• Structural Engineering and Mechanics
• /
• v.7 no.4
• /
• pp.377-386
• /
• 1999

The stress distribution in a symmetrically laminated composite plate subjected to in-plane compression are evaluated using finite element analysis. Six different finite element models are created for the study of stresses in the plate after buckling. Two finite element modelling approaches are adopted to obtain the stress distribution. The first approach starts with a full model of shell elements from which sub-models of solid elements are spin-off The second approach adopts a full model of solid elements at the beginning from which sub-models of solid elements are created. All sub-models have either 1-element thickness or 14-element thickness. Both techniques show high interlaminar direct and shear stresses at the free edges. The study also provides vital information of the distribution of all components of stresses along the unloaded edges in length direction and also in the thickness direction of the plate.

• Geomechanics and Engineering
• /
• v.22 no.6
• /
• pp.475-488
• /
• 2020

The recent increase in the use of Expanded Polystyrene (EPS) geofoam in construction and geotechnical projects has driven researchers to investigate its behavior, more deeply. In this paper, a series of experimental tests to investigate the stress-strain behavior and the mechanical properties of EPS blocks, under monotonic axial loading are presented. Four different densities of cylindrically shaped EPS with different dimensions are used to investigate the effects of loading rate, height and diameter, as well as the influence of the density of EPS on the stress-strain response. The results show that increasing the height of the EPS samples leads to instability of the sample and consequent lower resistance to the applied pressure. Large EPS samples show higher Young's modulus and compressive resistance due to some boundary effects. An increase in the rate of loading can increase the elastic moduli and compressive resistance of the EPS geofoam samples, which also varies depending on the density of the samples. It was also determined that the elastic modulus of EPS increases with increasing EPS density. By implementing an efficient numerical procedure, the stress-strain response of EPS geofoam samples can be reproduced with great accuracy. The numerical analysis based on the proposed method can used to evaluate the effect of different factors on the behavior of EPS geofoam.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.9
• /
• pp.1444-1454
• /
• 2020

Objective: Cold stress induces oxidative damage and impairs energy status of broilers. N-acetylcysteine (NAC) exhibits antioxidant properties and modulates energy metabolism of animals. This study was conducted to investigate the effects of NAC on energy status and antioxidant capacity of heart and liver in the cold-stressed broilers. Methods: The experiment consisted of 4 treatments in a 2×2 factorial arrangement with two diets (basal diet or plus 0.1% NAC) and two ambient temperatures (thermoneutral [conventional ambient temperature] or cold stress [10℃±1℃ during days 15 to 42]). Results: No ascites were seen in cold-stressed broilers. NAC did not attenuate the impaired growth performance of stressed birds. However, NAC decreased plasma asparagine but increased aspartate levels in cold-stressed birds (p<0.05). NAC reduced hepatic adenosine triphosphate (ATP) but elevated adenosine diphosphate contents in unstressed birds (p<0.05). The hepatic ratio of adenosine monophosphate (AMP) to ATP was increased in birds fed NAC (p<0.05). NAC decreased plasma malondialdehyde (MDA) level and cardiac total superoxide dismutase (T-SOD) activity in unstressed birds, but increased hepatic activities of T-SOD, catalase and glutathione peroxidase in stressed birds (p<0.05). NAC down-regulated hepatic AMP-activated protein kinase but up-regulated cardiac heme-oxigenase mRNA expression in stressed birds, and decreased expression of hepatic peroxisome proliferator-activated receptor coactivator-1α as well as hypoxia-inducible factor-1α in liver and heart of birds. Conclusion: Dietary NAC did not affect energy status but enhanced the hepatic antioxidant capacity by increasing the activities of antioxidant enzymes in cold-stressed broilers.

• Journal of the Korean Geographical Society
• /
• v.38
• /
• pp.37-59
• /
• 1988

The aim of this study is to investigate the influence of the technological changes on locational changes on the assumption that technological changes cover over all industrial sectors. The study is carred on 1) To investigate the theoretical backgrounds of the technological and locational changes and their problems. 2) To investigate the location and economic characteristics of the Korean textile industry. 3) To investigate the technological development and regional variations in technological level. 4) To the relationship of the technological change to the location of the textile industries. The locational change of the Korean textile industries have been closely related to economic characteristics. In the begining stage of development in the 1950's, thetextile industries were largely concentrated in the major cities(Seoul, Pusan, Taegu, Masan et. al.). In the growing stage of development in the 1960's, the textile industries were relocated in suburban areas with the trend of large corporations building their branch plants of chemical fibers in the suburbs. With the expansion in the export industry in the 1970's, the textile companies were distributed throughout the whole country. But the research and development(R&D) activities caused the textile industries reconcentrate around Seoul and Pusan, owining to the change of the economic environments in the 1980's. The 1980's have witnessed the increased R&D investment for the development of better new and value-added products. This was because the technological level was much higher than that of Taegu and Other regions. What is more, plant birth location and branch plant location support that locational changes of textile industry were caused by technological changes. Plant birth location put stress technological environments of region, compared with branch plant locaiton. Accordingly, the technological changes of industry can be an important factor in locational changes. Through this study, it can be seen that locational changes come from technological changes. Other locational factors influence the industrial locations, but regional variations in technological level which has been relatively ignored has to be considered on the location study. Together with the accomplishments of existing location study, the study on technological change and location can better explain the location phenomena. And further research on technological change and location can provide better policy implications for regional development.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2004.10a
• /
• pp.25-28
• /
• 2004

