• 제목/요약/키워드: technical output

검색결과 485건 처리시간 0.025초

패턴 변환 루프 구조를 가지는 마이크로스트립 패치 안테나 (Pattern-Switchable Microstrip Patch Antenna with Loop Structure)

  • 김용진
    • 한국산학기술학회논문지
    • /
    • 제13권11호
    • /
    • pp.5447-5451
    • /
    • 2012
  • 본 논문은 마이크로스트립 패치 안테나에 루프구조를 추가하여 방사패턴의 변환이 가능한 안테나를 제안한다. 패턴 변환을 위한 루프 구조를 패치 안테나의 급전부와 연결하며, 스위치 on/off 에 따라서 안테나의 방사패턴이 가변되는 구조가 된다. 제안된 안테나의 동작주파수는 2.4GHz이며, 최대이득은 3.2dBi 이다. MIMO (Multi-Input Multi-Output), WLAN등의 무선통신 시스템에서 diversity나 스마트 안테나 시스템에 장착을 목적으로 한다. 제안된 안테나의 patch 사이즈는 $28mm{\times}28mm$이며, ground plane의 사이즈는 $40mm{\times}50mm$이다. 제안된 안테나는 2층의 적층 구조를 하고 있으며, 스위치 on/off 동작에 의해 안테나의 패턴이 가변됨을 시뮬레이션과 측정을 통하여 보였다.

수계별 소수력자원의 특성 (Characteristics of Small Hydro Power Resources for River System)

  • 박완순;이철형
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.193.1-193.1
    • /
    • 2010
  • Small hydropower resources for five major river systems have been studied. The model, which can predict flow duration characteristic of stream, was developed to analyze the variation of inflow caused from rainfall condition. And another model to predict hydrologic performance for small hydropower(SHP) plants is established. Monthly inflow data measured at Andong dam were analyzed. The predicted results from the developed models in this study showed that the data were in good agreement with measured results of long term inflow at Andong dam. It was found that the models developed in this study can be used to predict the available potential and technical potential of SHP sites effectively. Based on the models developed in this study, the hydrologic performance for small hydropower sites located in river systems have been analyzed. The results show that the hydrologic performance characteristics of SHP sites have some difference between the river systems. Especially, the specific design flowrate and specific output of SHP sites located on North Han river and Nakdong river systems have large difference compared with other river systems.

  • PDF

How Banks' Resources at the Retail Level Affect Their Output?

  • ALOTHMAN, Seham;AL-MAHISH, Mohammed
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권12호
    • /
    • pp.853-861
    • /
    • 2020
  • The study aims to measure the productivity of the Saudi banking sector at the retail level using secondary data for 11 local banks from the period 2015-2019. The study uses an extended version of the Cobb-Douglas production function to account for the fact that as banks openup more retail branches, they will need to employ more labor. The extended Cobb-Douglas production function was estimated using the two-way fixed effect model to account for unobserved heterogeneity across Saudi banks resulting from differences in labor competencies and leadership style. Besides, the model accounts for unobserved heterogeneity among Saudi banks due to the advancement in electronic services over time. The results showed that labor, branches, customers' deposits, and fixed deposits have a positive effect on the total value of generated loans. Conversely, ATM has an insignificant effect on generated loans. The average scale elasticity shows that the Saudi banks at the retail level are operating under decreasing returns to scale. The average marginal rate of technical substitution shows that Saudi banks need at least one ATM to replace one unit of labor at the retail level while keeping the same level of output.

