• 제목/요약/키워드: tandem

검색결과 1,589건 처리시간 0.024초

Asymptotics in Load-Balanced Tandem Networks

  • Lee, Ji-Yeon
    • Journal of the Korean Data and Information Science Society
    • /
    • 제14권3호
    • /
    • pp.715-723
    • /
    • 2003
  • A tandem network in which all nodes have the same load is considered. We derive bounds on the probability that the total population of the tandem network exceeds a large value by using its relation to the stationary distribution. These bounds imply a stronger asymptotic limit than that in the large deviation theory.

  • PDF

고속선 운항 안정성을 위한 수중익 배치 및 종모멘트 특성에 관한 실험적 연구 (Experimental Study on Hydrofoil Arrangement and Longitudinal Moment Characteristics for Navigation Safety of High Speed Craft)

  • 박화평;김상현;임근남
    • 해양환경안전학회지
    • /
    • 제20권4호
    • /
    • pp.443-450
    • /
    • 2014
  • 본 연구에서는 수중익 배치와 종모멘트 특성이 전몰형 수중익선의 종방향 운동 안정성에 미치는 영향에 대하여 Tandem 수중익 모형의 시험을 통하여 고찰한다. 먼저, Canard 날개배치를 가지는 Tandem 수중익 모형을 제작하고 수중익의 양력 및 항력 계측 실험을 수행하여 양력 및 항력 특성을 평가하였다. 또한 종방향 운동의 초기 안정성과 자기 안정성을 가지는 Tandem 수중익 모형의 날개 배치를 결정하였다. Tandem 수중익 모형의 종안정성 시험에서는 선수 및 선미 수중익의 종방향 간격 변화와 종모멘트의 자기안정성 변화에 따른 Pitch 및 Heave 운동 특성, 익주 상태의 종안정성을 평가하였다. 먼저, Canard 날개배치를 가지는 Tandem 수중익 모형을 제작하고 수중익의 양력 및 항력 계측 실험을 수행하여 양력 및 항력 특성을 평가하였다. 또한 종방향 운동의 초기 안정성과 자기 안정성을 가지는 Tandem 수중익 모형의 날개 배치를 결정하였다. Tandem 수중익 모형의 종안정성 시험에서는 선수 및 선미 수중익의 종방향 간격 변화와 종모멘트의 자기안정성 변화에 따른 Pitch 및 Heave 운동 특성, 익주 상태의 종안정성을 평가하였다. 실험 수행 결과 본 연구의 주요 결론의 다음과 같다. 종 모멘트 자기 안정성이 클수록 주어진 고정 pitch 각에서 pitch운동에 대한 자기안정성이 높다. 다음 종모멘트 자기 안정성이 클수록, pitch각도 변화에 따른 pitch운동 및 heave운동의 변동 폭이 상대적으로 작으며 종방향 안정성이 우수하다. 마지막으로 종모멘트 자기안정성이 클수록, 수중익 양력이 동일한 경우, Tandem 수중익의 안정적인 익주를 위해서는 충분한 종모멘트의 자기안정성을 확보하는 것이 필수적인 것을 시험을 통하여 확인하였다.

CGL의 재료에 따른 청색 형광 Tandem OLED의 발광 특성 (Emission Characteristics of Blue Fluorescence Tandem OLED with Materials of CGL)

  • 곽태호;주성후
    • 한국표면공학회지
    • /
    • 제47권4호
    • /
    • pp.210-214
    • /
    • 2014
  • We investigated emission characteristics of tandem organic light emitting devices (OLEDs) with p-type materials as charge generation layer. The tandem OLEDs were fabricated by using $MoO_x$, $WO_x$, C60 and HATCN as p-type material or not using p-type material for charge generation. When HATCN was used as p-type material, it showed high current density at low applied voltage, but increase of efficiency was small because of charge unbalance in emitting layer. In case of tandem OLED not using p-type material, applied voltage increased remarkably because of difficulty of hole injection. In case of $MoO_x$, $WO_x$ or C60 as p-type material, current emission efficiency increased greatly. In particular, current emission efficiency of tandem OLED using $MoO_x$ as p-type material increased up to 3 times than current emission efficiency of single OLED. The Commission Internationale de l'Eclairage (CIE) 1931 color coordinates were changed by overlapping of 504 nm emission wavelength. As a result, emission efficiency of tandem OLED improved compared with single OLED, but driving voltage also increased by increase of organic layer thickness.

