• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.11-17
• /
• 1993

Corundum single crystals were grown by the Czochralski technique. Relationships between crystal quality and crystal growth factors such as pulling rate, rotation rate and temperature of the melt were investigated. Optimum pulling and rotation rate for high quality corundum single crystal growth were 4.0mm/hr, 30rpm respectively. Pore was a main defect in corundum crystal and also discussed how to remove this defect by melt temperature control. Growth direction of as grown crystals was identified with(0001). And this direction had largest growth rate. Room temperature absorption spectra were measured and discussed for Cr3+ion doped and non-doped corundum crystals.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.5
• /
• pp.567-580
• /
• 1999

Accurate reproduction of intraoral tissue is essential in the fabrication of fixed prosthesis. This selection of impression material and method is very important. In this study, vinyl polysiloxane type impression material $Panasil^{(R)}$ was used. Three impression methods ; one-step technique, individual tray technique, and individual tooth tray technique using the vinyl polysiloxane type bite registration material $Futar^{(R)}$ Occlusion, were used to take horizontal and vertical impression. Improved stone models were fabricated. The amount of occlusal surface discrepaneies, interabutment distance discrepancies, amount of marginal defect were evaluated with the $X-PLAN360d^{(R)}$ and photoscanning. The results were as follows. 1. There was no significant difference in occlusal surface according to the directions and techniques of impression taking. 2. There was no significant difference in interabutment distance discrepancies according to the directions and techniques of impression taking 3. There was no significant difference in marginal discrepancies according to the direction of impression taking but there was significant difference between one-step technique and individual tray technique, individual tooth tray technique (P<0.05). Taken together, these results suggest that individual tray technique and individual tooth tray technique are more accurate for impression taking than one-step technique.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.107-113
• /
• 2017

Recently, digital signage is various changes and converging media. It is common to exhibit and guide focusing on information transfer by using the display. Such a method can not express variously changing digital signage. Therefore, we have to find a way to solve the problem of place and structure. In this paper, we experimented the new direction technique. Finally, we are going to propose acoustic direction technique using a microphone to maximize digital signage and intention of delivery by adding an sound reinforcement method to the visual representation.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.283-294
• /
• 2015

A model that precisely forecasts how much wind power is generated is critical for making decisions on power generation and infrastructure updates. Existing studies have estimated wind power from wind speed using forecasting models such as ANFIS, SMO, k-NN, and ANN. This study applies a projected clustering technique to identify wind power patterns of wind turbines; profiles the resulting characteristics; and defines hourly and daily power patterns using wind power data collected over a year-long period. A wind power pattern prediction stage uses a time interval feature that is essential for producing representative patterns through a projected clustering technique along with the existing temperature and wind direction from the classifier input. During this stage, this feature is applied to the wind speed, which is the most significant input of a forecasting model. As the test results show, nine hourly power patterns and seven daily power patterns are produced with respect to the Korean wind turbines used in this study. As a result of forecasting the hourly and daily power patterns using the temperature, wind direction, and time interval features for the wind speed, the ANFIS and SMO models show an excellent performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.133-140
• /
• 2005

This paper introduces a spatial error concealment technique using directional interpolation in block-based compression. The first step involves finding the spatial direction vectors represented an edge-direction in the lost block using spatial boundary matching algorithm. Then, the error blocks are recovered by directional interpolation through these vectors and concealed by using the recovered blocks which have lower directional boundary matching error out of them relatively. This proposed method is able to deal with errors on macroblock or slice level adaptively. And it has lower complexity and maintains better performance compared to the conventional methods.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.439-445
• /
• 2014

