• Corrosion Science and Technology
• /
• v.14 no.1
• /
• pp.12-18
• /
• 2015

Since the operation period of nuclear power plants has increased, the degradation of buried pipes gradually increases and recently it seems to be one of the emerging issues. Maintenance on buried pipes needs high quality of management system because outer surface of buried pipe contacts the various soils but inner surface reacts with various electrolytes of fluid. In the USA, USNRC and EPRI have tried to manage the degradation of buried pipes. However, there is little knowledge about the inspection procedure, test and manage program in the domestic nuclear power plants. This paper focuses on the development and build-up of real-time monitoring and control system of buried pipes. Pipes to be tested are tape-coated carbon steel pipe for primary component cooling water system, asphalt-coated cast iron pipe for fire protection system, and pre-stressed concrete cylinder pipe for sea water cooling system. A control system for cathodic protection was installed on each test pipe which has been monitored and controlled. For the calculation of protection range and optimization, computer simulation was performed using COMSOL Multiphysics (Altsoft co.).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.224-234
• /
• 2017

This paper compares the realities of the salary Peak Policy's status and management processes in Korea and Japan, with the aim of determining the development direction for Korea's salary Peak Policy's. Unlike Japan, which successfully achieved close cooperation between government, firms and workers in implementing the Retirement Age Extension Type salary Peak Policy, Korea experienced many problems due to lack of preparation. In order to rationally develop the salary Peak Policy, the government, firms, and workers must cooperate to increase the policy's efficiency via the following steps. First, gradually increase the proportion of retirement age extension. Second, career development that takes into account the various employment types, flexible working hours and aged workers. Third, development of training programs for senior citizen workers, as well as increasing support for changing of jobs and startups. Fourth, expansion of re-employment after retirement age and ways to make use of the skilled labor. Fifth, increasing work efficiency through bonuses and work evaluation that is specialized for aged workers. This paper argues that such measures are necessary for the co-existence of firms and workers, as well as for improving employment stability and labor market flexibility.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.297-302
• /
• 2010

The AtoN is subsidiary navigation facilities for ship to navigate safely. AtoN includes signs of visual, sound, special and radio. Receltly as GNSS and AIS are developed rapidly, AtoN has been considered as a promising candidate technique for ensuring fairway safety of ship. However, present AtoN systems are not adopted to ship fully, but are adopted to ship partly, and total management systems are not installed. In this study, AtoN Monitoring system based on AIS is developed. It consists of AIS system and AIS viewer program. In the system AIS gathers data of AtoN and ship information and AIS viewer is a program that plots AIS data on ECDIS.

• Molecules and Cells
• /
• v.28 no.5
• /
• pp.447-453
• /
• 2009

The quorum sensing (QS) inhibitors that antagonize TraR, a receptor protein for N-3-oxo-octanoyl-L-homoserine lactones (3-oxo-C8-HSL), a QS signal of Agrobacterium tumefaciens were developed. The structural analogues of 3-oxo-C8-HSL were designed by in silico molecular modeling using SYBYL packages, and synthesized by the solid phase organic synthesis (SPOS) method, where the carboxamide bond of 3-oxo-C8-HSL was replaced with a nicotinamide or a sulfonamide bond to make derivatives of N-nicotinyl-L-homoserine lactones or N-sulfonyl-L-homoserine lactones. The in vivo inhibitory activities of these compounds against QS signaling were assayed using reporter systems and compared with the estimated binding energies from the modeling study. This comparison showed fairly good correlation, suggesting that the in silico interpretation of ligand-receptor structures can be a valuable tool for the pre-design of better competitive inhibitors. In addition, these inhibitors also showed anti-biofilm activities against Pseudomonas aeruginosa.

• Journal of Convergence for Information Technology
• /
• v.12 no.1
• /
• pp.7-14
• /
• 2022

Unlike general maps, the underground geospatial Information is a system made to view underground information in a 3D shape. This system is managed by a tile maps to lighten the data. But there are various underground structures in the basement, and the structures are made of 3D data, so the data size is large. Therefore, when a client mobile program requests a tile map, the service server fetches the requested tile map from the DB server and transmits ti to the client, but there is a transmission delay time problem. In this paper, we design the tile cache method to improve the request response speed for the tile map data provided to the client in the mobile underground geospatial information system. We propose a method in which a service server predicts and prefetchs the next tile map while the client is viewing tile map, and stores the prefetching data in the memory of client mobile terminal. Then, the transmission delay time problem can be solved.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.227-233
• /
• 2010

