• Journal of Korea Water Resources Association
• /
• v.39 no.7 s.168
• /
• pp.627-636
• /
• 2006

This study estimates adequate discharge to meet the specified target water quality concentration using the pollutant load of the Geum river basin given in TMDL (Total Maximum Daily Load) report. During the 1st phase, BOD is chosen as a target water quality constituent under regulation of the Ministry of Environment in Korea. BOD, TN, and TP loads estimated based on the TMDL and provincial zones were re-distributed for 10 major tributaries, and the remaining areas along the main river are classified as 15 incremental flow areas. Water quality modeling was conducted using Qual2E for the low flow period of a year (i.e. $March{\sim}April$). The results of the model simulation showed that about 30 cms from the Daechung dam would be sufficient to satisfy the target water quality in the Geum river downstream of the Daechung multipurpose Dam.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.78-83
• /
• 2006

In this paper, we propose Active bandwidth allocation scheme of multiplexed streamed MPEG video sequences over BcN network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. n the result target quality value were not sufficient, we proposed a over-allocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of four different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared over-allocation with reallocation method. As a result, In both schemes, the objected target quality value is achieved, the sufficient valuce bandwidth under 10% when measurement period is over 1.8 sec, the utilization is over 0.9. Especially, the Target of quality value of the reallocation scheme is better at the same condition.

• Journal of Korean Society for Quality Management
• /
• v.25 no.4
• /
• pp.57-70
• /
• 1997

Consider a production system where all manufactured products are screened through automatic inspection equipment. The products for which the measured value of quality characteristic is larger than the lower screening specification limit (SL) and smaller than the u, pp.r screeing specification limit(SU) are accepted. Those smaller than SL are reworked and those larger than SU are excluded from the process. Assuming that the quality characteristic is normally distributed with known variance, this paper suggests cost models which involve inspection cost, production cost, rework cost, exclusion cost and quality cost, and presents the methods of finding the optimal values of the screening specification limits and the process target. Numerical example is given to demonstrate the a, pp.icability of the cost models suggested in this paper.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.119-126
• /
• 2001

The key point in establishing water quality management measures is how to decide the load reduction for pollution sources. This study was performed to compare reduction methods for BOD loadings to achieve water quality standards at the end of the Yeongsan river. The target year is 2006 and 2011 and reduction methods are uniform treatment and treatment by influence rate. Using QUAL2E model, the study was performed under the conditions of establishing and non-establishing the publicly owned treatment works(POTWs). Uniform treatment which allocate the same reduction rate to pollution sources showed that all streams into the river should be applied for the reduction. However, treatment by influence rate which allocate the reduction rate by the order of influence rate showed that achieving target quality might be possible with a few streams for the reduction. But total amount of load reduction of streams was not significantly different from two methods.

• Health Policy and Management
• /
• v.19 no.3
• /
• pp.1-26
• /
• 2009

Objectives : To identify target areas and set priorities among those areas identified for national quality evaluation. Methods : Target areas were identified from: i) analysis of the national health insurance claims data, mortality and prevalence data ii) various group surveys, including representatives from 22 medical specialty associations, 19 physician associations, QI staffs in hospital, civil organizations, and commissioners of Health Insurance Review and Assessment Service(HIRA) ⅲ) literature reviews and RAM(RAND/UCLA appropriateness method). The priority areas for national quality evaluation represented the full spectrum of health care and the entire life span. The criteria for selecting the priority areas were impact, improvability, and measurability. The priority areas were divided into three categories : short-term, mid-term, long-term. Results: Based on the group surveys and the data analysis, 46 candidates were selected as quality evaluation priority areas. 13 areas were selected as having a short-term priority areas: tuberculosis, community acquired pneumonia, stroke, ischaemic heart disease, diabetes, hypertension, chronic lower respiratory disease(asthma, chronic obstructive pulmonary disease), intensive care unit, emergency room, nosocomial infection, use of antibiotics, multiple medication and renal failure. This results suggested that we need to enlarge the target priority areas to the chronic diseases in short-term. Conclusions: The priority areas identified from the study will assist healthcare quality associated institutions as well as HIRA in selecting quality evaluation areas. It is required to develope and implement strategies for improving the quality of care within the next 5 years.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.13-21
• /
• 2008

This study conducted water quality projection of year 2010 in Miho stream of the Geum river basin by using GIS. Pollutant load data of corresponding tributary of the Miho stream is estimated based on the pollutant load of TMDL zone to simulate water quality of the Miho stream for BOD, TN, and TP. The pollutant load of the urban area such as Bochung and Musim stream basin is relatively high and the wastewater treatment plant of Chunju city directly affects the entire water quality of the target area. As a result, simulation result reveals that water treatment facility needs more refined treatment process for efficient water quality management. Also, to meet the target water quality of the Miho stream water quality simulation estimates the additional dilution flow by increasing irrigation water supplied from the Daechung dam through the Musim stream.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.115-118
• /
• 2012

