• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.48-74
• /
• 1995

Since heat curing acrylic resins undergo unavoidable dimensional changes following polymerization, adaptation can be altered. Until recently, although numerous studies on the dimensional changes of denture base were based on a microscopic technic that measures the relative displacement of a limited reference points on the denture base, but there have been few studies on the distortions of resins using holographic interferometry. Purpose of this study was to determine and compare the dimensional changes and fringe patterns of 4 heat curing acrylic resins, and observe the distortions of acrylic resin denture base by temperature change with the aid of the holographic interferometry. Holographic interferograms were taken on the resin specimens and acrylic resin denture base with the 10mW He-Ne laser and double exposure method. Comparison and analysis of fringe pattern on the recorded object surface was performed. The following results were obtained. 1. The dimensional changes for the high impact resin Lucitone 199 were statistically the greatest of all resins, and the rapid heat curing resin Premium super 20 were the least. 2. The most polymerization shrinkage of all materials occured in initial period of measurements, at this time the difference of polymerization shrinkage properties between resins was founded. 3. The stress distribution of specimens was seen by various type of fringe pattern which had directionality. 4. The polymerization shrinkage of resins was greatly influenced by temperature change. 5. The partial deformations of resin denture base were observed in 70 C and 90 C water.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.525-532
• /
• 1998

The autism is a complex disorder, characterized language impairment, perceptual-motor difficulties, and social disturbance. The autistic children have hyperactivity, lack of communication' lack of cooperation, inappropriate patient/dentist interaction, so they require professionally recognized behavioral management technique during dental treatment such as behavior modification, phamacological agents, and general anesthesia. A behavior management technique can be chosen by factors such as the severity of autism and possible accompanying disabilities, degree of cooperation, oral and general conditions of children. A non-pharmacological behavior modification may be selected for the autistic children who are able to communicate with dentist with mild dental caries, without compromised medical history. In case of excessively hyperactive, destructive, antisocial, and/or severe communicative disorder, a sedation technic with chloral hydrate, hydroxyzine, midazolam or nitrous oxide gas might to be performed. General anesthesia is preferred for severe communicative and/or behavioral disorder, elder age, excessive dental care need, and living a remote area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2878-2884
• /
• 2014

The Smishing attacks are caused using smartphone since 2013. Smishing hacking attacks are increasing due to the approximately 104 million private information leakage incidents by the 3 domestic credit card companies occurred in January 2014. The Smishing attack occurred in conjunction with hacking illegal leakage of personal information and direct financial damage. In this paper, i am analyze real-world case studies in the lab and study accident on Smishing Mobile Forensic analysis. I am study of a real case Smishing hacking attacks. And studying evidence for a Mobile Forensic analysis of the technical principles of Smishing attacks. The study for the Mobile Forensic evidence proved the Smishing hacking attacks using Mobile Forensic technic and create Mobile Forensic reports. Through this paper, the research will be safe for the people living in the smartphone can be used safely and conveniently, with the development of Mobile Forensic technology, to study the extraction of Smishing accident evidences from the court.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.471-478
• /
• 2000

For many decades, the railway was constructed using tracks with jointed rails of relatively short lengths. The joints cause many drawbacks in the track and lead to signeficant maintenance cost. so, railroad engineers became interested in eliminating joints. Continuous welded rail(CWR) track has many advantages over the conventional jointed-rail track. but, in the case of the elimination of rail joints, it may cause the track to be suddenly buckled laterally by thermal loads. In this paper, firstly, 3-D CWR track model and CWRB program exactly considering the influence of tie are developed far linear static and buckling analysis using finite element method. Characteristics of CWR track model are using 7-dofs beam element as rail, Offset technic exactly considering centroid axies difference of track components(rail, rail-pad-fastener, tie), and Thermal gradient considering thermal difference of top flange and bottom flange in rail section.. second,, Through the static and linear buckling analysis by CWRB, Influences of various track components (rail, ballast, fastener, tie and so on..) on CWR track behavior and stability was characterized.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.38-46
• /
• 1998

