• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.685-688
• /
• 2008

A Next Generation Network (NGN) is a packet-based network able to provide services including Telecommunication Services and able to make use of multiple broadband, QoS-enabled transport technologies and in which service-related functions are independent from underlying transport-related technologies. It offers unrestricted access by users to different service providers. It supports generalized mobility which will allow consistent and ubiquitous provision of services to users in this paper. we describe the trend of standardization activity related with open services environment capabilities which had been finally approved at September 2008 in ITU-T. ITU-T SG13 is responsible for studies relating to the architecture, evolution and convergence of next generation networks including frameworks and functional architectures, signalling requirements for NGN.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.528-543
• /
• 2008

Internet Protocol Television (IPTV) provides an interactive and personalized service for realizing integrated broadcasting and telecommunication services. Set-top box (SIB) connected to TV is an essential component required for IPTV and has a unique hardware identifier used in identification and authentication. It means that subscriber authentication based on box-level identification is inconsistent with IPTV's main intention of providing personalized services. The proposed solution is to provide an opportunity to use the flexible user-centric authentication mechanism through Java Card applets in IPTV application server and 3G networks. This paper suggests personalized services by moving the user's private data and authentication management beyond the STB to a truly personalized device, the ubiquitous mobile phone. In addition, this paper presents effectiveness and security analysis for verifying the proposal.

• The Journal of the Korea Contents Association
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2006

With the improvement of information telecommunication technology, the various service in broadband integrated services digital networks have a wide range of delay, delay jitter and cell loss probability requirements according to traffic specification. Therefore, the design of appropriate control schemes that can satisfy the cell loss, delay requirements with various traffic specification for B-ISDN is an extremely important challenging problem. In this paper, we propose a priority control scheme using a window counter and a cell counter per each type of class. In the proposed priority control scheme, for satisfying required service quality, we performed the priority control scheme using the delay/loss factors obtained by comparing window counter with cell counter. The performance of proposed control scheme is estimated by computer simulation. In the results of simulation, we verified that the proposed method satisfied per class requirements as the results showed that cell loss probability has a order of video, data, voice and delay time has a order of video, voice and data.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.127-136
• /
• 2007

With the construction of vast networks, Internet based services such as online games and Internet banking are steadily increasing. As dysfunctions of the trend, various threats from worms/viruses to hacking are proliferating and new types and variations of worms/viruses are emerging. In response to the problems, telecommunication carriers and the government we establishing systems to cope with infringement accidents and resultant damages. However, in case of nationwide emergencies like the 1.25 Accident, infringement may spread rapidly while analyzing what kind of infringement it is and that may result in enormous losses. Thus, the paper purposed to analyze the states of infringement accidents occurring at each network and coping methods and checklist, based on the results. and to propose strategies for controlling services in case of large scale infringement accidents.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1063-1079
• /
• 2010

Vehicle ad hoc networks (VANET) are one of the most important technologies to provide various ITS services. While VANET requires rapid and reliable transmission, packet transmission in VANET is unstable because of high mobility. Many routing protocols have been proposed and assessed to improve the efficiency of VANET. However, topology-based routing protocols generate heavy overhead and long delay, and position-based routing protocols have frequent packet loss due to inaccurate node position. In this paper, we propose a position-based routing repair algorithm to improve the efficiency of VANET. This algorithm is proposed based on the premise that AODV (-PGB) can be used effectively in VANET, if the discovery, maintenance and repair mechanism of AODV is optimized for the features of VANET. The main focus of this algorithm is that the relay node can determine whether its alternative node exits and judge whether the routing path is disconnected. If the relay node is about to swerve from the routing path in a multi-hop network, the node recognizes the possibility of path loss based on a defined critical domain. The node then transmits a handover packet to the next hop node, alternative nodes and previous node. The next node repairs the alternative path before path loss occurs to maintain connectivity and provide seamless service. We simulated protocols using both the ideal traffic model and the realistic traffic model to assess the proposed algorithm. The result shows that the protocols that include the proposed algorithm have fewer path losses, lower overhead, shorter delay and higher data throughput compared with other protocols in VANET.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.21-27
• /
• 2004

