• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.373-378
• /
• 2006

We report on plasma damage free-sputtering technologies for organic light emitting diodes (OLEDs), organic thin film transistor (OTFT) and flexible displays by using a box cathode sputtering (BCS) method. Specially designed BCS system has two facing targets generating high magnetic fields ideally entering and leaving the targets, perpendicularly. This target geometry allows the formation of high-density plasma between targets and enables us to realize plasma damage free sputtering on organic layer without protection layer against plasma. The OLED with Al cathode prepared by BCS shows electrical and optical characteristics comparable to OLED with thermally evaporated Mg-Ag cathode. It was found that OLED with Al cathode layer prepared by BCS has much lower leakage current density ($1{\times}10^{-5}\;mA/cm^2$ at -6 V) than that $(1{\times}10^{-2}{\sim}-10^0\;mA/cm^2)$ of OLED prepared by conventional DC sputtering system. This indicates that BCS technique is a promising electrode deposition method for substituting conventional thermal evaporation and DC/RF sputtering in fabrication process of organic based optoelectronics.

• Mycobiology
• /
• 제30권4호
• /
• pp.233-239
• /
• 2002

The main aim of this study is to evaluate the efficiency of two biologically active compounds(Strom and F-760) in control of wheat root rot disease and its causal organisms. Fusarium graminearum, F. oxysporum, F. solani and Bipolaris sorokiniana were used as target organisms. In vitro, the two compounds showed fungicidal effect on all investigated pathogens resulted in suppression of radial growth and mycelial dry weight of them. Under greenhouse conditions, treatment of wheat grains with either Strom or F-760 before cultivation significantly reduced the percent of disease distribution as well as the mean disease rating of plants in both seedling and flowering stages. Fresh and dry weights of plants as well as water maintenance capacity were increased as the result of applying these compounds as seed dressing. Also data showed that the membrane stability of plants was injured as a result of infection with all investigated organisms, while this injury was alleviated when F-760 and Strom were applied. The $K^+$ efflux and the leakage of UV absorbing metabolites was stimulated with fungal infection. However, F-760 and Storm treatment partially retarded the stimulatory effect on leakage of $K^+$ and UV-absorbing metabolites of fungal infected plants. On the other side, the fungal infection had inhibitory effects on pigment fractions(chlorophyll a, b, and carotenoids) biosynthesis in wheat leaves. This retarding effect was partially or completely alleviated as the grains were treated with the applied compounds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.53-54
• /
• 2005

We report on plasma damage free-sputtering technologies for organic light emitting diodes (OLEDs), organic thin rim transistor (OTFT) and flexible displays by using a box cathode sputtering (BCS) method. Specially designed BCS system has two facing targets generating high magnetic fields ideally entering and leaving the targets, perpendicularly. This target geometry allows the formation of high-density plasma between targets and enables us to realize plasma damage free sputtering on organic layer without protection layer against plasma. The OLED with top cathode prepared by BCS shows electrical and optical characteristics comparable to OLED with thermally evaporated Mg-Ag cathode. It was found that TOLED with ITO or IZO top cathode layer prepared by BCS has much lower leakage current density ($1\times10^{-5}$ mA/cm2 at -6V) than that ($1\times10^{-1}\sim10^{\circ}mA/cm^2$)of OLED prepared by conventional DC sputtering system. This indicates that BCS technique is a promising electrode deposition method for substituting conventional thermal evaporation and dc/rf sputtering in fabrication process of organic based optoelectronics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.320-321
• /
• 2008

Ferroelectric $SrBi_2Ta_2O_9$(SBT) ceramics were deposite on Pt/Ti/SiO2/Si substrates using a sintered SBT target and then were annealed in the oxygen atmosphere at $750^{\circ}C$, the most excellent characteristics were shown, and the remnant polarization ($2P_r$) value and the coercive electric field ($E_c$) were respectively about 12.40[${\mu}C/cm^2$] and 30[kV/cm]. Moreover, the excellent fatigue characteristic t was little aged even after $10^{10}$ cycles of switchings. The leakage current density and the dielectric constant of the SBT capacitor annealed in the oxygen atmosphere were respectively approximately $2.13\times10^{-9}$ [A/$cm^2$] and 340.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.11-21
• /
• 2020