Purpose: The Levey-Jennings chart controlled measurement values that deviated from the tolerance value (mean ${\pm}2SD$ or ${\pm}3SD$). On the other hand, the upgraded Westgard Multi-Rules are actively recommended as a more efficient, specialized form of hospital certification in relation to Internal Quality Control. To apply Westgard Multi-Rules in quality control, credible quality control substance and target value are required. However, as physical examinations commonly use quality control substances provided within the test kit, there are many difficulties presented in the calculation of target value in relation to frequent changes in concentration value and insufficient credibility of quality control substance. This study attempts to improve the professionalism and credibility of quality control by applying Westgard Multi-Rules and calculating credible target value by using a commercialized quality control substance. Materials and Methods : This study used Immunoassay Plus Control Level 1, 2, 3 of Company B as the quality control substance of Total T3, which is the thyroid test implemented at the relevant hospital. Target value was established as the mean value of 295 cases collected for 1 month, excluding values that deviated from ${\pm}2SD$. The hospital quality control calculation program was used to enter target value. 12s, 22s, 13s, 2 of 32s, R4s, 41s, $10\bar{x}$, 7T of Westgard Multi-Rules were applied in the Total T3 experiment, which was conducted 194 times for 20 days in August. Based on the applied rules, this study classified data into random error and systemic error for analysis. Results: Quality control substances 1, 2, and 3 were each established as 84.2 ng/$dl$, 156.7 ng/$dl$, 242.4 ng/$dl$ for target values of Total T3, with the standard deviation established as 11.22 ng/$dl$, 14.52 ng/$dl$, 14.52 ng/$dl$ respectively. According to error type analysis achieved after applying Westgard Multi-Rules based on established target values, the following results were obtained for Random error, 12s was analyzed 48 times, 13s was analyzed 13 times, R4s was analyzed 6 times, for Systemic error, 22s was analyzed 10 times, 41s was analyzed 11 times, 2 of 32s was analyzed 17 times, $10\bar{x}$ was analyzed 10 times, and 7T was not applied. For uncontrollable Random error types, the entire experimental process was rechecked and greater emphasis was placed on re-testing. For controllable Systemic error types, this study searched the cause of error, recorded the relevant cause in the action form and reported the information to the Internal Quality Control committee if necessary. Conclusions : This study applied Westgard Multi-Rules by using commercialized substance as quality control substance and establishing target values. In result, precise analysis of Random error and Systemic error was achieved through the analysis of 12s, 22s, 13s, 2 of 32s, R4s, 41s, $10\bar{x}$, 7T rules. Furthermore, ideal quality control was achieved through analysis conducted on all data presented within the range of ${\pm}3SD$. In this regard, it can be said that the quality control method formed based on the systematic application of Westgard Multi-Rules is more effective than the Levey-Jennings chart and can maximize error detection.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.110-117
• /
• 2018

Machines and facilities are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. By the result of degeneration, non-conforming products and malfunction of machine occur. Therefore a periodic preventive resetting the process is necessary. This type of preventive action is called 'preventive maintenance policy.' Preventive maintenance presupposes that the preventive (resetting the process) cost is smaller than the cost of failure caused by the malfunction of machine. The process mean shift problem is a field of preventive maintenance. This field deals the interrelationship between the quality cost and the process resetting cost before machine breaks down. Quality cost is the sum of the non-conforming item cost and quality loss cost. Quality loss cost is due to the deviation between the quality characteristics from the target value. Under the process mean shift, the quality cost is increasing continuously whereas the process resetting cost is constant value. The objective function is total costs per unit wear, the decision variables are the wear limit (resetting period) and the initial process mean. Comparing the previous studies, we set the process variance as an increasing concave function and set the quality loss function as Cpm+ simultaneously. In the Cpm+, loss function has different cost coefficients according to the direction of the quality characteristics from target value. A numerical example is presented.

• Journal of Korea Multimedia Society
• /
• v.18 no.1
• /
• pp.42-51
• /
• 2015

In this paper, we analyze the quality status of Health and Welfare division's standardized log and asses the characteristics of the institutions' logs analysis to establish the criteria to minimize hazards and control the quality of log's institutional details to limit extraction. As a result, extraction condition's proposed development direction to adequately assess and control health and welfare abuses privacy control target log. This improvement over the status and quality of information shared with relation to institutional work of the log quality characteristics is made possible. In addition, quality control and inspection standards were prepared in accordance with the institutional log characteristics. Future research will include performing continuous analysis and improvement activities on the quality of logs with integrated control of sharing personal information and distributing information about logs' quality to proactively target organ. Therefore, we expect that correcting proactive personal information misuse and leakage is possible to achieve.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.22-28
• /
• 2007

The STIR(Signal Tracking & Illumination Radar) in KDX(Korean Destroyer Experimental) combat system acquires target from designating 3-D target information of surveillance radar (MW-08), and The performance of radar is decided by target acquisition time and accuracy of tracking loop because the STIR tracks automatically in accordance with tracking algorithm. In the view of ship, elements related with target acquisition time of the STIR can be various. In this paper the target acquisition time of the STIR is reduced by identifying the elements and suggesting the performance improvement method. The way of performance improvement is suggested through analysing main affecting factors. First, tracking algorism is required for analysis. Second, fitness of parameters that control elements related with acquisition distance is analyzed. And the third, accuracy of ship based sensors is analyzed. In conclusion, acquisition time against ship target can be advanced to 3 seconds from 10 seconds.