• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.334-335
• /
• 2005

Ternary tellurite glassy systems ($Li_2O-V_2O_5-P_2O_5$) have been synthesised using Vanadium oxide as a network former and Lithium oxide as network modifier. The addition of a metal? oxide makes them electric or mixed electric-ionic conductors, which are of potential interest as cathode' materials for solid-state batteries. This glass-ceramics crystallized from the $Li_2O-V_2O_5-P_2O_5$ system are particularly interesting, because they exhibit high conductivity (up to $5.95\times10^{-4}$ S/cm) at room temperature. the glass samples were prepared by quenching the melt on the copper plate and the glass-ceramics were heat-treated at crystallizing temperature determined from differential thermal analysis (DTA). The electric D.C conductivity result have been analyzed in terms of a small polaron-hopping model.

• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.507-513
• /
• 1996

Nonlinear optical properties of TeO2-PbO-GeO2 glasses were investigated and their correlation with struc-tural modification was investigated. Third-order nonlinear susceptibility $\chi$, ranged between 5.0$\times$10-13 esu and 10.7$\times$10-13 esu which are approximately 20-40 times larger than that of silica glass. The glass with a composition of 85(80TeO2-20PbO)-15GeO2(mol%) seemed to provide an optimum compromise between $\chi$and the stability against crystallization. Analyses of the Raman spectra suggested that these glasses are mainly composed of [TeO4] tbp, [TeO3]tp and [GeO4] tetrahedral structural units. It was concluded that the positive contribution of Pb2+ with high polarizability to $\chi$ in TeO2-PbO glasses overwhelmed the negative influence due to the structural modification of [TeO4]tbplongrightarrow[TeO3]tp. On the other hand addition of GeO2 in TeO2-PbO-GeO2 glasses resulted in the decrease of $\chi$ values. This behavior was attributed to the formation of [GeO4] polyhedra at the expense of [TeOn] polyhedra and Pb2+ ions which normally sowed a higher contribu-tion to $\chi$ than [GeO4] polyhedra.

• Korean Journal of Veterinary Research
• /
• v.30 no.2
• /
• pp.203-214
• /
• 1990

A total of 166 strains of Salmonella (S) typhimurium var copenhagen isolated from pigeons (164 strains) and aquatic birds (2 strains) were examined for the biochemical characteristics and plasmid profiles. All the strains were sensitive to ampicillin, chloramphenicol, gentamicin, kanamycin and sulfadimethoxine. But 13 strains(7.8%) were resistant to streptomycin (Sm), 2 (1.2%) to tetracycline, 2 (1.2%) to rifampicin, and 1 (0.6%) to nalidixic acid. Among drug resistant strains, only one strain resistant to Sm contained conjugative R plasmid which was fertility inhibition and incompatibility group $I_{\alpha}$. All the strains were sensitive to cobalt chloride, cupric sulfate, lead nitrate, mercuric chloride and silver nitrate. Of 166 isolates, 6 (3.6%) were resistant to sodium arsenate and 1 (0.6%) to potassium tellurite. Among 166 isolates, 1 (0.6%) was colicinogenic, 12 (7.2%) sucrose fermenters, and 166 (100%) maltose fermenters. Plasmid profiles were confirmed as being 4 or 5 plasmids, and their molecular weight ranged 3.2 to 60 megadalton (MD). All the strains harbored 60 Md plasmid. There are three patterns by the plasmid profile, 150 isolates (90.4%) were pattern I (3.2, 3.5, 33, 60Md), 14 (8.4%) pattern II (3.2, 3.5, 29, 60Md), and 2 (1.2%) pattern III (4.2, 7.8, 8.5, 15, 60Md). S typhimurium var copenhagen strains containing 60Md plasmid were resistant to killing by 90% normal guinea pig serum.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.4
• /
• pp.509-516
• /
• 2020