Management of children who show negative response to treatment was difficult. Usually the dentist used the restraintor sedatives for these children. Especially it is very difficult to management of definitely negative behavior patients who resist to ordinary sedative technics including psychosedation and various sedatives. These patients were managed with general anesthesia. Midazolam was used for sedation of non-cooperative pediatric patients and halothane for induce initial sleepness, If the patient shows negative response to management after 15 minutes of midazolam administration, used the halothane in 30 to 120 seconds for calm down the patient. After induce sleepness, cut off the halothane administration and maintain the sedation with $N_2O$ in 50-70 vol.% concentration. This technic reduce the toxity and untoward effects of major anesthetics. To compare the difference of sedation effect by dosage, dose of 0.2mg/kg and 0.3mg/kg were injected respectively. Though there's no statistical difference in duration and results between two dosage but show the increment of score with age, If the patients show positive response to management after midazolam administered. try to conscious sedation with nitrous oxide in 30 to 70 vo.% concentration. Nitrous oxide concentration was administered slowly according to their consciousness and response to treatment by increment or decrement. The success rate of conscious sedation were 21.2% in 0.2mg/kg and 30.3% in 0.3mg/kg. There's many factors in proceed of conscious sedation. The most important factors are age of patient and experience of children for dental care.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.187-194
• /
• 2009

This study is to improve position accuracy by selecting proper a servo motor and applying FOC(Field Oriented Control) on developing a 3D terrestrial laser scanner. A 3D terrestrial laser scanner under developing has range of scanning of azimuth 360$^\circ$and elevation 270$^\circ$. It is implemented by precise controlling of a azimuth motor and a elevation motor. In the consequence of study, we have known that position accuracy of the motor can be able to be improved with constant torque of the motor by using FOC(Field Oriented Control). The control technic of the motor is possible to apply a 3D terrestrial laser scanner as well as a robotic total station.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.63-69
• /
• 2008

It has an important meaning that the maintenance and management of facility for a onshore construction shall be damaged by oceanic environment. A movement and displacement of these shall be investigated by up-to-date machinery tools like GPS and Lidar and MBES & Gyro. In current a lot of tools and methods for investigation shall be used as a displacement and movement on land mainly. For underwater facility it is very difficult to check because of special conditions below the water surface. In this study, a surveying methods for a movement and displacement of underwater facility as caisson shall be used, i.e. multibeam-echo-sounding system. A possibility as basic data for displacement and environmental monitoring shall be studied by MBES to acquire a caisson's inclination.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.18-24
• /
• 2017

The process of transmitting messages through a medium with a limited bandwidth or channel dispersion inevitably involves signal distortion and noise influxes, resulting in the degradation of transmission quality due to the inter-symbol interference and additional noise, which increases the error rate of the received symbols. The main role of the equalizer is to remove the channel distortion and noise from the received signal to recover the transmitted messages. A number of studies on the equalizer composed of a combination of linear filter and error control coding have shown that they played a key role in enhancing the transmission efficiency, which is essential for digital communication. This paper proposes a new algorithm to correct the residual symbol errors in the message signal. In general, equalizer performance improvement algorithms were developed to improve the initial convergence speed or steady-state error. In this paper, however, the equalizer input signal was reconstructed using the equalizer decision symbols and the channel estimates to directly correct the decision errors by analyzing the statistical characteristics of the difference signal between the actual received signal and the reconstructed signal.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.26-32
• /
• 2014

CCS(Carbon Capture and Storage) which is technic to capture and storage the carbon-dioxide is the method that reduces the carbon-dioxide from the industries to prevent earth from the global warming. In order to apply to the practical site, it is inevitable to investigate the possibility of damage in the pipe or components by carbon-dioxide. In this paper, the immersion test is performed to estimate the suitability of the rubber which is used to seal or connect the pipelines because the rubber has not been validated. Also, the immersion test is carried out in a certain condition(pre- and supercritical state).

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.33-38
• /
• 2011

This study is a research for analysis the states of flame resistant treatment and its system which important in fire prevention by ignition delay of early stage of fire. Some problems arose in the flame resistant treatment site were analysed through the meeting with fire officer and businessman related with flame resistant treatment, and visiting the flame resistant treatment places. From the meeting, visiting and reviewing the code system we find the following problems. First one is a problem of excessive competition with many company in small market of flame resistant treatment and to reduce the cost, the businessman who have no professional technic do not work along the specification. Second one is the inspection system which do not inspect on site but inspect by sampling the flame resistant treated materials submitted by businessman. And there are some problems arose about the reliability and consistency of flame resistant performance of the sample and the treated site. To solve the above problems, we suggest some countermeasure.