• 통합자연과학논문집
• /
• 제10권1호
• /
• pp.27-32
• /
• 2017

In this paper we consider the two tangent lines of isogonal and isotomic conjugates of the line at both vertices of a given triangle. We find the necessary and sufficient condition for the two tangent lines of isogonal or isotomic conjugates of the line at both vertices and the median line to be concurrent. We also prove that every line whose isogonal conjugate tangent lines at both vertices are concurrent with the median line intersects at a unique point. Moreover, we show that the three intersection points correspond to the vertices of triangle are collinear.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.349-352
• /
• 2006

The plastic deformation of polycrystalline materials is induced by changes of the microstructure when the loading is beyond the critical state of stress. Constitutive models for the crystal plasticity have the common objective which relates microscopic single crystals in the crystallographic texture to the macroscopic continuum point. In this paper, a new consistent tangent stiffness for the anisotropic elasto-viscoplastic analysis of polycrystalline deformation is developed, which can be used in the finite element analysis for the slip-dominated large deformation of polycrystalline materials. In order to calculate the consistent tangent stiffness, the state function is defined based on the consistency condition between the elastic and plastic stress. The rate of shearing increment($\Delta{\gamma}^{\alpha}$) is calculated with satisfying the consistency condition. The consistency condition becomes zero when the trial resolved shear stress($\tau^{{\alpha}^*}$) becomes resolved shear stress($\tau^{\alpha}$) at every step. Iterative method is utilized to calculate the rate of shearing increment based on the implicit backward Euler method. The consistent tangent stiffness can be formulated by differentiating the rate of shearing increment with total strain increment after the instant rate of shearing increment converges. The proposed tangent stiffness is applied to the ABAQUS/Standard by implementing in the ABAQUS/UMAT.

• Structural Engineering and Mechanics
• /
• 제44권1호
• /
• pp.61-72
• /
• 2012

The paper is on contact analysis of a spherical ball with a deformable flat, considering the effect of tangent modulus on the contact parameters of a non-adhesive frictionless elastic-plastic contact. The contact analysis of this model has been carried out using analysis software Ansys and Abaqus. The contact parameters such as area of contact between two consecutive steps, volume of bulged material are evaluated from the formulated equations. The effect of the tangent modulus is considered for determining these parameters. The tangent modulus are accounted between 0.1E and 0.5E of materials E/Y value greater than 500 and less than 1750. Result shows that upto an optimal tangent modulus values the elastic core push up to the free surface in the flat. The simulation is also carried out in Abaqus and result provide evidence for the volume of bulged material in the contact region move up and flow into the free surface of the flat from the contact edge between the ball and flat. The strain energy of the whole model is varied between 20 to 40 percentage of the stipulated time for analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.299-299
• /
• 2010

In this study, microwave properties with compositions and frequency of the $Ba_3Co_2Fe_{24}O_{41}$ ceramics with Zn substitution for Co were investigated. From the XRD patterns, hexagonal structure of Z-type phase was existed as main phase. Diffraction peaks of Z-type phase were shifted to lower angle by Zn substituted for Co site. The permittivity was increased with Zn additions. In all composition, loss tangent of permittivities were increased with frequency. Permeability and magnetic resonance frequency were increased with Zn additions. Permeability was increased and loss tangent of permeability was decreased rapidly over 600 MHz~800 MHz. The loss tangent of permeability did not changed with composition ratio. In the case of $Ba_3Co_{1.6}Zn_{0.4}Fe_{24}O_{41}$ ceramics sintered at $1250^{\circ}C$ for 3 hours, the permittivity, loss tangent of permittivity, permeability and loss tangent of permeability were 28.277, 0.193, 22.992 and 0.065 at 310 MHz, respectively.

• 한국공간구조학회논문집
• /
• 제18권1호
• /
• pp.127-134
• /
• 2018

This study suggests the tangent modulus $E_t$ associated with partially yielded section of steel member under axially compressed. The provisions for column strength does not provide a information about failure mode of structural system. So, designers can not evaluate that a failure comes from member buckling or material yielding. The material of the axially compressed column under inelastic behavior reaches yielding point before the axial force renders the column bent. If axial members yields not by buckling effect but gradually yielding effect of material, the design code should accept related tangent modulus Et which is based on gradual yielding effect of material. This study provides the new effective tangent modulus $E_t$ derived in the case that residual stress is 30 percent and 50 percent of yielding stress respectively. The study considers idealized I section of steel which ignores web and general I section of steel with web respectively and makes conclude that tangent modulus $E_t$ with idealized I section of steel is rational.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제24권3호
• /
• pp.627-658
• /
• 2010

접선의 개념은 수학에서 매우 중요하다. 그러나 대학생들조차 미분가능과 접선의 존재를 동일시하는 등 접선의 중요성과 개념에 대해 혼란스러워하고 있다. 이런 관점에서 본 논문에서는 선행연구를 창조하고 초, 중, 고교의 교과서와 교육과정을 분석하여 접선개념의 도입 등을 분석하고 Lakatos 이론과 GSP를 이용한 접선지도방법과 실제 학교현장에서 사용할 수 있는 학습지도안을 제시하고, 현장적용 및 교수실험결과를 소개한다.

• 대한수학회지
• /
• 제48권2호
• /
• pp.329-340
• /
• 2011

We shall give some curvature conditions for the unit tangent sphere bundle of an n($\geq$ 4)-dimensional Riemannian manifold to be H-contact. Furthermore, we provide an example illustrating Main Theorem.

• 대한수학회논문집
• /
• 제35권3호
• /
• pp.1019-1035
• /
• 2020

In this paper, we introduce the deformed-Sasaki metric on the tangent bundle TM over an m-dimensional Riemannian manifold (M, g), as a new natural metric on TM. We establish a necessary and sufficient conditions under which a vector field is harmonic with respect to the deformed-Sasaki Metric. We also construct some examples of harmonic vector fields.

• 대한수학회지
• /
• 제48권1호
• /
• pp.133-146
• /
• 2011

We employ a hyperbolic tangent function to construct nonlinear transformations which are useful in numerical evaluation of weakly singular integrals and Cauchy principal value integrals. Results of numerical implementation based on the standard Gauss quadrature rule show that the present transformations are available for the singular integrals and, in some cases, give much better approximations compared with those of existing non-linear transformation methods.

• 대한수학회지
• /
• 제46권6호
• /
• pp.1267-1276
• /
• 2009

This paper presents a method for approximation of the standard normal distribution by using hyperbolic tangent based functions. The presented approximate formula for the cumulative distribution depends on one numerical coefficient only, and its accuracy is admissible. Furthermore, in some particular cases, closed forms of inverse formulas are derived. Numerical results of the present method are compared with those of an existing method.