• 제목/요약/키워드: telecommunication cost

검색결과 289건 처리시간 0.025초

Flat Plate Type 소형 냉각소자 개발 (Development of Flat Plate Type Small Cooling Device)

  • 문석환;황건;유인규;조경익;유병곤
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 동계학술발표대회 논문집
    • /
    • pp.170-174
    • /
    • 2008
  • Recently, a problem related to the thermal management in portable electronic and telecommunication devices is becoming issued. That is due to the trend of slimness of the devices, so it is not easy to find the optimal thermal management technology for the devices. From now on, a pressed circular type cooling device has been mainly used, however the cooling device with thin thickness is becoming needed by the inner space constraint. In the present study, the silicon and metal flat plate type cooling device with the separated vapor and liquid flow path was designed and fabricated. Through the experimental study, the normal isothermal characteristic by vapor-liquid phase change was confirmed and the cooling device with 70mm of total length showed 6.8W of the heat transfer rate within the range of $4{\sim}5^{\circ}C$/W of thermal resistance. In the meantime, the metal cooling device was developed for commercialization. The device was designed to have all structures of evaporator, vapor flow path, liquid flow path and condenser in one plate. And an envelope of that could be completed by combining the two plates of same structure and size. And the simplicity of fabrication process and reduction of manufacturing cost could be accomplished by using the stamping technology for fabricating large flow paths relatively. In the future, it will be possible to develop the commercialized cooling device by revising the fabrication process and enhancing the thermal performance of that.

  • PDF

GPS/DR기반의 차상열차위치검지방안 연구 (The study on scheme for train position detection based on GPS/DR)

  • 신경호;정의진;이준호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2006년도 추계학술대회 논문집
    • /
    • pp.802-810
    • /
    • 2006
  • 정밀한 열차제어를 위해서는 열차위치의 정확한 검지가 반드시 필요하다. 현재 일반적으로 널리 사용되고 있는 열차검지방법은 궤도회로를 이용하는 방법이다. 궤도회로는 구성이 단순하며, 신뢰성이 확보되는 장점이 있다. 하지만 열차는 궤도회로 위에서만 검지가 가능하므로 모든 지상구간에 궤도회로를 설치해야하며 설치 및 유지보수에 많은 비용이 소모된다. 또한 궤도회로는 폐전로 구성의 특성 때문에 불연속적인 위치검지만이 가능하다. 최근 통신기술의 발달과 차상제어장치의 첨단화에 따라 열차의 위치검지는 열차에서 직접 검지하는 방법들이 연구되고 있다. 차상중심의 위치검지방식은 열차의 위치, 속도, 시각정보를 연속적으로 측정하여 열차의 제어정보로 사용하는 방식이다. 이러한 차상중심의 위치검지방식은 무선기반 열차제어 및 자기부상열차제어와 같이 궤도회로의 사용을 최소화 하는 최근 열차제어시스템의 개발동향이다. 본 논문에서는 GPS항법 및 DR항법의 특징을 분석하고 GPS항법과 DR항법의 단점을 보완하는 구조를 가지는 GPS/DR기반의 차상열차위치검지방식을 제안하였다. 항법오차의 추정자로서 3차윈 위치 오차, 자세각 오차, 타코메타 환산계수 오차를 상태변수로 하는 5차 칼만필터를 사용하여 최적의 위치오차 및 DR항법용 센서의 오차 추정이 가능하도록 필터를 설계하였으며 모의시험을 통해 GPS/DR기반의 차상열차위치검지장치의 위치추정성능을 확인하였다.

  • PDF

이동 컴퓨팅 시스템 환경에서 데이터 복제 재배치 기법 (Data Replicas Relocation Strategy in Mobile Computing System Environment)

