• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.2
• /
• pp.167-174
• /
• 1989

AS a part of investigation to use anchovy more effectively as food source, this work was undertaken the processing conditions of extracts from rapid fermented anchovy sauce. To prepare rapid fermented products, the chopped anchovy was mixed with 50% water (w/w), and then hydrolyzed by autolysis or addition of koji under different conditions of hydrolysis. The optimal conditions for hydrolysis of chopped anchovy were revealed $50^{\circ}C$, 6 hours, pH 8.0 by autolysis, and ,$50^{\circ}C$, 6 hours, pH 7.0 by addition of 10% koji, respectively. But, pH control was not much beneficial in increasing yield. The effect of soybean protein isolote for improvement of bitter taste was also tested. The reasonable amount of added soybean protein isolate was revealed 5% on the weight basis of the chopped anchovy. The reaction mixture hydrolyzed under optimal conditions were added with 1% onion powder (w/w), 1% garlic powder(w/w) and 1% red pepper powder(w/w) for masking fishy odor, inactivated for 20 min at $100^{\circ}C$, and then centrifuged for 20 min at 4,000 rpm. The supernatant liquor was filtrated and evaporated to 50%(v/v). finally, table salt was added for bateriostatic effect and characteristic taste of rapid fermented products. the reasonable amount of added table salt was reversed 15% on the volume basis of the evaporated liquor. The hydrolysis ratio of product made by addition of water, product made by addition of koji and water, and product made by addition of soybean protein isolate, koji and water hydrolyzed under optimal conditions were 58.4%, 82.1% and 86.2%, respectively.

• Information Systems Review
• /
• v.8 no.3
• /
• pp.39-64
• /
• 2006

In the global economy, e-business has increasingly become a strong catalyst for company growth and an essential activity of business innovation. It would be meaningful to provide comprehensive research about the success factor of e-business to facilitate its continuous growth and set up its future strategic direction in global e-business circumstances. There is limited research focusing on what are the major success factors of e-business. In this paper, we first attempt to identify the major e-business success factors in terms of management and technical aspects, according to the literature review, case study, and interview. Secondly, this research carries out an empirical investigation of the success factors closely associated to the e-business. Thirdly, this study examines the relationship between the success factor and performance of e-business. Finally, on the basis of the research results, this paper highlights e-business strategic vision which should be critically considered as an organization adopts and implements e-business.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.409-416
• /
• 2011

A mobile emission laboratory (MEL) was designed to measure the amount of traffic pollutants with high temporal and spatial resolution under real conditions. Equipment for gas-phase measurements of quantity of CO, NOx, $CO_2$, and THC and for the measurement of the number density and size distribution of fine and ultra-fine particles by a FMPS and a CPC were placed in a mini-van. The exhaust of different type of vehicles can be sampled by MEL. This paper describes the construction and technical details of the MEL and presents data from the experiment in which a car chases city buses fuelled by diesel, CNG, and LPG. The diameters of most particles in the exhaust of the diesel city bus were less than 300 nm and most of the particles had a diameter of 30-60 nm. However, most particles in the exhaust of the CNG and LPG city buses were nanoparticles (diameter: less than 50 nm).