This study aims to develop and advance the evaluation technology for assessing PHWR safety. For this purpose, the complete loss of AC power or station blackout (SBO) was selected as a target accident scenario and the analysis model to evaluate the plant responses was envisioned into the MARS-KS input model. The model includes the main features of the primary heat transport system with a simplified model for the horizontal fuel channels, the secondary heat transport system including the shell side of steam generators, feedwater and main steam line, and moderator system. A steady state condition was achieved successfully by running the present model to check out the stable convergence of the key parameters. Subsequently, through the SBO transient analyses two cases with and without the coolant leakage via the PHTS pumps were simulated and the behaviors of the major parameters were compared. The sensitivity analysis on the amount of the coolant leakage by varying its flow area was also performed to investigate the effect on the system responses. It is expected that the results of the present study will contribute to upgrading the evaluation technology of the detailed thermal hydraulic analysis on the SBO transient of the operating PHWRs.

• 말소리와 음성과학
• /
• 제7권4호
• /
• pp.93-99
• /
• 2015

In case of PAS test, the air is sometimes leaked although the mask is tightly attached to the face, which is not reliable on the measured values. Therefore, this study aimed to assist the clinical practice suggesting the test method of PAS without air leakage. In the healthy subjects with 12 males and 12 females over 19 years old, three types of tests were performed on the voicing efficiency among the protocol of PAS Model 6600. They are; first, to attach the mask tightly to the face holding the handle of PAS with the subject's two hands (Method 1); second, to attach the mask tightly to the face holding the handle of PAS with the subject's one hand and pushing the body of PAS strongly with the other hand (Method 2); and third, to attach the mask tightly to the face pushing the upper part of the mask by the tester when the subject attached the mask to his or her face holding the handle of PAS with two hands (Method 3). Upon the study analyses, the mean negative pressure, the mean phonogram, subglottic air pressure, and voicing efficiency were shown to be statistically significantly different during PAS test in males depending on the methods. (p<.05) In case of females, only the target airflow rate showed significant difference depending on the methods during PAS test. (p<.001) In conclusion, Method 2 enhanced the noise level and strength while Method 1 was likely to leak the air more compared to the other two methods in males. In case of females, Method 1 showed significant leakage of the air flow. Not to allow the air flow leakage without affecting the outcome of PAS test, it will be the most useful for the tester to push the mask to the subject's face tightly (Method 3).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.624-627
• /
• 2003

The BLT thin-films were one of the promising ferroelectric materials with a good leakage current and degradation behavior on Pt electrode. The BLT target was sintered at $1100^{\circ}C$ for 4 hours at the air ambient. $Bi_{3.25}La_{0.75}Ti_3O_{12}$ (BLT) thin-film deposited on $Pt/Ti/SIO_2/Si$ wafer by rf magnetron sputtering method. At annealed $700^{\circ}C$, (117) and (006) peaks appeared the high intensity. The hysteresis loop of the BLT thin films showed that the remanent polarization ($2Pr=Pr^+-Pr^-$) was $16uC/cm^2$ and leakage current density was $1.8{\times}10^{-9}A/cm^2$ at 50 kV/cm with coersive electric field when BLT thin-films were annealed at $700^{\circ}C$. Also, the thin film showed fatigue property at least up to $10^{10}$ switching bipolar pulse cycles under 7 V. Therefore, we induce access to optimum fabrication condition of memory device application by rf-magnetron sputtering method in this report.