An application of operational deflection shapes and spatial filtration for damage detection

  • Mendrok, Krzysztof;Wojcicki, Jeremi;Uhl, Tadeusz
    • Smart Structures and Systems
    • /
    • 제16권6호
    • /
    • pp.1049-1068
    • /
    • 2015
  • In the paper, the authors propose the application of operational deflection shapes (ODS) for the detection of structural changes in technical objects. The ODS matrix is used to formulate the spatial filter that is further used for damage detection as a classical modal filter (Meirovitch and Baruh 1982, Zhang et al. 1990). The advantage of the approach lies in the fact that no modal analysis is required, even on the reference spatial filter formulation and other components apart from structural ones can be filtered (e.g. harmonics of rotational velocity). The proposed methodology was tested experimentally on a laboratory stand, a frame-like structure, excited from two sources: an impact hammer, which provided a wide-band excitation of all modes, and an electro-dynamic shaker, which simulated a harmonic component in the output spectra. The damage detection capabilities of the proposed method were tested by changing the structural properties of the model and comparing the results with the original ones. The quantitative assessment of damage was performed by employing a damage index (DI) calculation. Comparison of the output of the ODS filter and the classical modal filter is also presented and analyzed in the paper. The closing section of the paper describes the verification of the method on a real structure - a road viaduct.

러너와 가이드 베인의 연동을 통한 마이크로 카프란 수차의 출력 최적화 (Output Optimization of Microhydro Kaplan Turbine by Double Regulating Runner and Guide Vane)

  • 박노현;이영우
    • 한국유체기계학회 논문집
    • /
    • 제16권1호
    • /
    • pp.17-23
    • /
    • 2013
  • Recently so much attention has been focused on renewable energy and, since its sources to exploit are already almost saturated in the country, the practical alternative to this situation could be a micro-turbine which uses the low head and low flow. From a point of view of local micro-turbine design capacity and manufacturing technology, the problems such as the accumulation of technical skills, the expansion of related industries, the national policy expansion and the turbine efficiency to improve are still vulnerable and it's true that there are also negative views about the economic feasibility, the technicity and the operation management of the micro-turbine. However, if the improvement can be done in technology of low-head double regulation micro-turbine to generate more outputs and the operation management can be reliably realized, the micro-turbine will be re-evaluated as an appliable source of renewable energy, even the output is small, and by a paradigm shift, it could realize a power generation as an economic and rational system.

CFD를 활용한 6 MW 해상풍력발전단지의 풍력터빈 이격거리에 따른 공기역학적 출력 변화연구 (CFD Study on Aerodynamic Power Output of 6 MW Offshore Wind Farm According to the Wind Turbine Separation Distance)

  • 최낙준;남상현;정종현;김경천
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권8호
    • /
    • pp.1063-1069
    • /
    • 2011
  • 본 논문은 2 MW급 풍력터빈 3기로 구성된 6 MW 해상풍력발전단지의 풍력터빈 이격거리에 따른 공기역학적 출력 변화를 전산유동해석을 활용하여 연구한 것이다. 육상 뿐만 아니라 해상풍력발전단지에 있어서 레이아웃 설계는 풍력발전단지 초기 투자비, 년간 발전량 및 유지보수비에 영향을 끼치는 핵심 인자이다. 각 풍력터빈 로터에 대해서 모멘텀 소스를 가지는 액츄에이터 디스크가 아닌 완전한 3-D 모델에 대해서 전산유동해석 기법을 적용하여 연구하였으며 이는 기술적으로 큰 의미를 가진다. 본 논문의 연구결과는 향후 해상풍력발전단지 레이아웃 설계에 유용하게 적용될 수 있을 것이다.

완도해역의 조류에너지 자원에 관한 연구 (A Study on Tidal Current Energy in the Sea near Wando)

  • 양창조
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제35권1호
    • /
    • pp.126-132
    • /
    • 2011
  • 최근 기후변화를 초래하는 화석연료의 사용을 감축하는 세계적 추세와 함께 유엔기후협약으로 인한 에너지의 안정적 공급을 위해 많은 노력이 요구되고 있다. 따라서 조류에너지와 같은 해양자원의 이용이 주목을 받고 있으며, 이러한 조류자원은 집중된 중력에너지 형태로 존재하며, 이러한 조류에너지는 매우 크지만 제한된 지역에 분포하고 있으므로 조류에너지를 효과적으로 이용하기 위해서는 반드시 기술적, 경제적인 측면의 평가가 요구된다. 이를 위해 본 연구에서는 완도해역에서의 조류에너지를 평가하기 위해 수심, 조석, 조류 등을 조사하고, 관측 자료를 바탕으로 완도 해역의 부존 조류에너지를 추산하고, 이용 가능한 연평균 에너지를 계산하였다.

