• The Korean Journal of Petroleum Geology
• /
• v.11 no.1 s.12
• /
• pp.9-17
• /
• 2005

In the main target area of the block II, Targe-scale faults occur below the unconformity developed around 1 km in depth. The contrast of seismic velocity around the unconformity is generally so large that the strong multiples and the radical velocity variation would deteriorate the quality of migrated section due to serious distortion. More than 15 kinds of data processing techniques have been applied to improve the image resolution for the structures farmed from this active crustal activity. The bad and noisy traces were edited on the common shot gathers in the first step to get rid of acquisition problems which could take place from unfavorable conditions such as climatic change during data acquisition. Correction of amplitude attenuation caused from spherical divergence and inelastic attenuation has been also applied. Mild F/K filter was used to attenuate coherent noise such as guided waves and side scatters. Predictive deconvolution has been applied before stacking to remove peg-leg multiples and water reverberations. The velocity analysis process was conducted at every 2 km interval to analyze migration velocity, and it was iterated to get the high fidelity image. The strum noise caused from streamer was completely removed by applying predictive deconvolution in time space and ${\tau}-P$ domain. Residual multiples caused from thin layer or water bottom were eliminated through parabolic radon transform demultiple process. The migration using curved ray Kirchhoff-style algorithm has been applied to stack data. The velocity obtained after several iteration approach for MVA (migration velocity analysis) was used instead or DMO for the migration velocity. Using various testing methods, optimum seismic processing parameter can be obtained for structural and stratigraphic interpretation in the Block II, Yellow Sea Basin.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.579-587
• /
• 2015

The purpose of this study is to investigate how Korean learners perceive English vowels and further to test SLM which claims that new L2 vowel categories are more easily acquired than similar L2 vowel categories. Twenty Korean learners participated in English-to-Korean mapping test and English vowel identification test with target vowels /i, ɪ, u, ʊ, ɛ, æ/. The result revealed that Korean participants mapped the English pairs /i/-/ɪ/ and /u/-/ʊ/ onto single Korean vowel /i/ and /u/, respectively. in addition, both of English /ɛ/ and /æ/ were simultaneously mapped onto Korean /e/ and /ɛ/. This indicated that the Korean participants seemed to have perceptual difficulty for the pairs /i-ɪ/, /u-ʊ/, and /ɛ-æ/. The result of the forced-choice identification test showed that the accuracy of /ɪ, ʊ, æ/(ɪ: 81.3%, ʊ: 62.5%, æ: 60.0%) was significantly higher than that of /i, u, ɛ/(i: 28,8%, u: 28.8%, ɛ: 32.4%). Thus, the claim of SLM is confirmed given that /ɪ, ʊ, æ/ are new vowel categories whereas /i, u, ɛ/ are similar vowel categories. Further, the conspicuously low accuracy of the similar L2 vowel categories /i, u, ɛ/ was accounted for by over-generalization whereby the Korean participants excessively replaced L2 similar /i, u, ɛ/ with L2 new /ɪ, ʊ, æ/ as the participants were learning the L2 new vowel categories in the process of acquisition. Based on the findings this study, pedagogical suggestions are provided.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2005.04a
• /
• pp.59-63
• /
• 2005

Respiration motion causes movement of internal structures in the thorax and abdomen, making accurate delivery of radiation therapy to tumors in those areas a challenge. Accounting for such motion during treatment, therefore, has the potential to reduce margins drawn around the clinical target volume (CTV), resulting in a lower dose to normal tissues (e.g., lung and liver) and thus a lower risk of treatment induced complications. Among the techniques that explicitly account for intrafraction motion are breath-hold, respiration gating, and 4D or tumor-tracking techniques. Respiration gating methods periodically turn the beam on when the patient's respiration signal is in a certain part of the respiratory cycle (generally end-inhale or end-exhale). These techniques require acquisition of some form of respiration motion signal (infrared reflective markers, spirometry, strain gauge, thermistor, video tracking of chest outlines and fluoroscopic tracking of implanted markers are some of the techniques employed to date), which is assumed to be correlated with internal anatomy motion. In preliminary study for the respiratory gating radiation therapy, we performed to measurement of this respiration motion signal. In order to measure the respiratory motion signals of patient, respiration measurement system (RMS) was composed with three sensor (spirometer, thermistor, and belt transducer), 4 channel data acquisition system and mobile computer. For two patients, we performed to evaluation of respiratory cycle and shape with RMS. We observed under this system that respiratory cycle is generally periodic but asymmetric, with the majority of time spent. As expected, RMS traced patient's respiration each other well and be easily handled for application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6475-6482
• /
• 2015

