well as Al, Fe, and Ni in BS increased with baking time. Anions (Cl, $NO_3$, and Br) and heavy metals (Pb, Cd, Hg, and As) between MSS and BS were not significantly different. These results suggest that the reducing power of BS was due to $SO_2$ and sulfite ion. To increase the amounts of these compounds and reducing power, higher melting temperature and longer baking time are necessary along with BS, which is created by the addition of RB to roasted salt.