In an urban area telecommunication using wireless system, the accurate prediction and analysis of wave propagation characteristics are very important to determine the service area optimized selection of base station, and eel design, etc. In the stage of these analyses, we have to present the propagation prediction mood which is varied with the type of antenna, directional angle, and configuration of the ground in our urban area in addition we need to perform an analysis of the conventional mode which is similar to ours and dig out the parameters to evaluate the wave environment before the cell design for the selected area. In this paper, we propose a wave propagation prediction model concerning the topography and obstacles in our urban area. We extract the parameters and apply them to the proposed wave environment for the simulation analyzing the propagation characteristics. Throughout these analyzing procedure, we extracted the essential parameters such as the position of the base station, the height of topography, and adequate type and height of the antenna with our preferable cuteness.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1271-1279
• /
• 2018

The telecommunication industry, which has traditionally formed its own market area, has also been affected by the after shock of the digitalization triggered by computer communications. In the telecommunications industry, digitalization or digital services refers to network functional virtualization supported by software defined networks. The digitalization of the telecom industry is changing rapidly, and the participants are not limited to the traditional equipment suppliers and service providers in established market, but includes virtually all social entities. To understand this new change, focusing on whether the traditional equipment suppliers that have traditionally played a pivotal role in the center of change will continue its role in this new era of digitalization or not, and how they are progressing toward end-to-end digital services, the goal of digitalization, will lead us to the good understanding of ongoing digitalization.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.382-387
• /
• 2008

Current global construction market has grown at a dramatic expansion rate every year in connection with more market accessibility by foreign contractors. The market openness is largely due to globalization of world construction markets, rapid development of world-wide telecommunication technologies, the formation of collaborative acquisitions and joint ventures among contractors, development of regional Free Trade Blocks, and just name a few. This paper focuses on the formation of collaborative networks when expanding into new foreign markets. The social network analysis (SNA) is introduced to investigate a variety of the collaboration patterns and also their impacts on the performance. To this end, the collaboration cases of 600 international construction projects performed by Korean contractors since 1990 were collected and classified into firm's size, project types, collaboration modes, and performance levels using social network analysis. The results showed a direction in establishing business strategy associated with experienced or inexperienced contractors in international construction projects.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.91-99
• /
• 2009

Development of high-speed Internet services and the increased supply of mobile devices have become the key factor for the acceleration of ubiquitous technology. WiBro system, formed with lP backbone network, is a MBWA technology which provides high-speed multimedia service in a possibly broader coverage than Wireless LAN can offer. Wireless telecommunication environment needs not only mobility support in Layer 2 but also mobility management protocol in Layer 3 and has to minimize handover latency to provide seamless mobile services. In this paper, we propose a fast cross-layer handover scheme based on signal strength prediction in WiBro environment. The signal strength is measured at regular intervals and future value of the strength is predicted by Exponential Smoothing Method. With the help of the prediction, layer-3 handover activities are able to occur prior to layer-2 handover, and therefore, total handover latency is reduced. Simulation results demonstrate that the proposed scheme predicts that future signal level accurately and reduces the total handover latency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.239-247
• /
• 2013

In network based on multi-interface, there are needed channel assignment strategy that reduce interference and improve bandwidth efficiency by assigning each interface to available channels in order to utilize effectively multiple wireless interfaces on each node. MCS protocol had been proposed, which improve capacity and throughput of network by using hybrid assignment. MCS uses as the criterion to assign channel the number of node that use the same channel in contention area. but there have an problem that this information exactly does not reflect actually offered channel load. in this paper, we proposes CAMCS protocol to assign channel by that the channel busy degree to indicate the occupancy rate of channel by nodes as well as the number of nodes that use the same channel in inference area is used as criterion for estimation channel load, and conform performance improvement effect by simulation.