• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.169-185
• /
• 2022

This study analyzed the effect of entrepreneurial competency on entrepreneurial intentions by using the entrepreneurial opportunity recognition as a mediator for middle and middle-aged office workers. The sub-variables of entrepreneurial competency are classified into management competency, technology competency, business competency and funding competency. 222 copies of questionnaires collected from middle-aged and elderly office workers residing across the country centered on the metropolitan area were used for empirical analysis. Based on a simple mediating model with singular mediator using SPSS v22.0 and PROCESS macro v4.0. was analyzed. As a result of the analysis, first, among entrepreneurial competencies, business competency and funding capacity were found to have a positive (+) significant effect on the entrepreneurial intentions, but management and technical competency did not have a significant effect. The higher the business competency and funding competency. Second, it was found that all of the sub-variables of entrepreneurial competency had a significant effect in the positive (+) direction on the recognition of entrepreneurial opportunities. It was confirmed that management competency has the greatest influence on the entrepreneurial opportunity recognition and technology competence has the smallest effect. Third, it was found that the entrepreneurial opportunity recognition had a significant effect on entrepreneurial intentions. The discovery of an opportunity recognizing opportunities for start-up is a prerequisite for entrepreneur. Fourth, it was found that the entrepreneurial opportunity recognition mediates between the management competency, technological competency, business competency, funding competency, and entrepreneurial intention. It suggests that opportunity discovery by recognizing opportunities for entrepreneurship is a prerequisite for start-up. As implications of this study, it suggests that in order to inspire middle-aged and elderly office workers to start their own business, it is necessary to have indirect experience with education and to establish and promote a government support system for financing.. Second, It suggests that education on leadership and organizational management is particularly necessary to strengthen the opportunity recognition. Third, it suggests that the discovery of opportunities to recognize opportunities for start-up is a prerequisite for entrepreneur. Therefore, it is necessary to prepare a manual and conduct training on opportunity search, recognition, evaluation, and utilization according to the stage of opportunity development. Fourth, it suggests that in order to strengthen the intention to start a business, ALso, it is necessary to manage both the entrepreneurial competency and entrepreneurial opportunities recognition at the same time. By presenting the practical directions that can be given differentially, we intend to contribute to the provision of practical directions and policy establishment for the promotion of entrepreneurial activities of office workers who can give vitality to the ecosystem.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.8
• /
• pp.287-296
• /
• 2018

In the recent commercial DBMS market, as the users' burden and complaint which are related to high price licensing policy and late technical support service are increasingly rising, the concern for use of open source DBMS which has no problem with compatibility or stability is escalating. Due to the fact, the cases saving the cost are growing by converting Oracle Corporation's applications, which has about 60% share in the DBMS market, to an open source DBMS. However, in converting non-interchange sentences to an ANSI standard-based open source DBMS because of the use of PL/SQL in Oracle Corporation provides, a lot of manual work accompanies, so there is a lot of loss of time and money. Therefore, a tool that automatically converts PL/SQL to standard SQL is required. The proposed automation tool for the conversion of applications converts PL/SQL to Java Stored Procedure, an open source DBMS-based ANSI standard programming language. Through carrying out a test on the automation tool, it is proved that the tool will contribute to shortening time and saving cost by verifying the identity of input-output data and its reliability after correcting errors in converting to Java Stored Procedure.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.121-128
• /
• 2006

In this study, the existing MSS facilities were investigated for examination the the present condition of MSS treatment system. There are 23 MSS treatment facilities across the country, In total facilities, 6 facilities have economical problems, and 2 facilities were stopped the operation of establishments for technical problems, and most facilities are suffering from environmental problems, for example, odor and waste water. These kinds of problems play a role as obstacle to treat MSS efficiently. Accordingly, to reform current MSS treatment system, a few adequate measures are required. First a Guide line, which is a manual for establishment of MSS treatment facilities efficiently and environmentally friendly, must be offered from the agencies concerned of the Ministry of Environment to local governments. Second, to devise a plan for MSS treatment, Ministry of Environment and all local governments should devise a long-range policy synthetically not fragmentarily and temporarily.

• Korean Journal of Cognitive Science
• /
• v.26 no.2
• /
• pp.167-207
• /
• 2015

This study focused on the awareness and coping methods of psychological trauma and human suffering in the contemporary era after the development of posttraumatic stress disorder(PTSD) including the situations in the Korean society, and proposed principles for an alternative paradigm of trauma recovery. Trauma is defined as an 'external' stress causing chronic suffering mediated by memory, and the American Psychiatric Association approved PTSD in the Diagnostic and Statistical Manual of Mental Disorders in 1980. The development of PTSD empowered moral legitimacy to the victims, opened a successful way to treatment, and accomplished explosive amount of research in the area of neurobiology and cognitive neuroscience. However, this also narrowed the understanding of human suffering, and the importance of an alternative coping method which overcomes the limitations of technical intervention became overlooked. Moreover, the Korean society has an underlying mechanism of replacing the matter of trauma to a problem of an individual. This is shown among the historical context of splitting and denial, and among medicalized bureaucracy. Trauma should be acknowledged as a social suffering, and searching for an alternative paradigm is in need. This study suggested the following principles; seeking for truth and justice, survivor as the agent of recovery emphasizing the responsibility of the community, ecological adaptations of recent bio-psychological achievements, and finally putting emphasis on continuous discussions about the definition of recovery.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.16-21
• /
• 2012