Intense Pulsed Light의 안전성 및 성능평가를 위한 시험 항목 및 시험방법(안) 연구 (Guideline Development to Evaluate the Safety and Performance of Intense Pulsed Light(IPL))

  • 강동연;손태윤;주예일;최응호;정병조
    • 대한의용생체공학회:의공학회지
    • /
    • 제31권2호
    • /
    • pp.129-133
    • /
    • 2010
  • Intense pulsed light(IPL) is a photo-therapeutic medical device using xenon lamps with optical characteristics of incoherence, defocusing, and polychromatic. IPL has been recognized as a representative medical therapeutic device with growth of domestic skin care market. However, there is no standard regulation manual and guideline to evaluate the safety and performance of IPL. International Electrotechnical Commission(IEC) is being statued "Technical Report IEC TR 60825-16" which is a guidelines for the safe use of intense light source equipment on humans and animals. In this study, a standard Korea Food & Drug Administration (KFDA) regulation for the safety and performance of IPL was suggested by developing minimal evaluation methods for optical parameters of IPL such as output energy density, pulse mode, spot size, wavelength and uniformity of output light. We expect that this study may be a step to statue a standard regulation manual and guideline for IPLs used in domestic.

Technological Experience and Crop Production in Dryland Farming Systems in Africa : The Case of Draught Animal Power in Ghana

  • Panin, Anthony
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.591-600
    • /
    • 1993
  • Considerable controversy exists about the trend of animal traction effects on crop production in dryland farming systems in sub-Saharan Africa (SSA). This problem arises on account of the failure of the few available empirical studies to recognise the important of technological experience of the individual adopting farmers. This study hence addresses this issue by examining the effects of experience in animal traction technology (ATT) on farm size, cropping emphasis, total crop output and farm productivity. It is based on farm management survey data on 42 small holder farm households fro Ghana. Thirty of these households used animal traction technology (ATT) fro crop cultivation and the rest, mainly hand-hoe. The animal traction sub-sample is classified into three groups according to farmers' years of experience with the technology , thus , those with 1-2, 3-10, and more than 10. Evidence from the study shows that the progression of years of experience with ATT leads to inten ification of labour and land use systems, enhancement of degree of motivation to enter into the market economy, increases in total crop output and farm productivity resulting for decreases in cultivated acreages. The implication of the findings is that institutioal and technical support that do accompany the introduction of such technologies should be structured to last for a relatively longer period to accomodate the learning process.

  • PDF

2차원 마찰모델을 이용한 구면무단변속기의 변속특성해석 (Analysis on the Shift Characteristics of Semi-Spherical CVT using 2-dimensional Friction Model)

  • 공진형;임원식;박영일;김정윤
    • 한국자동차공학회논문집
    • /
    • 제16권4호
    • /
    • pp.103-109
    • /
    • 2008
  • Semi-spherical CVT(SS-CVT) is one of friction drives, which transmits power via the friction force between a spherical shaped variator and output disks. The variator varies the speed ratio of SS-CVT continuously as well as transmits input power into the output shaft. Therefore two friction forces are normally applied on the variator; one is the longitudinal friction force for power transmission and the other is the lateral for shifting. In order to investigate the dynamic behavior of SS-CVT, we introduced a numerical model of 2-dimensional friction force using a function of slip ratio and slip angle. And a dynamic model, which describes the shifting mechanism of SS-CVT, is developed through 3-dimensional vector analysis. Finally we presented numerical results of the shift characteristics focused on the transient behavior of the variator's slip ratio and slip angle. The numerical results also show the typical CVT shifting characteristics of SS-CVT and stable shifting behaviors of the variator.