• Journal of Trauma and Injury
• /
• v.22 no.2
• /
• pp.172-178
• /
• 2009

Purpose: We performed this study to determine how the emergency trauma team affects the treatment of patients with multiple severe trauma and to discuss the effect and the direction of the emergency trauma team's management. Methods: We performed a retrospective analysis of 518 patients who visited our emergency department with severe trauma from August 2006 to July 2008. We divided the severe trauma patients into 2 groups : patients before and after trauma team management (Group 1 and Group 2). Then, we compared demographic characteristics, mechanisms of injury, and treatment outcomes (lengths of stay in the ED, admission ratio, and in-hospital mortality) between the 2 groups. In the same way, patients with multiple severe trauma were divided into 2 groups, that are patients before and after trauma team management (Group 3 and Group 4) and analyzed. Results: There was no significant difference, except mean age, between groups 1 and 2. In group 4 patients, compared to group 3 patients, the lengths of stay in the ED were lower (p value < 0.001), and the admission ratio were higher (p value = 0.017), but there was no significant difference in the in-hospital mortality between the groups 3 and 4. Conclusion: When patients with multiple severe trauma visit the ED, the emergency trauma team' management can decrease the lengths of stay in the ED and increase the admission ratio, but does not produce a decrease in the in-hospital mortality rate. Further investigations of emergency trauma team management are needed to improve treatment outcomes for patients with multiple severe trauma.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.230-237
• /
• 2006

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.2
• /
• pp.94-97
• /
• 2007

• Journal of the Korean Ceramic Society
• /
• v.52 no.4
• /
• pp.243-247
• /
• 2015

Si(Al)ON precursor was synthesized by formation of new Si-N bond using organoaluminum imine and liquid type poly(phenyl carbosilane). It was decomposed between $200-600^{\circ}C$, and the ceramic yield was 51% after pyrolysis. 150 - 200 nm in thickness of coating film was obtained by spin coating method. The precursor was easily oxidized during process because it was unstable in air. However the oxygen content was limited to 0.5 - 0.7 to silicon in heat treatment step. Even though the content of nitrogen was decreased by pyrolysis, Al-N and Si-N bonds were formed in ammonia atmosphere, and Si(Al)ON film was formed with 0.2 in content to silicon.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.1
• /
• pp.12-17
• /
• 2005

Effects of Zn and Zr additions on the microstructure and mechanical properties of Al-5%Mg-1%Mn alloys were investigated. As Zn content increased in the Al-Mg-Mn-Zn alloys, the tensile strength and ductility of as-cast alloys rather decreased while the tensile strength of the heat-treated alloys significantly increased mainly due to the precipitation of fine $MgZn_2$ phases. Small amount of Zr was added to the 3%Zn alloy to further enhance the mechanical properties, and it appeared to increase the strength and ductility, especially in as-cast state.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.5
• /
• pp.299-304
• /
• 2004

Influence of Ca addition on microstructure and room temperature mechanical properties has been studied for AZ31(Mg-3%Al-1%Zn-0.2%Mn)-(0~0.5)%Ca wrought alloys, based on experimental results from metallography, X-ray diffractometry and mechanical tests. Yield strength, ultimate tensile strength and hardness of the alloys increased remarkably with increasing Ca content, whereas elongation was deteriorated continuously. Microstructural examination revealed that Ca addition efficiently refined grains of ${\alpha}$(Mg) phase and that some of the Ca dissolved in ${\beta}(Mg_{17}Al_{12})$ precipitates. The former and the latter facts are thought to be responsible for improved strength and loss of ductility of the AZ31+Ca wrought alloys, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.3
• /
• pp.118-125
• /
• 2005

Low temperature plasma treatment with different gases and rf powers were performed to improve the adhesion strength between polytetrafluoroethylene(PTFE) and electroless deposited copper. According to the research, $H_2$ plasma having hydrogen radical was more effective in surface polarity modification than $O_2$ plasma due to the defluorination reaction. However, surface roughness of PTFE was more increased with $O_2$ than $H_2$ plasma. PTFE treated with $120W-O_2$ plasma and $250w-H_2$ plasma, consecutively showed rougher surface than single step $250w-H_2$ plasma treated one and more hydrophilic than single step $120W-O_2$ plasma treated one. And it showed 5B tape test grade, which is better adhesion property than 1B or 3B obtained by single step plasma treatment. In addition, adhesion strength between PTFE and Cu deposit is also deeply affected by residual water on its interface.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.682-689
• /
• 2019