The purpose of the study was two folded: to examine whether form-focused instruction (FFI) with corrective feedback (CF) is effective for the acquisition of the target linguistic forms and to find out the extent to which of the students' perceptions as well as their attitudes towards English instruction that they received. Tests and questionnaires were implemented to 122 Korean EFL students from eight classes enrolled in an English communication course. They were randomly assigned to three groups: the input-based group, who received typographical input enhancement materials, so-called the TIE group, the output-based group, who performed dictogloss tasks, so-called the DICT group, and the control group (CG). The data analysis was made on both tests and questionnaires by using SPSS 21.0 for Windows. The study found that different types of FFI with CF contributed to the improvement of students' grammatical knowledge and both the TIE and DICT task group students positively changed their perceptions and understanding as well as their attitudes towards the English instruction given, and students in all groups preferred pair work activities. In addition, most of the TIE and DICT students showed their interest and satisfaction with English class, whereas the CG group students did not. Based on the findings, this study suggested that well-planned and properly-chosen FFI in the form of pair work activities should be applied in classrooms with consideration of students' instructional preference in Korean EFL contextual settings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.638-643
• /
• 2017

The 3D laser scanner operates by measuring the distance from the sensor to the target and operates on the same principle as Electronic Distance Measuring (EDM). Recently, 3D laser scanning technology has been rapidly developed in line with the strongly increasing demand for 3D information acquisition. Therefore, it is now possible to more easily acquire geometric information of various objects existing in real space. In this study, we constructed geospatial information by using new equipment which integrated 3D laser scanner and total station, and we suggest the possibility of using new technology for geospatial information construction by comparing and analyzing with existing methods. In the study result, we demonstrated the efficiency of the geospatial information constructed by integration of 3D laser scanner and total station. The proposed method is expected to shorten the time required for data acquisition compared to the existing method using the existing total station. Furthermore, it is possible to use various methods such as cross section analysis and volume calculation using the acquired data. In the future, spatial information construction by integration of 3D laser scanner and total station will help improve work efficiency in related fields.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.213-222
• /
• 2008

Although hyperspectral sensing data have shown great potential to derive various surface information that is not usually available from conventional multispectral image, the acquisition of proper hyperspectral image data are often limited. To use ground-based hyperspectral camera image for remote sensing studies, radiometric calibration should be prerequisite. The objective of this study is to develop radiometric calibration procedure to convert image digital number (DN) value to surface reflectance for the 120 bands ground-based hyperspectral camera. Hyperspectral image and spectral measurements were simultaneously obtained from the experimental target that includes 22 different surface materials of diverse spectral characteristics at wavelength range between 400 to 900 nm. Calibration coefficients to convert image DN value to at-sensor radiance were initially derived from the regression equations between the sample image and spectral measurements using ASD spectroradiometer. Assuming that there is no atmospheric effects when the image acquisition and spectral measurements were made at very close distance in ground, we were also able to derive calibration coefficients that directly transform DN value to surface reflectance. However, these coefficients for deriving reflectance values should not be applied when the camera is used for aerial image that contains significant effect from atmosphere and further atmospheric correction procedure is required in such case.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.31-37
• /
• 2008