This study analyzed performance according to kick point and stiffness of Soft-$golf^{TM}$ shaft. This research team developed soft-$golf^{TM}$ as a new fusion sports with similar motions with golf and it can be learned safely for all age groups in 2002. The head of Soft-$golf^{TM}$ club is made of zinc alloy and has a mesh or a grid structure, and shaft uses carbon graphite to reduce the total weight of the club. To improve carry distance and to assure consistency of a ball during Soft-$golf^{TM}$ swing, this study manufactured shaft with various kick points (low, middle and high) and stiffness (stiff, regular, lady, morelady) and analyzed a swing motion with characteristics of each shaft presented in a dynamic condition such as a ball's speed, a head's torsion angle and a ball's deviation with ProAnalyst program through a high-speed camera taking pictures using a swing machine robot system(Robo-7). From all of the results, this study determined an appropriate shaft of Soft-$golf^{TM}$.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.560-567
• /
• 2013

In this paper, it is proposed the fault detection method of the ASIC, without the Test Requirement Document(TRD), extracting internal logic circuit and analyzed the function of the ASIC using the multipurpose development program and simulation. If there don't have the TRD, it is impossible to analyze the operation of the circuit and find out the fault detection in any chip. Therefore, we make the TRD based on the analyzed logic data of the ASIC, and diagnose of the ASIC circuit at the gate level through the signal control of I/O pins using the Dynamic Pattern signal. According to the experimental results of the proposed method, we is confirmed the good performance of the fault detection capabilities which applied to the non-memory circuit.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.127-140
• /
• 2022

With the recent development of the ICT (information and communication technology), the revolution of the industry has moved on from the third industry to the fourth. There is no doubt that the companies would not survive in the future without adopting these technologies. The purpose of this research is to analyze the intellectual structure of the internet of things(IoT) literature for the Industry 4.0 to suggest a better insight for the field. The data for this research is extracted from the Web of Science database. Total of 1,631 documents and 72,754 references are used for the research with the analysis program CiteSpace. Author co-citation analysis is used to analyze the intellectual structure and performed clustering, timeline and burst detection analysis. We identified 12 sub-areas of IoT for the Industry 4.0 which are 'Supply Chain', 'Digital Twin', 'Smart Manufacturing System' and etc. Through the timeline analysis we can find out which clusters will increase or decrease its reputation. As concluding remarks, limitations and further research suggestions are discussed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.357-373
• /
• 2013

In this paper, a back analysis program for analyzing the behavior of tunnel-ground system and evaluating the material properties and tunnel design parameters was developed. This program was designed to be able to implement the back analysis of underground structure by combination of using FLAC and optimized algorithm as direct method. In particular, Rosenbrock method which is able to do direct search without obtaining differential coefficient was adopted for the back analysis algorithm among optimization methods. This back analysis program was applied to the site to evaluate the design parameters. The back analysis was carried out using field measurement results from 5 sites. In the course of back analysis, nonlinear regression analysis was carried out to identify the optimum function of the measured ground displacement. Exponential function and fractional function were used for the regression analysis and total displacement calculated by optimum function was used as the back analysis input data. As a result, displacement recalculated through the back analysis using measured displacement of the structure showed 4.5% of error factor comparing to the measured data. Hence, the program developed in this study proved to be effectively applicable to tunnel analysis.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.69-79
• /
• 2013

In this paper, DCT(Discrete Cosine Transform) and CAVLC(Context Adaptive Variable Length Coding) are co-designed as hardware IP with software operation of the other modules in H.264/AVC codec. In order to increase the operation speed, a new method using SHIFT table is proposed. As a result, enhancement of about 16(%) in the operation speed is obtained. Designed Hardware IPs are downloaded into Virtex-4 FX60 FPGA in the ML-410 development board and H.264/AVC encoding is performed with Microblaze CPU implemented in FPGA. Software modules are developed from JM13.2 to make C code. In order to verify the designed Hardware IPs, Modelsim program is used for functional simulation. As a result that all Hardware IPs and software modules are downloaded into the FPGA, improvement of processing speed about multiples of 16 in case of DCT hardware IP and multiples of 10 in case of CAVLC compared with software-only processing. Although this paper deals with co-design of H/W and S/W for H.264, it can be utilized for the other embedded system design.