• Wind and Structures
• /
• v.31 no.2
• /
• pp.143-152
• /
• 2020

The wind design of buildings is typically based on strength provisions under ultimate loads. This is unlike the ductility-based approach used in seismic design, which allows inelastic actions to take place in the structure under extreme seismic events. This research investigates the application of a similar concept in wind engineering. In seismic design, the elastic forces resulting from an extreme event of high return period are reduced by a load reduction factor chosen by the designer and accordingly a certain ductility capacity needs to be achieved by the structure. Two reasons have triggered the investigation of this ductility-based concept under wind loads. Firstly, there is a trend in the design codes to increase the return period used in wind design approaching the large return period used in seismic design. Secondly, the structure always possesses a certain level of ductility that the wind design does not benefit from. Many technical issues arise when applying a ductility-based approach under wind loads. The use of reduced design loads will lead to the design of a more flexible structure with larger natural periods. While this might be beneficial for seismic response, it is not necessarily the case for the wind response, where increasing the flexibility is expected to increase the fluctuating response. This particular issue is examined by considering a case study of a sixty-five-story high-rise building previously tested at the Boundary Layer Wind Tunnel Laboratory at the University of Western Ontario using a pressure model. A three-dimensional finite element model is developed for the building. The wind pressures from the tested rigid model are applied to the finite element model and a time history dynamic analysis is conducted. The time history variation of the straining actions on various structure elements of the building are evaluated and decomposed into mean, background and fluctuating components. A reduction factor is applied to the fluctuating components and a modified time history response of the straining actions is calculated. The building components are redesigned under this set of reduced straining actions and its fundamental period is then evaluated. A new set of loads is calculated based on the modified period and is compared to the set of loads associated with the original structure. This is followed by non-linear static pushover analysis conducted individually on each shear wall module after redesigning these walls. The ductility demand of shear walls with reduced cross sections is assessed to justify the application of the load reduction factor "R".

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.623-635
• /
• 2018

In order to study the mechanical behavior of shield tunnel segments during assembly stage, the in-situ tests and FDM numerical simulation were conducted based on the Foguan Shiziyang Tunnel with large cross-section. Analysis for the load state of the assembling segments in different assembly steps as well as the investigation for the changing of inner forces and longitudinal stress of segments with assembling steps were carried out in this paper. By comparing the tested results with the simulated results, the conclusions and suggestions could be drawn as follows: (1) It is the most significant for the effects on axial force and bending moment caused by the assembly of adjacent segment, followed by the insertion of key segment while the effects in the other assembly steps are relative smaller. With the increasing value of axial force, the negative bending moment turns into positive and remains increasing in most monitored sections, while the bending moment of segment B1and B6 are negative and keeping increasing; (2) The closer the monitored section to the adjacent segments or the key segment, the more significant the internal forces response, and the monitored effects of key segment insertion are more obvious than that of calculation; (3) The axial forces are all in compression during assembling and the monitored values are about 1.5~1.75 times larger than the calculated values, and the monitored values of bending moment are about 2 times the numerical calculation. The bending moment is more sensitive to the segments assembly process compared with axial force, and it will result in the large bending moment of segments during assembling when the construction parameters are not suitable or the assembly error is too large. However, the internal forces in assembly stage are less than those in normal service stage; (4) The distribution of longitudinal stress has strong influence on the changing of the internal forces. The segment side surface and intrados in the middle of two adjacent jacks are the crack-sensitive positions in the early assembly stage, and subsequently segment corners far away from the jacks become the crack-sensitive parts either.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.737-742
• /
• 2000

As functionality investigation of a soybean fermentation food, a angiotensin converting enzyme inhibitory peptide was separated during natto fermentation by Bacillus natto and inhibitory effect was investigated. After incubation at each 2$0^{\circ}C$, 3$0^{\circ}C$, 4$0^{\circ}C$, 5$0^{\circ}C$, 6$0^{\circ}C$ for the 0~72 hr, protein content, protease activity and angiotensin converting enzyme inhibition were determined. The protein content and protease activity were increased and reached maximum at 60 hr fermentation with 4$0^{\circ}C$ and decreased after the 60 hr fermentation during natto fermentation. The optimum condition for angiotensin converting enzyme inhibitors was appeared at fermentation for 60 hr at 4$0^{\circ}C$. Crude extract of natto was partially purified by Amicon membrane YM-3 and Sephadex G-10, G-25 gel filtration, stepwise. The inhibitory rate was increased in a concentration dependent manner, espcially the most potent activity about 74.74% at 1.0 mg peptide content. The most prominent amino acid of the peptide from natto was alanine, followed by phenylalnine, histidine.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.430-457
• /
• 2017