  • 최강희;조태남
    • 한국정보처리학회논문지
    • /
    • 제6권10호
    • /
    • pp.2587-2596
    • /
    • 1999
  • 최근에 이동 컴퓨터의 성능향상과 LAN이나 무선 통신 네트워크, 위성서비스와 같은 확장된 기술을 이용하여 사용자는 이동 중에도 데이터베이스에 접근가능하게 되었다. 또한 이동 사용자가 이동중에도 정보를 손실없이 빠르게 얻기 위해, 서버에 정보를 복제하여 사용하는 방법이 연구되고 있다. 지금까지는 이동 호스트가 복제 서버에 데이터를 족제하는 방법인 정적 복제 기법(Static Replica Allocation : SRA)기법을 사용하고 있다. 이 기법은 이동 호스트가 셀에 이동하고나서, 복제서버에 데이터를 복제하는 방법이다. 이것은 네트워크가 양호하고, 이동 사용자의 수가 적은 경우라면, 데이터를 사용하는데는 문제가 없지만, 셀에서 이동 사용자가 존재하고 있지 않다면, 그 데이터는 공유되지 못하는 데이터가 된다. 그래서, 본 논문에서는 이동 사용자가 많은 셀에 데이터를 복제하여 재배치 하는 기법인 선택복제기법(User Select Replica Allocation : USRA)을 제안하였다. 그리고 정적 복제기법을 사용하였을 때와 본 논문에서 제안된 기법을 비교하여, 데이터 접근 비율을 이동성과 셀의 수에 따른 성능을 분석하였다. 그래서 그 결과, 이동 호스트들의 이동성이 낮을 때에는 접근 비용에서, 제시된 기법이 정적 복제 기법보다 120% 낮게 나타났다. 그리고 이동률에 따른 접근비용이 40%~50% 감소되었음을 알 수 있다. 마지막으로 셀의 수에 따라서, 선택복제기법의 확장성은 10%정도 떨어짐을 알 수 있다.

  • PDF

WiBro와 HSDPA 망간 서비스 연속성을 제공하기 위한 Hybrid Mobil IP 프로토콜 (Hybrid Mobile IP Protocol for Service Session Continuity between WiBro and HSDPA)

  • 김성진;최우진
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.223-228
    • /
    • 2008
  • 현재 WLAN, WiBro, HSDPA 등의 다양한 형태의 망 환경들이 존재함에 따라 이러한 다양한 형태의 망간 연동을 통한 시너지 효과를 활용하여 사용자에게 높은 질의 서비스를 제공하려는 수많은 시도들이 이루어지고 있으며 우선적으로 단말이 이종망간에 이동을 하더라도 서비스 연속성을 제공하여 주는 이동성 제공 기술에 관한 연구들이 활발히 진행 중에 있다. 그러나 이미 상용 서비스를 제공 중인 이종 망간(i.e., WiBro 와 HSDPA)에 서비스 연속성을 제공하는 데 있어서는 접속 망 자체의 기본적인 기술적 특성 (i.e., 전송 속도, Coverage, QoS)이외에도 이미 망을 Deployment하여 서비스를 제공 중인 사업자의 현실적인 문제 (i.e., 접속 망 기능 변경의 어려움 및 비용) 등 다양한 변수들도 존재하며 이러한 망의 다양성을 충족시키면서 망간 서비스 연속성을 제공하기 위해서는 하나의 독자적인 이동성 기술로는 한계를 가지게 된다. 따라서 본 논문에서는 이미 망이 Deployment되어 상용 서비스 중인 Wi-Bro와 HSDPA망간에 서비스 연속성을 제공하기 위해서 발생할 수 있는 현실적인 문제점들을 제시하고 이를 고려한 효율적인 이동성 프로토콜을 제안한다. 본 논문에서는 Client Mobile IPv4(CMIPv4)와 Proxy Mobile IPv4 (PMIPV4)의 기술적인 장점을 취하고, 이미 Deployment되어 서비스를 제공 중인 망의 상황에 따라 유동적으로 CMIPv4와 PMIPv4 기술을 동시에 혼재하여 적용가능 한 Hybrid Mobile IP의 이동성 기술 방안을 제안하였다.

  • PDF

국사 광역화와 광코어 절감을 위한 파장분할다중 기반의 1기가급 수동 광가입자망 Reach Extender 효율 극대화 기술 개발 (The Development of 1G-PON Reach Extender based on Wavelength Division Multiplexing for Reduction of Optical Core)

