• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.367-371
• /
• 2007

Large capacity UPS and emergency generators are being installed and operated at the specific target of important electric facilities that need uninterruptible power supply by the method of countermeasure against power failure for the less reliable incoming power method. Recently, CTTS (Closed Transition Transfer Switch) is being used as uninterruptible power transfer switch at the Common sources of electricity, generator and multiple generators. In this paper, construction plans for uninterruptible power supply system has been suggested in which CTTS has been applied to the secondary of incoming power generator for reliable common dual system method. By briefing the construction of incoming power facilities, large capacity UPS, emergency generator installation space and investment saving effects can be achieved.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.135-146
• /
• 2013

PURPOSES : This study aimed to analyze the impact the operation of pre-signals at 4-leg signalized intersections and present primary environmental factors of roads that need to be considered in the installation of pre-signals. METHODS : Shift of proportions safety effectiveness evaluation method which assesses shifts in proportions of target collision types to determine safety effectiveness was applied to analyze traffic crash by types. Also, Empirical Bayes before/after safety effectiveness evaluation method was adapted to analyze the impact pre-signal installation. Negative binomial regression was conducted to determine SPF(safety performance function). RESULTS : Pre-signals are effective in reducing the number of head on, right angle and sideswipe collisions and both the total number of personal injury crashes and severe crashes. Also, it is deemed that each factor used as an independent variable for the SPF model has strong correlation with the total number of personal injury crashes and severe crashes, and impacts general traffic crashes as a whole. CONCLUSIONS: This study suggests the following should be considered in pre-signal installation on intersections. 1) U-turns allowed in the front and rear 2) A high number of roads that connect to the intersection 3) Many right-turn traffic flows 4) Crosswalks installed in the front and rear 5) Insufficient left-turn lanes compared to left-turn traffic flows or no left-turn-only lane.

• The Journal of Korea Robotics Society
• /
• v.16 no.3
• /
• pp.199-206
• /
• 2021

The robot is an effective means to perform repetitive tasks quickly and accurately. It could be more effective in dangerous environments where human is difficult to access. The construction site is a dangerous environment with a high possibility of industrial accidents where heavy work is frequently carried out at a high place. In particular, an accident in the construction site is highly likely to lead to a severe disaster. Of course, various technologies are being developed to monitor the safety of workers in construction sites and prevent accidents, but there is a limit to eliminate the risk of accidents. Therefore, it is necessary to make efforts to replace workers exposed to dangerous environments with equipment or robots that could be controlled remotely in a more active way. In this study, Remote Precise Installation System was proposed to replace the workers exposed to the risk of accident at a high place during the bridge construction. Also, the conceptual design and analytical reviews of this system were carried out. Suppose Remote Precise Installation System is developed according to the derived concept and the target performance. In that case, this system is expected to be applied as a technology that can effectively replace the workers at the bridge construction site.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.37-42
• /
• 2016

This paper proposes a method to develop a high-precision dimension measurement system using a linear variable differential transformer sensor. The Dimension targets for measurement is carbon material vanes of key element in the rotating parts within vehicle circulating pump. Data acquisition system for dimension measurement is designed using the NI Compact RIO. And the program applying the dimension measurement algorithm is built using NI LabVIEW. The dimension measuring program is composed of a FPGA program, Real Time program and Host program. The method of the experiment compares master vane with target vane for measure the length of the carbon material vane. The experimental results confirmed the usefulness of the accuracy within ${\pm}4um$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.69-74
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV image. UV camera developed a $6.4[^{\circ}]{\times}4.8[^{\circ}]$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. UV camera to measure the discharge count and the UV image was developed, compared with a commercial camera, there was no significant difference. In salt spray environments breakdown voltage was lower than the normal state, thereby discharging the image was rapidly growing phenomenon.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.24-31
• /
• 2011

The purpose of this study is to find an efficient way using dimmable LED lamps to describe specific target illuminance and color temperature. This study used 14 dimmable LED lamps as same or different color temperature. The method of study is to measure of electric power consumption using different color temperature of dimmable LED lamps that were combination of two or three dimmable LED lamps by simultaneously dimming. Through this method, the electric power consumption was compared with all combinations of the illuminance and color temperature.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.131-137
• /
• 2010

This paper considers and suggests the life cycle of the power equipments installed in buildings. The target equipments were divided into 5 groups by a couple of conditions, and a theoretical consideration and domestic foreign case studies were carried out. As a result, the most appropriate life cycles and monitoring periods were suggested for each group. The suggested results are expected to practically help the field electricians determine whether they have to replace the deteriorated equipments or not.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.1-7
• /
• 2015

Korea's electricity supply and demand policy has focusing on electricity demand side management instead of the expanding supply and a lot of effort for LED(Light Emitting Diode) at the time. This paper calculated the optimal subsidy for LED spread. For this purpose, it analyzed the impact on spread of the lighting appliances each subsidy level from BDM(Bass Diffusion Model) and predicted the number of lighting appliances according to subsidy level in the future. The case study is calculated susidy for satisfaction of LED target using the suggested model in the future and verified availability.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.129-132
• /
• 2005

Outdoor lighting is an important factor of urban scape. As a night image of the city, outdoor lighting acts important roles. Cities of developed countries have already had night images of their cites. About this, government is encouraging outdoor lighting of building by various ways. However, in present, outdoor lighting of headquarter buildings was not activated more than that of public buildings in our country. From this point of view, this paper presents a method to measure outdoor lighting effects as quantitative aspects for outdoor lighting activation. Presented the method of outdoor lighting effects is difficult to apply all buildings. Therefore, this paper limits the target to the headquarter buildings.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.121-126
• /
• 1999

In this paper, to bring under robust and accurate control of auto-equipment systems which disturbance, parameter alteration of system, uncertainty and so forth exist, neural network controller called dynamic neural processor(DNP) is designed. In order to perform a elaborate task like as assembly, manufacturing and so forth of components, tracking control on the trajectory of power coming in contact with a target as well as tracking control on the movement course trajectory of end-effector is indispensable. Also, the learning architecture to compute inverse kinematic coordinates transformations in the manipulator of auto-equipment systems is developed and the example that DNP can be used is explained. The architecture and learning algorithm of the proposed dynamic neural network, the DNP, are described and computer simulations are provided to demonstrate the effectiveness of the proposed learning method using the DNP.