Recently, an importance of culture industry has been emphasized through an increased income level, spare time and changed values of modern people. And demands of the performance, arts, exhibit are steadily being increased. However the stage equipment depends on foreign manufactures on account of the inactive domestic technical skills. Especially in the lighting direction part, it is essential to control the lighting source and detect the moving line of actors but it generally uses the manual control type and realization of actor's moving line regardless of existing IT-based technologies. Also the system operation of existing sensor-based tracking and detecting technologies depends on the main lighting source of the stage. Therefore, this paper proposed LED lighting control system using the variable FOV and multi sensor-based tracking algorithm, which are possible to efficiently track the stage actors and direct the stage lights. Also we demonstrated the practicality and possibility of realization through the integrated experiment of the proposed system and implementation of the salient hardware, software. Additionally, the usefulness of proposed system was demonstrated using performance simulations and actual measurements of implemented sensor output.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.125-140
• /
• 2018

As one of the processes in the manufacturing industry, quality inspection inspects the intermediate products or final products to separate the good-quality goods that meet the quality management standard and the defective goods that do not. The manual inspection of quality in a mass production system may result in low consistency and efficiency. Therefore, the quality inspection of mass-produced products involves automatic checking and classifying by the machines in many processes. Although there are many preceding studies on improving or optimizing the process using the data generated in the production process, there have been many constraints with regard to actual implementation due to the technical limitations of processing a large volume of data in real time. The recent research studies on big data have improved the data processing technology and enabled collecting, processing, and analyzing process data in real time. This paper aims to propose the process and details of applying big data for quality inspection and examine the applicability of the proposed method to the dairy industry. We review the previous studies and propose a big data analysis procedure that is applicable to the manufacturing sector. To assess the feasibility of the proposed method, we applied two methods to one of the quality inspection processes in the dairy industry: convolutional neural network and random forest. We collected, processed, and analyzed the images of caps and straws in real time, and then determined whether the products were defective or not. The result confirmed that there was a drastic increase in classification accuracy compared to the quality inspection performed in the past.

• The KIPS Transactions:PartA
• /
• v.18A no.3
• /
• pp.81-92
• /
• 2011

There has been a number of attempts to apply 3D CAD data created in the design stage of product life cycle to various applications of the other stages in related industries. But, 3D CAD data requires a large amount of computing resources for data processing, and it is not suitable for post applications such as distributed collaboration, marketing tool, or Interactive Electronic Technical Manual because of the design information security problem and the license cost. Therefore, various lightweight visualization formats and application systems have been suggested to overcome these problems. However, most of these lightweight formats are dependent on the companies or organizations which suggested them and cannot be shared with each other. In addition, product structure information is not represented along with the product geometric information. In this paper, we define a dataset called prod-X3D(Enhanced X3D Dataset for Web-based Visualization of 3D CAD Product Model) based on the international standard graphic format, X3D, which can represent the structure information as well as the geometry information of a product, and propose a translation method from 3D CAD data to an prod-X3D.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.69-78
• /
• 2004

Since 1995, One of the NGIS(National Geographic Information System) projects, the underground utilities project, has been finished in 2003. The 19 cities in korea for this project will use underground utilities management system using underground utilities database focusing on water and sewage system. However, special expert, technical and experience problem in computer environment has not been had in working department for water and sewage management and maintenance for each local government. The management and maintenance by underground utilities database by manual method is getting lowered a data qualify of underground utilities database because of the data omitting, error in writing and securing of the lasted database. Therefore, in this study, Application test for field workers using a mobile tool and environment analysis of wireless communication in Korea and application test of GPS receiver for mobile tools had been processed and made a mobile working environment. The efficient management and maintenance method for underground utilities database has been developed an off-line method for modification and update of database about general work which has a high working frequency because of the limitation of wireless communication environment. Also, the emergency working has been applied for on-line method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.399-406
• /
• 2020

The R.O.K Army has developed and operated TM to maintain the operation of weapons systems since its establishment. As more modern weapons systems were developed, the more efficient operation was limited by a large quantity. As a countermeasure, the DAPA has operated the IETM using the KAIS TOOL since 2003. However, 16 years later, they were shunned by operators for software instability and other reasons. Based on the results of an operational test and evaluation team of the Army headquarters, the analysis results of software instability, limited compatibility and integration, limited real-time updates, etc. were analyzed. It was confirmed that KAIS development tools were urgently needed. Therefore, in order to solve this current problem for the Army IETM, the first phase of this paper focused on improving the IETM by maintaining the application present, the second of the Army Electronic Technology manual, phase going to propose improvement plans for operational test and evaluation by lining 11 elements of comprehensive logistics support with an electronic technology code.