  • 이규만;권택원
    • 디지털융복합연구
    • /
    • 제17권8호
    • /
    • pp.229-235
    • /
    • 2019
  • 인터넷을 비롯한 광대역 멀티미디어 수요가 폭발적으로 증가함에 따라 스마트폰, IPTV, VoIP, VOD, 클라우드 등의 새로운 서비스의 등장으로 유발된 데이터 통신량의 폭주로 가입자망의 고도화가 통신 산업에서 가장 큰 이슈가 되고 있다. 본 연구에서는 파장분할다중방식(Wavelength Division Multiplexing, WDM) 수동형 광가입자망(Passive Optical Network, PON)의 국사 광역화와 광코어 절감을 위한 1기가급 Reach Extender(RE) 기술에 대한 개발을 시도하였다. 특히, 시장 경쟁력을 강화하기 위하여 광부품의 저가화와 소형화, 집적화, 소비 전력 폭주를 대처하기 위한 저전력화 등을 고려하였다. 또한, 기존 PON망에 RE 기술을 이용하여 전송 거리 확장 기술 개발 및 광선로의 용량 증가 기술 개발을 통한 신뢰성 기술, 원격관리 기술을 통합하여 일괄 시스템 개발을 완료하였다. 개발 시스템을 이용하여 기존 상용 1G PON 장비들과의 시스템 연동을 기반으로 개발 시스템을 이용한 국사 광역화와 광코어 절감을 이룬 것에 그 가치를 둘 수 있다. 본 연구를 기반으로 10G PON 기술 개발에 대한 연구를 진행 중이다.

다중플립 오류정정을 위한 새로운 QECCs (New QECCs for Multiple Flip Error Correction)

  • 박동영;김백기
    • 한국전자통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.907-916
    • /
    • 2019
  • 본 논문은 CNOT 게이트만을 사용해 모든 다중비트플립 오류들로부터 표적큐비트를 완벽하게 보호할 수 있는 새로운 5-큐비트 다중비트플립코드를 제안하였다. 제안한 다중비트플립코드는 기존의 단일비트플립코드에서와 같이 근원오류부에 Hadamard 게이트 쌍들을 임베딩 할 경우에 쉽게 다중위상플립코드로 확장될 수 있다. 본 논문의 다중비트플립코드와 다중위상플립코드는 4 개 보조큐비트들에 의한 상태벡터 오류정보를 공유한다. 이 4-큐비트 상태벡터들은 Pauli X와 Z 정정이 수반되는 모든 다중플립오류들이 특정 근원오류를 공통으로 포함하는 특성을 반영한다. 이 특성을 이용해 본 논문은 Pauli X와 Z 근원오류의 검출과 정정을 단 3개의 CNOT 게이트로 배치 처리함으로써 다중플립 오류정정을 위한 QECC 설계에도 불구하고 저비용 실현이 가능함을 보였다. 본 논문이 제안한 5-큐비트 다중비트플립코드와 다중위상플립코드는 100% 오류정정율과 50% 오류판별율 특성을 보였다. 이 논문에 제시된 모든 QECC는 QCAD 시뮬레이터를 사용해 검증되었다.

이차원 고객충성도 세그먼트 기반의 고객이탈예측 방법론 (A Methodology of Customer Churn Prediction based on Two-Dimensional Loyalty Segmentation)

  • 김형수;홍승우
    • 지능정보연구
    • /
    • 제26권4호
    • /
    • pp.111-126
    • /
    • 2020
  • CRM의 하위 연구 분야로 진행되었던 고객이탈예측은 최근 비즈니스 머신러닝 기술의 발전으로 인해 빅데이터 기반의 퍼포먼스 마케팅 주제로 더욱 그 중요도가 높아지고 있다. 그러나, 기존의 관련 연구는 예측 모형 자체의 성능을 개선시키는 것이 주요 목적이었으며, 전체적인 고객이탈예측 프로세스를 개선하고자 하는 연구는 상대적으로 부족했다. 본 연구는 성공적인 고객이탈관리가 모형 자체의 성능보다는 전체 프로세스의 개선을 통해 더 잘 이루어질 수 있다는 가정하에, 이차원 고객충성도 세그먼트 기반의 고객이탈예측 프로세스 (CCP/2DL: Customer Churn Prediction based on Two-Dimensional Loyalty segmentation)를 제안한다. CCP/2DL은 양방향, 즉 양적 및 질적 로열티 기반의 고객세분화를 시행하고, 고객세그먼트들을 이탈패턴에 따라 2차 그룹핑을 실시한 뒤, 이탈패턴 그룹별 이질적인 이탈예측 모형을 독립적으로 적용하는 일련의 이탈예측 프로세스이다. 제안한 이탈예측 프로세스의 상대적 우수성을 평가하기 위해 기존의 범용이탈예측 프로세스와 클러스터링 기반 이탈예측 프로세스와의 성능 비교를 수행하였다. 글로벌 NGO 단체인 A사의 협력으로 후원자 데이터를 활용한 분석과 검증을 수행했으며, 제안한 CCP/2DL의 성능이 다른 이탈예측 방법론보다 우수한 성능을 보이는 것으로 나타났다. 이러한 이탈예측 프로세스는 이탈예측에도 효과적일 뿐만 아니라, 다양한 고객통찰력을 확보하고, 관련된 다른 퍼포먼스 마케팅 활동을 수행할 수 있는 전략적 기반이 될 수 있다는 점에서 연구의 의의를 찾을 수 있다.