The Korean flowering cherry is a popular tree. However, the trees have started to defoliate early, including those in Gurye. Thus, it is necessary to identify the causes of the early defoliation and how to manage them. Therefore, the purpose of this study was threefold: 1) to investigate the early defoliation of flowering cherry trees, 2) to identify the differences in growth and flowering of the trees in response to treatment, and 3) to suggest an optimal treatment for the trees. The experiment was conducted in Gurye at a site 3km long with 102 flowering cherry trees along a street. There were three treatments: control, an environmentally friendly insecticide and a disinfectant(treatment 1), and an environmentally friendly insecticide, a disinfectant, and irrigation (treatment 2). The trees in Gurye were compared to trees on Jeju Island. The defoliation rates of the flowering cherry in Gurye were significantly higher than those on Jeju Island at each measurement time. Within Gurye, the defoliation rate was significantly higher in the trees of the control than in the two treatments and only the trees in the control from Gurye had shot-hole disease. Post-treatment, twigs collected from the control during April showed significantly poorer growth, lower numbers of flowering buds per twig, and lower numbers of foliar buds. The trees given treatment 1 showed significantly greater growth, number of total buds, flowering buds per twig, and density of buds than the trees given treatment 2. After analyzing the correlations, it was established that early defoliation led to poorer growth, affecting the flowering of the trees.

• Journal of Environmental Impact Assessment
• /
• v.24 no.3
• /
• pp.278-286
• /
• 2015

Pilot scale system was designed to identify the growth and movement of algae, depending on environmental changes(retention time, nutrient concentration, etc) in Gangjeong-Goryeong Weir of the Nakdong River. Considering the stability of algal culture and easy observation of algal growth, pilot scale system was made of transparent acrylic material(3 sets of flexible cylindrical water tanks with 1 m diameter and 4 m height). Auxiliary equipments include light intercepter, water inflow device for different water depth and storage of reclaimed water. The retention time was 2 days(before construction of weir; treatment 1), 8 days(after construction of weir, 2013; treatment 2) and 30 days(2014; treatment 3). According to the water temperature of treatment 1 were similar by depth, treatment 3 showed a difference between the surface(0 m) and bottom(4 m) more than $3^{\circ}C$. DO, pH showed relatively high in the surface than the bottom. Nutrients showed eutrophic condition in all experiments. The Chlrophyll-a concentration of the treatment 1 showed a relatively lower value than the Chlrophyll-a concentration of the treatment 2 and 3. Therefore, the retention time was considered to influence the growth of phytoplankton.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.5
• /
• pp.664-670
• /
• 2016

Cheonggukjang (CKJ) is a Korean traditional food made of fermented soybeans. In comparison to normal intake of soybeans, Cheonggukjang has high digestibility with bioactive, antioxidant substances, and thrombolytic enzymes. Recent studies have reported anti-oxidant, anti-cancer, anti-inflammatory, anti-obesity activities as well as inhibitory activities against osteoporosis for CKJ. In this study, we identified the effects of CKJ on osteoblast differentiation by increasing the polyglutamic acid (PGA) content of CKJ. Alkaline phosphatase (ALP) activity and mineralization significantly increased in response to treatment with both natural CKJ (CKJ A) and PGA-increased CKJ (CKJ B). However, CKJ B exhibited higher ALP activity and mineralization than CKJ A. Real-time reverse transcription PCR demonstrated that mRNA expression of osteoblastic-associated genes such as type I collagen, alkaline phosphatase, osteocalcin, and osteopontin in C2C12 cells was significantly up-regulated by CKJ A or B treatment. These results indicate that treatment with CKJ has an anabolic effect on bone by increasing osteoblastic differentiation and ALP activity. Increasing PGA content in CKJ had a greater effect than CKJ A on up-regulation of osteoblastic gene expression in osteoblast cells.