Browse > Article
http://dx.doi.org/10.12989/scs.2015.19.3.585

Fatigue behavior of circular hollow tube and wood filled circular hollow steel tube  

Malagi, Ravindra R. (Department of PDM, Visvesvaraya Technological University)
Danawade, Bharatesh A. (Department of PDM, Visvesvaraya Technological University)
Publication Information
Steel and Composite Structures / v.19, no.3, 2015 , pp. 585-599 More about this Journal
Abstract
This paper presents the experimental work on fatigue life and specific fatigue strength of circular hollow sectioned steel tube and wood filled circular hollow section steel tube. Burning effect was observed in the case of circular hollow sectioned steel tube when it is subjected to Maximum bending moment of 19613.30 N-mm at 4200 rpm, but this did not happen in the case of wood filled hollow section. Statistical analysis was done based on the experimental data and relations have been built to predict the number of cycles for the applied stress or vice versa. The relations built in this paper can safely be applied for design of the fatigue life or fatigue strength of circular hollow sections and wood filled hollow sections. Results were validated by static specific bending strengths determined by ANSYS using a known applied load.
Keywords
stiffness; fatigue life; specific fatigue strength; reversed cycle stress; S-N curve;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Bao, Z., Eckelman, C. and Gibson, H. (1996), "Fatigue strength and allowable design stresses for some wood composites used in furniture", Holz als Roh-und Werkstoff, 54(6), 377-382.   DOI
2 Berndt, F. and Van Bennekorn, A. (2001), "Pump shaft failures-a compendium of case studies", Eng. Fail. Anal., 8(2), 135-144.   DOI
3 Bhaumik, S.K., Rangaraju, R., Parameswara, M.A., Venkataswamy, M.A., Bhaskaran, T.A. and Krishnan, R.V. (2002), "Fatigue failure of a hollow power transmission shaft", Eng. Fail. Anal., 9(4), 457-467.   DOI
4 Chen, X., Jin, D. and Kim, K.S. (2006), "Fatigue life prediction of type 304 stainless steel under sequential biaxial loading", Int. J. Fatigue, 28(3), 289-299.   DOI
5 da Fonte, M. and de Freitas, M. (1999), "Stress intensity factors for semi elliptical surface cracks in round bars under bending and torsion", Int. J. Fatigue, 21(5), 457-463.   DOI
6 Danawade, B., Malagi, R. and Malagi, S. (2013), "Flexural strength properties of teak wood filled rectangular hollow sectioned thin steel tube and its application in automobile", SAE Technical Paper, 2013-01-1179.
7 Dawood, M. Rizikalla, S. and Summer, E. (2007), "Fatigue and overloading beviour of steel-concrete composite flexural members strengthened with high modulus CFRP materials", J. Compos. Construct., 11(6), 659-669.   DOI
8 DuPont, Design guide manual 1, Dupont Engineering polymers, Reorder No.: H-76838, 70-71.
9 Fine Testing Machines (2008), Product Catalog, Model FTG-8(D), 2008/163.
10 Kim, Y. and Heffernan, P. (2008), "Fatigue behavior of externally strengthened concrete beams with fiber reinforced polymers: State of the art", J. Compos. Construct., 12(3), 246-256.   DOI
11 Mahagaonkar, S.B., Brahmankar, P.K. and Seemikeri, C.Y. (2009), "Effect on fatigue performance of shot peened components: An analysis using DOE technique", Int. J. Fatigue, 31(4), 693-702.   DOI
12 Miscow, G.F., de Miranda, P.E.V., Netto, P.A. and Placido, J.C.R. (2004), "Techniques to characterize behavior of full size drill pipes and small scale samples", Int. J. Fatigue, 26(6), 575-584.   DOI
13 Roeder, C., Lehman, D. and Bishop, E. (2010), "Strength and stiffness of circular concrete filled tubes", J. Struct. Eng., 136(12), 1545-1553.   DOI
14 Schneider, C.R.A. and Maddox, S.J. (2003), "Best practice guide on statistical analysis of fatigue data", International Institute of Welding, IIW-XIII-WG1-114-03.
15 Shgley, J.E., Mischke, C.R., Budynas, R.G., Liu, X. and Gao, Z. (2004), Mechanical Engineering Design, Tutorial 4-17, The McGraw Hill, New York, NY, USA, pp. 1-11.
16 West System Inc. (2005), Fatigue, Technical Information, Catalog number , 000-545
17 Yavari, F., Rafiee, M.A., Rafee, J., Yu, Z.-Z. and Koratkar, N. (2010), "Dramatic increase in fatigue life in hierarchical graphene composites", ACS Appl. Mater. Interf., 2(10), 2738-2743.   DOI
18 Zhu, Z., Ahmad, I. and Mirmiran, A. (2009), "Fatigue modeling of concrete filled fiber reinforced polymer tubes", J. Compos. Construct., 13(6), 582-590.   DOI
19 American Society of Metals (1975), Failures of Shafts; Failure Analysis and Prevention, Metals Handbook, 10, 373-397.
20 Amiri, M. (2010), "Rapid determination of fatigue failure based on temperature evolution", Int. J. Fatigue, 32(2), 382-389.   DOI
21 ANSYS (2010), ANSYS Inc., Release 13.0 help.
22 ASTM E8 (2011), Standard Test Methods for Tension Testing of Metallic Materials; American Society for Testing of Materials, West Conshohocken, PA, USA.
23 ASTM D143 (1994), Standard Method of Testing Small Clear Specimens of Timber; American Society for Testing of Materials, West Conshohocken, PA, USA.