An important property of glass and ceramic solid waste forms is processability. Tellurite materials with low melting temperatures and high halite solubilities have potential as solid waste forms. Crystalline TiTe3O8 was synthesized through a solid-state reaction between stoichiometric amounts of TiO2 and TeO2 powder. The resultant TiTe3O8 crystal had a three-dimensional (3D) structure consisting of TiO6 octahedra and asymmetric TeO4 seesaw moiety groups. The melting temperature of the TiTe3O8 powder was 820℃, and the constituent TeO2 began to evaporate selectively from TiTe3O8 above around 840℃. The leaching rate, as determined using the modified American Society of Testing and Materials static leach test method, of Ti in the TiTe3O8 crystal was less than the order of 10-4 g·m-2·d-1 at 90℃ for durations of 14 d over a pH range of 2-12. The chemical durability of the TiTe3O8 crystal, even under highly acidic and alkaline conditions, was comparable to that of other well-known Ti-based solid waste forms.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.617-622
• /
• 2008

In this study, the additivity factors of compositions to density and glass transition point ($T_g$) in a $xLi_2O-(1-x)[(1-y)TeO_2-yZnO]$ (0$T_g$ was discussed. As a method for predicting the relation between glass structure and ionic conductivity, density was measured by the Archimedes method. The glass transition point was analyzed to predict the relation between ionic conductivity and the bonding energy between alkali ions and non-bridge oxygen (NBO). The relation equations showing the additivity factor of each composition to the two properties are as follows: Density(g/$cm^3$) = $2.441x_1\;＋\;5.559x_2\;＋\;4.863x_3\;T_g(^{\circ}C)$ = $319x_1\;＋\;247x_2\;＋\;609x_3\;－\;1950x_1x_3$ ($x_1$ : fraction of $Li_2O$, $x_2$ : fraction of $TeO_2$, $x_3$ : fraction of ZnO) The density decreased as $Li_2O$ content increased. This was attributed to change of the $TeO_2$ structure. From this structural result, the electric conductivity of the glass samples was predicted following the ionic conduction mechanism. Finally, it is expected that electric conductivity will increase as the activation energy for ion movement decreases.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.791-795
• /
• 2013

The aim of this study was to compare the performance of a standard culture method and polymerase chain reaction (PCR) for the detection of Staphylococcus aureus (S. aureus) in milk and meat products. Milk, dried infant formula, sausage and ground beef that had been artificially inoculated with S. aureus were enriched in tryptic soy broth. After the enrichment, a loopful was inoculated onto Baird-Parker agar with egg-yolk-tellurite. In parallel, 23S rRNA was amplified by PCR from samples of the enriched broth. Suspected S. aureus colonies grown on selective agars were finally confirmed by a coagulase test and colony PCR. No significant statistical differences were observed between the incidence of S. aureus detected by the culture method and the incidence detected by PCR, in milk or dried infant formula. However, in sausage and ground beef, the number of positives detected by PCR was significantly higher than by the culture method (p<0.05). Our findings suggest that PCR could be an effective screening tool for the detection of S. aureus compared to the standard culture method.

• Journal of Food Hygiene and Safety
• /
• v.27 no.2
• /
• pp.169-175
• /
• 2012

Five kinds of selective media, such as mannitol salt agar (MSA), Baird-Parker agar (BPA), Baird-Parker supplemented with rabbit plasma fibrinogen (BPA+RPF), CHROMagar Staphylococcus aureus (CSA), and Petrifilm Staph Express count system (Petrifilm), were compared to recommend the optimum selective media for isolation of Staphylococcus aureus from agricultural products. Seventy four target and non target bacteria were inoculated on five selective media to analyze sensitivity and specificity. In the recovery test of injured S. aureus cells, S. aureus was exposed to acid (1% lactic acid for 10 min), heat ($60^{\circ}C$ for 90s), and cold ($-20^{\circ}C$ for 1h) conditions. And artificially contaminated agricultural products (iceberg lettuce, green pepper, and cherry tomato) was enumerated on five selective media. The sensitivity of BPA+RPF, CSA, Petrifilm, MSA, and BPA were 100%, 100%, 100%, 90.5%, 90.5%, respectively. In addition, the specificity of BPA+RPF, CSA, MSA, BPA and Petrifilm were 100%, 100%, 84.6%, 75.0%, 67.3%, respectively. However, no difference among five selective media was observed in recovery on injured S. aureus cell and enumeration from agricultural products. This results suggest that BPA+RPF and CSA are the optimum media for detection of S. aureus from agricultural products.