실시간 응용을 위한 웨이블릿 변환 기반의 얼굴 검출 (Wavelet Transform-based Face Detection for Real-time Applications)

  • 송해진;고병철;변혜란
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제30권9호
    • /
    • pp.829-842
    • /
    • 2003
  • 최근 화상 회의, 화상 전화, 모바일 환경에서의 화상 통신, 얼굴 인식을 이용한 보안 시스템 등의 상업화에 힘입어 비디오에서의 얼굴 검출 및 추적 기술은 눈부신 발전을 이룩하였다. 또한, 얼굴 요소 검출은 요소 그 자체뿐 아니라 정화한 얼굴 영역 검출을 위한 필수 단계로서 중요한 연구 주제가 되고 있다. 그러나 영상에 나타난 복잡한 배경과 카메라 조작 및 조명에 의한 색상 왜곡 그리고 다양한 조명 조건 둥은 얼굴 검출 및 추적, 요소 검출에 있어 여전히 큰 장애가 되고 있다. 이에 따라, 본 논문에서는 실시간 화상 통신을 위한 새로운 얼굴 영역 검출 및 추적 알고리즘과 검출된 얼굴 영역에서 효과적으로 눈 영역을 검출할 수 있는 알고리즘을 제안한다. 제안하는 얼굴 검출 알고리즘은 복잡한 배경과 다양한 조명 조건에 관계없이 얼굴을 검출하고 추적하기 위해 웨이블릿 변환된 세 종류의 부 영역을 이용하여 얼굴 형판을 생성하고 웨이블릿 변환된 입력 영상과의 유사도를 측정하여 얼굴을 검출한다. 특히 다양한 조명 조건을 극복하기 위해 최소-최대 정규화와 히스토그램 평활화를 혼합 적용하여 매우 밝거나, 매우 어두운 영상에서의 얼굴 오 검출 및 놓침을 줄일 수 있었으며 세 가지 크기의 얼굴 형판을 이용함으로써 입력 영상에 존재하는 다양한 크기의 얼굴도 검출할 수 있었다. 또한 효과적인 얼굴 추적 알고리즘을 통해 다음 프레임에서의 얼굴 위치를 예측하고 예측된 얼굴 위치를 중심으로 탐색 영역을 정해 형판 정합을 수행함으로써 얼굴 검출률을 높이면서 수행 시간도 단축시킬 수 있었다. 수직, 수평방향 투영을 이용한 합리적인 눈 검출 알고리즘은 어두운 조명이나 부정확한 얼굴 영역에서도 만족스러운 결과를 보여주었다.26$이었으며, 점차 감소, 다시 증가하여 담금 10일에는 $3.42{\sim}3.69$이었다. 시험구별로는 KKR이 가장 낮았다. 총산은 담금 1일에 $0.29{\sim}0.82%$였으며 담금 6일에 $1.75{\sim}2.53%$로 최고값을 나타내었으며 그 후 감소하여 담금 10일에는 $1.61{\sim}2.34%$였다. 시험구간에는 KKR, SKR이 비교적 높은 값을 나타내었다. 무기질 함량은 발효기간이 경과할수록 증하였고 Ca는 $2.95{\sim}36.76$, Cu는 $0.01{\sim}0.14$, Fe는 $0.71{\sim}3.23$, K는 $110.89{\sim}517.33$, Mg는 $34.78{\sim}122.40$, Mn은 $0.56{\sim}5.98$, Na는 $0.19{\sim}14.36$, Zn은 $0.90{\sim}5.71ppm$을 나타내었으며, 시험구별로 보면 WNR, BNR구가 Na만 제외한 다른 무기성분 함량이 가장 높았다.O to reduce I/O cost by reusing data already present in the memory of other nodes. Finally, chunking and on-line compression mechanisms are included in both models. We demonstrate that we can obtain significantly high-performance