• Steel and Composite Structures
• /
• v.19 no.3
• /
• pp.585-599
• /
• 2015

This paper presents the experimental work on fatigue life and specific fatigue strength of circular hollow sectioned steel tube and wood filled circular hollow section steel tube. Burning effect was observed in the case of circular hollow sectioned steel tube when it is subjected to Maximum bending moment of 19613.30 N-mm at 4200 rpm, but this did not happen in the case of wood filled hollow section. Statistical analysis was done based on the experimental data and relations have been built to predict the number of cycles for the applied stress or vice versa. The relations built in this paper can safely be applied for design of the fatigue life or fatigue strength of circular hollow sections and wood filled hollow sections. Results were validated by static specific bending strengths determined by ANSYS using a known applied load.

• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.758-768
• /
• 2012

This paper presents the modeling and position-sensorless vector control of a dual-airgap axial flux permanent magnet (AFPM) machine optimized for use in flywheel energy storage system (FESS) applications. The proposed AFPM machine has two sets of three-phase stator windings but requires only a single power converter to control both the electromagnetic torque and the axial levitation force. The proper controllability of the latter is crucial as it can be utilized to minimize the vertical bearing stress to improve the efficiency of the FESS. The method for controlling both the speed and axial displacement of the machine is discussed. An inherent speed sensorless observer is also proposed for speed estimation. The proposed observer eliminates the rotary encoder, which in turn reduces the overall weight and cost of the system while improving its reliability. The effectiveness of the proposed control scheme has been verified by simulations and experiments on a prototype machine.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.67-85
• /
• 2009

This study aims to provide the research for dental technician's stress prevention and management with basic materials by understanding dental technician's psychosocial stress level and examining relevant factors. The subject of this study is 255 dental technologists who work mainly in Seoul Gyeonggi district for a month of April of 2009 and I conducted cross-sectional study through self administered survey. The contents of survey include general feature, occupational feature, health behavior feature. I used Karasek's Job Content Questionnaire, JCQ and Psychosocial well-being index, PWI-SF as means of measurement. To compare the level of dental technician's psychosocial stress, I conducted t-test and ANOVA and I measured the factors that are related with psychosocial stress symptom with step by step multiple regressive analysis. According to the result of Cronbach's a value which is yielded to verify the reliability of means of measurement, the reliability of concept is sufficient. The detailed result of this study is as follows. 1. According to the result of analyzing the stress symptom in accordance with general feature and occupational feature, those dental technologists who are older and not married, graduate from junior college, have lower position, work at university hospital or general hospital show lower stress(p<0.05). There is no difference in the level of psychosocial stress with regard to duty related feature, period of service, daily average working hours, monthly average pay. 2. With regard to health behavior feature, those dental technologists who control weight better and have meal more regularly show lower stress(p<0.05). Those dental technicians who smoke, drink liquid and take a suitable sleep show low stress but the difference does not have significance statistically. 3. With regard to the factors of stress in the workplace, those dental technicians who have lower duty related requirement, have higher duty related control ability, have higher social support, have less instability of employment and have less workload and physical burden show lower stress(p<0.05). 4. According to the result of analyzing the factors that influence dental technologist's stress symptom, social support has the most enormous influence on stress symptom. Unstable employment, regular exercise, regular eating, daily average sleeping hours and technological capacity are also important in this order. According to the result of this study, those dental technicians who have higher social support, less instability of employment, do exercise more regularly, take enough sleep more soundly and have higher technological capacity show lower psychosocial stress symptom. Therefore, to adjust appropriately the dental technician's stress and properly maintain and improve the dental technician's mental health, effective management plan that enables dental technicians to maintain smooth human relationships for dental technicians should be sought. In addition, heath education and health management for dental technicians should be given more thoroughly so that they can establish desirable health behavior in daily life.

• Structural Engineering and Mechanics
• /
• v.48 no.5
• /
• pp.587-613
• /
• 2013

A 3-node 3D co-rotational beam element using vectorial rotational variables is employed to consider the geometric nonlinearity in 3D space. To account for shape versatility and reinforced concrete cross-sections, fibre model has been derived and conducted. Numerical integration over the cross-section is performed, considering both normal and shear stresses. In addition, the derivations associated with material nonlinearity are given in terms of elasto-plastic incremental stress-strain relationship for both steel and concrete. Steel reinforcement is treated as elasto-plastic material with Von Mises yield criterion. Compressive concrete behaviour is described by Modified Kent and Park model, while tensile stiffening effect is taken into account as well. Through several numerical examples, it is shown that the proposed 3D co-rotational beam element with fibre model can be used to simulate steel and reinforced concrete framed structures with satisfactory accuracy and efficiency.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.983-984
• /
• 2006

The correct computer simulation of the powder compaction stage requires the determination of the elastoplastic parameters which characterize its mechanical behavour. Instrumented dies are frequently used to monitor the longitudinal and radial stress occurring during powder compaction. When strain gages are employed a previous calibration is needed. Many sources of error exist that can lead to the incorrect calibration of the instrumented die. By means of a FEM simulation some of these problems are analysed. The effect of die wall thickness, compression length, and strain location are studied.