At present, the target amount of demand-side management and investment cost of EE (Energy Efficiency) program, which consists of high-efficiency appliances, has been estimated simply by the diffusion function based on the real historical data in the past or last year. In the internal and external condition, the penetration amount of each appliance has been estimated by Bass diffusion model which is expressed by time and three coefficients. And enough acquisition of real historical data is necessary for reasonable estimation of coefficients. In energy efficiency, to estimate the target amount of demand-side management, the penetration amount of each appliance should be primarily forecasted by Bass diffusion model in Korea. On going programs, however, lightings, inverters, vending machine and motors have a insufficient real historical data which is a essential condition to forecast the penetration amount using a Bass diffusion model due to the short period of program progress. In other words, the forecast of penetration amount may not be exact, so that it is necessary for the method of forecast to apply improvement of method. In this paper, the penetration amount of high-efficiency appliances is forecasted by Bass, virtual Bass, Logistic and Lawrence & Lawton diffusion models to analyze the diffusion progress. And also, by statistic standards, each penetration is compared with historical data for model suitability by characteristic of each appliance. Based on the these result, in the forecast of penetration amount by diffusion model, the reason for error occurrence caused by simple application of diffusion model and preferences of each diffusion model far a characteristic of data are analyzed.

• Journal of Intelligence and Information Systems
• /
• v.15 no.1
• /
• pp.51-64
• /
• 2009

A location tracking sensor such as GPS, INS, Radar, and optical equipments is used in tracking Maneuvering Targets with a multi-sensor, and such systems are used to track, detect, and control UAV, guided missile, and spaceship. Until now, Most of the studies related to tracking Maneuvering Targets are on fusing multiple Radars, or adding a supplementary sensor to INS and GPS. However, A study is required to change the degree of application in fusions since the system property and error property are different from sensors. In this paper, we perform the error analysis of the sensor properties by adding a ground radar to GPS and INS for improving the tracking performance by multi-sensor fusion, and suggest the tracking algorithm that improves the precision and stability by changing the sensor probability of each sensor according to the error. For evaluation, we extract the altitude values in a simulation for the trajectory of UAV and apply the suggested algorithm to carry out the performance analysis. In this study, we change the weight of the evaluated values according to the degree of error between the navigation information of each sensor to improve the precision of navigation information, and made it possible to have a strong tracking which is not affected by external purposed environmental change and disturbance.

• Journal of KIISE:Software and Applications
• /
• v.37 no.12
• /
• pp.892-908
• /
• 2010

Services in SOA are typically perceived as black-box to service consumers, and can be dynamically evolved at runtime, and run on a number of unknown and heterogeneous environments. Because of these characteristics of the services, effective and efficient monitoring of various aspects on services is an essential functionality for autonomous management of service. But the problem with or limitation in conventional or existing approaches is, that they focus on services themselves, ignoring the effects by business processes. Consequently, there is a room for service monitoring which provides more useful information of business level by acquisition of only external monitoring data that depend on specific BPEL engine and middleware. Moreover, there is a strong demand to present effective methods to reduce monitoring overhead which can degrade quality of services. EDA can cope with such limitations in SOA by collecting and analyzing events efficiently. In this paper, we first describe EDA benefits in service monitoring, and classify monitorring target, and present an appropriate monitoring method for each monitoring target. Also to provide the applicability of our approach, an event meta-model is defined, and event processing model and architecture based on the meta-model are proposed. And, with the proposed architecture and method, we implement a prototype of an event-driven dynamic monitoring framework which can collect and process internal and external data at runtime. Finally, we present the result of a case study to demonstrate the effectiveness and applicability of the proposed approach.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.113-122
• /
• 1990

After four years of planning, equipment acquisition, facility construction and beam testing, the KCCH cyclotron facility was put into operation in November1986. Now the KCCH cyclotron(MC-50) has been used for four years in neutron therapy and radioisotope production. Up to December 1989, 179(1852 sessions) patient have undergone neutron therapy. Radioisotope production for nuclear medicine use was started from March 1989 after extensive work to overcome target transport, target melting, beam diagnostic and chemical processing problems. This status report introduces the cyclotron facility, and the experiences of neutron therapy and isotope production with the MC-50 cyclotron. Besides, the operation results and the general troubles of the MC-50 during 1989 are summarized. Total operation time was 1252.5 hours. Four hundred hours were used for neutron therapy of 599 treatment sessions and 832.5 hours for radioisotope production. Total amount of produced raioisotope was 1695 mCi(Ga-67 : 1478mCi, Tl-201 : 107 mCi, I-123 : 25mCi, In-111 : 85mCi). Twenty hours were used for scheduled beam testing. In 1989, 882% of the planned operation were performed on schedule and this rats is improved remarkably compared to 71.0% in 1988.