한미간(韓美間) 정보통신분야(情報通信分野) 통상마찰예방(通商摩擦豫防)과 해소방안(解消方案)에 관한 연구(硏究) (A study on The U.S.-Korean Trade Friction Prevention and Settlement in the Fields of Information and Telecommunication Industries)

  • 정재영
    • 무역상무연구
    • /
    • 제13권
    • /
    • pp.869-895
    • /
    • 2000
  • The US supports the Information and Communication (IC) industry as a strategic one to wield a complete power over the World Market. However, several other countries are also eager to have the support for the IC industry because the industry produces a high added value and has a significant effect on other industries. Korea is not an exception. Korea recently succeeded in the commercialization of CDMA for the first time in the world, after the successful development of TDX. Hence, it is highly likely to get tracked by the US. Although the IC industry is a specific sector of IT, there is a concern that there might be a trade friction between the US and Korea due to a possible competition. It will be very important to prepare a solution in advance so that Korea could prevent the friction and at the same time increase its share domestically and globally. It will be our important task to solve the problem with the minimum cost if the conflict arises unfortunately in the IT area. The parties that have a strong influence on the US trade policy are the think tank group and the IT-related interest group. Therefore, it would be important to have a close relationship with them. We found some implications by analyzing the case of Japan, which has experienced trade frictions with the US over the long period of time in the high tech industry. In order to get rid of those conflicts with the US, the Japanese did the following things : (1) The Japanese government developed supporting theories and also resorted to international support so that the world could support the Japanese theories. (2) Through continual dialogue with the US business people, the Japanese business people sought after solutions to share profits among the Japanese and the US both in the domestic and in the worldwide markets. They focused on lobbying activities to influence the US public opinion to support the Japanese. The specific implementation plan was first to open culture lobby toward opinion leaders who were leaders about the US opinion. The institution, Japan Society, were formed to deliver a high quality lobbying activities. The second plan is economic lobby. They have established Japanese Economic Institute at Washington. They provide information about Japan regularly or irregularly to the US government, research institution, universities, etc., that are interested in Japan. The main objective behind these activities though is to advertise the validity of Japanese policy. Japanese top executives, practical interest groups on international trade, are trying to justify their position by direct contact with the US policy makers. The third one is political lobby. Japan is very careful about this political lobby. It is doing its best not to give impression that Japan is trying to shape the US policy making. It is collecting a vast amount of information to make a correct judgment on situation. It is not tilted toward one political party or the other, and is rather developing a long-term network of people who understand and support the Japanese policy. The following implications were drawn from the experience of Japan. First, the Korean government should develop a long-term plan and execute it to improve the Korean image perceived by American people. Second, the Korean government should begin public relation activities toward the US elite group. It is inevitable to make an effort to advertise Korea to this elite group because this group leads public opinion in the USA. Third, the Korean government needs the development of a relevant policy to elevate the positive atmosphere for advertising toward the US. For example, we need information about to whom and how to about lobbying activities, personnel network who immediately respond to wrong articles about Korea in the US press, and lastly the most recent data bank of Korean support group inside the USA. Fourth, the Korean government should create an atmosphere to facilitate the advertising toward the US. Examples include provision of incentives in tax on the expenses for the advertising toward the US and provision of rewards to those who significantly contribute to the advertising activities. Fifth, the Korean government should perform the role of a bridge between Korean and the US business people. Sixth, the government should promptly analyze the policy of IT industry, a strategic area, and timely distribute information to industries in Korea. Since the Korean government is the only institution that has formal contact with the US government, it is highly likely to provide information of a high quality. The followings are some implications for business institutions. First, Korean business organization should carefully analyze and observe the business policy and managerial conditions of US companies. It is very important to do so because all the trade frictions arise at the business level. Second, it is also very important that the top management of Korean firms contact the opinion leaders of the US. Third, it is critically needed that Korean business people sent to the USA do their part for PR activities. Fourth, it is very important to advertise to American employees in Korean companies. If we cannot convince our American employees, it would be a lot harder to convince regular American. Therefore, it is very important to make the American employees the support group for Korean ways. Fifth, it should try to get much information as early as possible about the US firms policy in the IT area. It should give an enormous effort on early collection of information because by doing so it has more time to respond. Sixth, it should research on the PR cases of foreign enterprise or non-American companies inside the USA. The research needs to identify the success factors and the failure factors. Finally, the business firm will get more valuable information if it analyzes and responds to, according to each medium.

  • PDF