PURPOSE: This study was to investigate the effect of direction of gliding in the tibiofibular (TF) joint on angle of active ankle dorsiflexion (AADF). METHODS: Fifteen subjects with no medical history of lower extremities were recruited in this study. The digital dynamometer was used to maintain the same gliding force in each condition. The angle of AADF was measured by using the electronic goniometer. Subjects were instructed to perform the AADF in three trials during the each gliding in the TF joint by the examiner. The conditions were no gliding and four directions of gliding in the proximal (anterior-superior: A-S vs posterior-inferior: P-I) and distal (posterior-superior: P-S vs. anterior-inferior: A-I) TF joint. A repeated measured ANOVA was used to compare angle of the AADF in each TF joint. The paired-sample t tests with Bonferroni correction were used in order to Post hoc pair-wise comparisons. The significant level was set at 0.016 (0.05/3). RESULTS: In distal TF joint, the angle of AADF in the A-I direction of gliding was significantly lower than those in no gliding and P-S direction of gliding (p<0.01). In proximal TF joint, the angle of AADF was significantly lower than those in no gliding and A-S direction of gliding (p<0.01). Although there was no significant differences, angle of AADF were largest in the P-S direction of gliding among four conditions. CONCLUSION: These findings suggest that gliding technique of TF joint would be required to improve the angle of AADF in subjects with limitation of ankle dorsiflexion.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.244-247
• /
• 1999

This paper presents a methodology of the technique for controlling DC motor drive by implementation of 2-quadrant operating mode which can ensure the torque controlling and speed with response time less than 2 seconds at all loading conditions. By implementation of BRM technique, energy is fed with definite values of BRM 256 bits, with different patterns of high accuracy, and fixing scan time at 0.667 ms, the ripple is less than 1%, thus high efficiency can be achieved, from the consequence of the accuracy of energy feeding at low current. The stability of the whole system can be determined from circle criterion by root locus method . The instant reverse direction of rotation can be done by decreasing the energy to the lowest level while motor is running with no load and variable load at the speed about 100-120 rpm and 50-60 rpm.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.289-300
• /
• 1995

The conventionally used method requires centerline of vessels to estimate the vessel diameter. Two methods of estimating the centerline of vessels are reported : One is manually observer-defined method. This potentially contributes to inter-and intra-observer variability. And the other is to auto- matically detect the centerline of vessels. But this is very complicated method. In this paper, we propose a new method of estimating vessel diameter using direction codes and position informs:ion without detecting centerline. Since this method detects the vessel boundary and direction code at d same time, it simplifies the procedure and reduces execution time in estimating the vessel diameter. Compared to a method that automatically estimates the vessel diAmeter uslng centerline, our method provides improved accuracy in image with poor contrast, branching or obstructed vessels. Also, this provides a good compression of boundary description, because each direction code element can be coded with 3 bits only, instead of the 4 bytes required for the storage of the coordinates of each border pixel. Our experiments demonstrate the usefulness of the technique using direction code for quantitative analysis of coronary angiography Experimental results Justify the validity of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1629-1632
• /
• 2003

A technique is presented for generating a compound human motion from its primitive motions obtained by a motion capture system. Some human fundamental motions are modeled in a 3-D way and registered as primitive motions. Because the factorization method is used for the motion capture, calibration of video cameras and connection of the motion in the direction of time is both unnecessary. Employing these motions, various compound human motions are generated by connecting the motions after having applied rotation and parallel transformation to them. Linear interpolation is done at the discontinuous boundary between primitive motions and smooth connection is achieved. Experimental results show satisfactory performance of the proposed technique. The technique may contribute to producing various complicated human motions without much effort using a strict motion capture system.

• Journal of Fashion Business
• /
• v.11 no.3
• /
• pp.133-151
• /
• 2007

The role of fabric now directly related with the expression of the beauty of clothing and it provides new and creative ideas. This study was aimed at reviewing basic data that can be used in systematic design development through fabric expression for today's fashion designers who must study unique, original fashion design development. For systematic development of design technique through fabric expression, fabric expression methods and characteristics, aesthetic characteristics and fabric design of 'art to wear' were reviewed and the results are as follows. First, the highly wrought fabric expression of art to wear was confirmed to be comprehending a message within itself. Second, aesthetic characteristics of fabric expression used in art to wear can be classified as decorativeness, extensity, 2-D pictorialness, handicraft, compounding and rearrangement, and 3-D characteristics. Third, the 6 aesthetic characteristics have unique design features and aesthetic categories. The understanding the fabric expression techniques through study on the classification of the fabric expression in 'art to wear' is expected to be extended to proposition of creative direction and inspiration of modern fashion.