• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.274-274
• /
• 2007

LTCC 소재로 응용을 위해 Mg-Si-O계 세라믹스에 glass frit을 첨가하여 소결 및 마이크로파 유전특성에 관한 연구를 진행하였다. $Mg_2SiO_4$를 기본조성으로 하고 $B_2O_3-ZnO-Na_2O-SiO_2-Al_2O_3$계 glass를 20~40wt%로 첨가하여 $900^{\circ}C$에서 1시간 소결하였을 때 glass 함량이 증가함에 따라 밀도$(g/cm^3)$ 및 유전율$(\varepsilon_r)$은 증가하였고 품질계수$(Q{\times}f_0)$ 값은 감소하는 경향을 보였다. $900^{\circ}C$에서 1시간 소결한 소결체의 유전특성은 유전율 $(\varepsilon_r)$ = 6.5, 품질계수 $(Q{\times}f_0)$ = 4,000(GHz), 온도계수 $({\tau}_f)={\pm}10ppm/^{\circ}C$로 우수한 특성을 확인하였다. 그리고 Glass Milling 효과에 따른 glass-ceramics 소결체의 미세구조, 마이크로파 유전특성을 비교 고찰하였다.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.1
• /
• pp.21-32
• /
• 2019

Solar hot water system produces hot water using solar energy. If it is not used effectively, overheating occurs during the summer. Therefore, a lot of research is being done to solve this. This study develops thermoelectric power module applicable to solar hot water system. A thermoelectric material can directly convert thermal energy into electrical energy without additional power generation devices. If there is a temperature difference between high and low temperature, it generate power by Seebeck effect. The thermoelectric module generates electricity using temperature differences through the heat exchange of hot and cold water. The water used for cooling is heated and stored as hot water as it passes through the module. It can prevent overheating of Solar hot water system while producing power. The thermoelectric module consists of one absorption and two radiation part. There path is designed in the form of a water jacket. As a result, a temperature of the absorption part was $134.2^{\circ}C$ and the radiation part was $48.6^{\circ}C$. The temperature difference between the absorption and radiation was $85.6^{\circ}C$. Also, The Thermoelectric module produced about 122 W of irradiation at $708W/m^2$. At this time, power generation efficiency was 2.62% and hot water conversion efficiency was 62.46%.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.585-587
• /
• 2004

Diameter base protocol is intended to provide an AAA framework for applications such as IP mobility. Currently Diameter base protocol is standardized to RFC 3588, but there are some problems. One of them, path authorization is already argued at IETF WG Mailing List. According to RFC 3588, path authorization function causes inefficient data traffic and conflicts with RFC 3588 itself. In this paper, we analysis these problems about path authorization function and propose more improved solution.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.206-208
• /
• 2003

PWM AC/DC 컨버터에서 입력 전원측에서 제어보드까지 거리가 상당히 멀리 떨어져 있는 경우, 입력 전압의 신호케이블은 매우 길고 복잡하게 설치되며 외부 노이즈에 노출되기 쉽다. 본 논문에서는 이러한 문제를 해결하기 위하여 무선 전압 센서를 제안한다. 무선 전압 센서는 전압 센서에서 측정된 신호를 제어보드까지 유선 케이블로 전송하지 않고, 무선 신호로 전송한다. 따라서 입력전원측이 원거리에 있더라도 쉽게 설치할 수 있고 외부 노이즈에 대한 면역성이 강한 PWM AC/DC 컨버터를 제공한다.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.05a
• /
• pp.100-101
• /
• 2004

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.108-109
• /
• 2010

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.301-303
• /
• 2005

This paper presents long-term shunt capacitor planning using optimal power flow. OPF allows the planning engineer to find feasible solution with minimal amount of engineering time. We used OPF for Shunt capacitor planning to get an optimal solution. The result of OPF is compared to the analysis by the conventional loadflow method and it is proved that OPF gives more cheaper and better planning solution. With the result, we analyzed the operational perspective for the reactive power supply and demand.

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.48-48
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1602-1605
• /
• 2005

An audit tracer is one of the last ways to defend an attack for network equipments. Firewall and IDS which block off an attack in advance are active way and audit tracing is passive way which analogizes a type and a situation of an attack from log after an attack. This paper explains importance of audit trace function in network equipment for security and defines events which we must leave by security audit log. We design and implement security audit system for secure router. This paper explains the reason why we separate general audit log and security audit log.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.3
• /
• pp.319-330
• /
• 2002

We consider BMAP/G/1 queueing system with N-policy and multiple vacations. We derive the vector generating functions of the queue length in a factorized form and interpret the factorization. We also derive the mean queue length.