강인한 음성 인식을 위한 탠덤 구조와 분절 특징의 결합 (Combination Tandem Architecture with Segmental Features for Robust Speech Recognition)

  • 윤영선;이윤근
    • 대한음성학회지:말소리
    • /
    • 제62호
    • /
    • pp.113-131
    • /
    • 2007
  • It is reported that the segmental feature based recognition system shows better results than conventional feature based system in the previous studies. On the other hand, the various studies of combining neural network and hidden Markov models within a single system are done with expectations that it may potentially combine the advantages of both systems. With the influence of these studies, tandem approach was presented to use neural network as the classifier and hidden Markov models as the decoder. In this paper, we applied the trend information of segmental features to tandem architecture and used posterior probabilities, which are the output of neural network, as inputs of recognition system. The experiments are performed on Auroral database to examine the potentiality of the trend feature based tandem architecture. From the results, the proposed system outperforms on very low SNR environments. Consequently, we argue that the trend information on tandem architecture can be additionally used for traditional MFCC features.

  • PDF

Thin Film Si-Ge/c-Si Tandem Junction Solar Cells with Optimum Upper Sub- Cell Structure

  • Park, Jinjoo
    • Current Photovoltaic Research
    • /
    • 제8권3호
    • /
    • pp.94-101
    • /
    • 2020
  • This study was trying to focus on achieving high efficiency of multi junction solar cell with thin film silicon solar cells. The proposed thin film Si-Ge/c-Si tandem junction solar cell concept with a combination of low-cost thin-film silicon solar cell technology and high-efficiency c-Si cells in a monolithically stacked configuration. The tandem junction solar cells using amorphous silicon germanium (a-SiGe:H) as an absorption layer of upper sub-cell were simulated through ASA (Advanced Semiconductor Analysis) simulator for acquiring the optimum structure. Graded Ge composition - effect of Eg profiling and inserted buffer layer between absorption layer and doped layer showed the improved current density (Jsc) and conversion efficiency (η). 13.11% conversion efficiency of the tandem junction solar cell was observed, which is a result of showing the possibility of thin film Si-Ge/c-Si tandem junction solar cell.

피스톤 펌핑 위상이 텐덤형 사판식 액셜 피스톤 펌프의 진동, 소음에 미치는 영향에 관한 연구(2) (A Study on Effects of Piston Pumping Phase on Vibration and Noises of Tandem Swash Plate Type Axial Piston Pump(2))

  • 박성환;이진걸
    • 한국정밀공학회지
    • /
    • 제16권12호
    • /
    • pp.31-39
    • /
    • 1999
  • Previous researches and experiments have already verified that the primary noise source of high pressure tandem axial thpe piston pump is fluid-borne noise from the process of oil distribution between the kidney-shaped port and valve plate. So, many researchers have improved pressure gradients and reduced sound levels by applying pre-compression and pre-decompression metering grooves to valve plate. In practice however, the sound level of th high pressure tandem axial type piston pump is still undesirable. This paper testified the effect of pumping phase of the piston on vibration and noise of th high pressure tandem axial type piston pump on the best of theoretical research in $this^(1)$. Therefore considering the pumping phase of the piston when assembling the tandem axial type piston pump, it is possible to reduce 1.5~2[dB]of sound level.