• 정보보호학회논문지
• /
• 제21권1호
• /
• pp.125-133
• /
• 2011

최근 들어, 모바일 단말의 폭발적인 보급 더불어 단말 내의 중요정보가 외부 저장 매체로 불법적으로 유출되는 보안 위협이 증가되고 있다. 따라서, 본 논문에서는 단말 내 중요정보의 외부 저장 매체로의 유출 방지 기법을 설계 및 구현한다. 이 기법은 파일의 임의위치에서 시그니처를 샘플링하고 이를 이용하여 유출 탐지, 차단 기능을 수행한다. 시그니처 샘플링 과정은 대상 파일을 일정 크기의 추출 윈도우로 구분한 후 이 영역 내에서 임의의 위치에서 1개 이상의 시그니처를 추출한다. 그리고, 가장 효과적인 샘플링을 수행하기 위하여 전체 샘플링, 이항분포 샘플링, 동적 샘플링의 다양한 추출 방식을 구현 및 시뮬레이션을 수행 한다. 제안된 기법은 파일의 임의 위치에서 시그니처를 샘플링하여 공격자의 시그니처 예측성을 낮출 수 있고 원본 데이터에 대한 변형 없이 유출 방지기능을 효과적으로 구현할 수 있다는 장점을 가진다. 따라서, 사용자 편의성이 중시되고 비교적 저 사양의 시스템인 모바일 단말에서 효과적으로 유출방지 기능을 구현할 수 있는 기법이다.

• Safety and Health at Work
• /
• 제15권1호
• /
• pp.42-52
• /
• 2024

Background: The lack of headforms that accurately reflect the head characteristics of Koreans and the demographic composition of the Korean population can lead to inadequate FFR testing and reduced effectiveness of FFRs. Method: Direct measurements of 5,110 individuals and 3D measurements of 2,044 individuals, aged between 9 and 69 years, were sampled from the data pool of Size Korea surveys based on the age and gender ratios of the Korean resident demographics. Seven head dimensions were selected based on the ISO 16976-2, availability of Size Korea measurements, and their relevance to the fit performance of FFRs. A principal component analysis (PCA) was performed using the direct measurements to extract the main factors explaining the head characteristics and then the main factors were standardized and remapped to 3D measurements, creating five size categories representing Korean head shapes. Lastly, representative 3D headforms were constructed by averaging five head shapes for each size category. Results: The study identified two main factors explaining Korean head characteristics by the PCA procedure specified in ISO 16976-2 and developed five representative headforms reflecting the anthropometric features of Korean heads: medium, small, large, short & wide, and long & narrow. Conclusion: This study developed representative headforms tailored to the Korean population for conducting total inward leakage (TIL) tests on filtering facepiece respirators (FFRs). The representative headforms can be used for TIL testing by employing robotic headforms to enhance the performance of FFRs for the Korean target population.

• 융합보안논문지
• /
• 제23권4호
• /
• pp.33-41
• /
• 2023

최근 지능형 지속위협(APT) 공격조직은 국가핵심기술을 보유한 기업이나 기관을 대상으로 다양한 취약점 및 공격기법을 악용해서 랜섬웨어를 유포한 후 금전을 요구하거나 국가적으로 중요한 산업기밀 자료를 절취해서 암시장(다크웹)에 유통시키거나 제3국에 판매 또는 기술격차를 줄이는데 활용하는 등 국가차원의 보안대비가 필요하다. 이 논문에서는 Kimsuky, Lazarus 등 한국을 대상으로 APT 공격으로 산업기밀유출 피해를 입혔던 공격조직의 공격수법을 MITRE ATT&CK 프레임워크로 분석하고, 기업의 보안시스템이 추가적으로 갖추어야 할 사이버 보안관련 관리적, 물리적 및 기술적 보안요구사항 26개를 도출하였다. 또한, 보안 요구사항을 실제 보안업무에 활용할 수 있도록 보안 프레임워크 및 시스템 구성방안도 제안하였다. 이 논문에서 제시한 보안요구 사항은 보안시스템 개발 및 운영자들이 기업의 산업기밀 유출 방지를 위한 보안업무에 활용할 수 있도록 실질적인 방법 및 프레임워크를 제시했으며 향후 이 논문을 기반으로 다양한 APT 공격그룹의 고도화·지능화된 공격을 분석하고 관련 보안대책 연구가 추가적으로 필요하다.