The purpose of this study is to present meaningful information and policy implications concerning the determinants of royalties of technology transfer to stakeholder. To identify key determinants of royalties in technology transfer, this study conducted AHP survey analysis (Survey period: 01/09~31/10, 2016) of 96 government-funded research centers and 85 companies which were participants of the R&D project "Next Generation BioGreen21" of R.D.A in the "N" center from 2011 to 2015. Research results show that both parties acknowledge 'Technical considerations for determining the profitability of the technologies' and 'The interest and willingness of the management group' as critical factors for the determinants of royalties. The difference of each party is that private companies acknowledge 'Available budget plan' as a critical factor while the government-funded research centers value 'Market competitiveness'. These findings suggest four main policy implications which are the investigation of technological demands reflecting specific needs of industrial sites, the diversification of royalty payments for private companies, the differentiated research evaluation system for the purpose of technology transfer and the planning of public R&D project reflecting research time span of private companies.

• Korean Journal of Food Science and Technology
• /
• v.21 no.3
• /
• pp.435-440
• /
• 1989

The present study was attempted to investigate the mutagenicities of carbonyl compounds(methyl glyoxal, glyoxal, diacetyl, dihydroxyacetone, glycolaldehyde, glyceraldehyde and furfural) derived from Maillard reaction toward Salmonella typhimurium TA 100(base-substitution mutant) without metabolic activation . And for further Investigation of mutagenicity mechanism including desmutagenicity, active oxygen scavengers (cysteine, ${\alpha}-tocopherol$, tris (hydroxymethyl) aminomethane, catalase, ascorbic acid) and reducing agents (glutathione, sodium bisulfite) were also used. Among carbonyl compounds tested, methyl glyoxal, glyoxal, dihydroxyacetone, glycolaldehyde and glyceraldehyde exhibited mutagenicities, and methyl glyoxal showed the strongest mutagenic activity. On the other hand , the mutagenicities of carbonyl compounds were significantly suppressed by cysteine, tris (hydroxymethyl) aminomethane, glutathione and sodium bisulfite. Also, these active oxygen scavengers and reducing agents alone did not show mutagenicity in the present study.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.435-441
• /
• 2008

In this paper, we investigated the electrical properties of triisopropylsilyl (TIPS) pentacene organic thin-film transistor (OTFT) depending on solvent type. We spin coated TIPS pentacene by using chlorobenzene, p-xylene, chloroform, and toluene as solvents. Fabricated OTFT with chlorobenzene shows field-effect mobility of $1.0{\times}10^{-2}cm^2/V{\cdot}s$, on/off ratio of $4.3{\times}10^3$ and threshold voltage of 5.5 V. In contrast, with chloroform, the mobility is $5.8{\times}10^{-7}cm^2/V{\cdot}s$, on/off ratio of $1.1{\times}10^2$ and threshold voltage of 1.7 V. Moreover we measured the grain size of each TIPS pentacene solvent by atomic force microscopy (AFM). From these results, it can be concluded that a solvent with higher boiling point results in better electrical characteristics due to large grain size and high crystallinity of TIPS pentacene layer. In this paper TIPS pentacene with chlorobenzene shows the best electrical properties.

• Smart Media Journal
• /
• v.9 no.1
• /
• pp.75-83
• /
• 2020

Compensation services that are indispensable during large-scale public utilities projects have been gradually increasing with the recent increase in construction, but there are no systematic compensation services due to the complicated procedures and manual work. For this reason, various problems such as construction period delays due to various complaints, corruption in compensation work, and impossible to trace the history of compensation data in the past are emerging. In this paper, in order to solve this problem, in-depth interviews and questionnaires were conducted to find out the problems of each compensation status. Based on this, 3 core technologies and 10 technical needs based on ICT were selected to improve the compensation work by deriving STEEP analysis and Issue Tree. The three core technologies are big data-based decision-making and prediction technology, advanced measurement technology, and open cloud-based compensation platform technology. In order to introduce the derived technologies to the institutions in charge of compensation, the possibility of technology diffusion by project operators was suggested based on the results of the current status of informatization by institution. Based on the core technology derived from this paper, it is necessary to make a prototype that can be advanced in compensation work and apply it to each institution and analyze the effect.