  • PDF

High-Performance liquid Chrmatogrphic and Tandem Mass Spectrometric Quantitation of N7-Methyldeoxyguanosin in Methylated Calf Thymus DNA

  • Chae, Whi-Gun
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제5권3호
    • /
    • pp.191-195
    • /
    • 2000
  • Quantitation of N7-methyldeoxyguanosine (N7-MedG) produced in the in vitro N-methly-N-nitrosuourea (NMU) action on thymus DNA has been achieved by enzymatic degradation, liquid chromatoraphic separaphic separation and desorption chemical ionization tandem mass spectrometry. In conjunction with the resolving power HPLC in the separation of isomers, desorprion chemical ionization tandem mass spectrometry has utilized in determining modified nucleosides at low levels using a stable-isotope labled compound as an internal reforence. The quantitative estimation of N7-methyldeoxyguanosine was previously established by an independent HPLC analysis of methylated calf thymus DNA. A sensitive and specific methodogy for the quantitation of N7-MedG at the picomole level using HPLC combined with tandem mass spectrometry without radioisotope labeling process is presented. The potential of the liquid chromatoraphic tandem mass exposure to methlation agents in vitro.

  • PDF

피스톤 펌핑 위상이 텐덤형 사판식 액셜 피스톤 펌프의 진동 ${\cdot}$ 소음에 미치는 영향에 관한 연구(1) (A Study on Effects of Piston Pumping Phase on Vibration and Noises of Tandem Swash Plate Type Axial Piston Pump(1))

  • 박성환;이진걸
    • 한국정밀공학회지
    • /
    • 제16권5호통권98호
    • /
    • pp.74-82
    • /
    • 1999
  • To meet the needs of the hydraulic excavator of large capacity, tandem axial type piston pump which is high pressure and high speed have been developed. But inevitably we can not help facing the problem of noise at that time. In order to reduce the noise of this pump, many researchers have been studying the problem of oil distribution manner. But they are not interested in the symmetric structure of tandem type pump. So, focusing on the symmetric structure of tandem type pump, this paper analyzed unbalanced force developed in the pump chamber and verified the effect of the pumping phase of the piston on vibration and noise of the tandem axial type piston pump theoretically.

  • PDF

원형 및 사각형 단면 형상을 가진 tandem 실린더의 gap flow 유동현상 규명에 관한 연구 (Comparison of gap flows between tandem cylinders having circular and square sections)

  • 정성용;박한욱
    • 한국가시화정보학회지
    • /
    • 제18권2호
    • /
    • pp.39-45
    • /
    • 2020
  • Problems related with flows around structures are typical in various engineering fields. The characteristics of these flow structures depend strongly on the shape of the body. The flow regime around square cylinders which are also employed in various applications has also been investigated. In addition to a single body, flows past closely spaced structures arranged in tandem are observed in numerous practical applications. In this study, the flow characteristics around the circular and the square cylinder were investigated according to S/D. The velocity fields and Reynolds stress of the single cylinders were acquired to explain the flow behaviors between tandem cylinders. The differences observed in the flow behaviors of square and circular cylinders were studied. The flow patterns around two tandem cylinders can be classified into three types of wake interference behaviors according to S/D. This is related with the flows between cylinders.

PRESENT AND FUTURE OF SUPER HIGH-EFFICIENCY TANDEM SOLAR CELLS

  • Yamaguchi, Masafumi
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제11권11호
    • /
    • pp.37-45
    • /
    • 1998
  • In this paper, present status of super high-efficiency tandem solar cells has been reviewed and key issues for realizing super high-efficiency have also been discussed. In addition, the terretrial R&D activities of tandem cells, in the New Sunshine Program of MITI(Ministry of International Trade and Industry) and NEDO(New Energy and Industrial Technology Development Organization) in Japan are reviewed briefly. The mechanical stacked 3-junction cells of monolithically grown InGaP/GaAs 2-junction cells and InGaAs cells have reached the highest efficiency achieved in Japan of 33.3% at 1-sun AM1.5. This paper also reports high-efficiency InGaP/GaAs 2-junction solar cells with a world-record efficiency of 26.9% at AM0, 28$^{\circ}C$ and radiation damage recovery phenomena of the tandem cell performance due to minority-carrier injection under light illumination or forward bias, which causes defect annealing in InGaP top cells. Future prospects for realizing super-high efficiency and low-cost tandem solar cells are also described.

  • PDF