• 한국터널지하공간학회 논문집
• /
• 제10권4호
• /
• pp.361-369
• /
• 2008

지중터널은 대부분 지하수위 하부에 위치하므로 지하수 처리문제는 터널의 장기운영에 있어 매우 중요하다. 배수형터널의 경우 수리기능이 원활하면 라이닝에 수압이 작용하지 않으나 장기 운영으로 인해 배수시스템의 열화가 진행되면서 라이닝 배면에 설계 시 고려하지 않았던 간극수압이 작용하게 되는데, 이를 잔류수압이라 한다. 잔류수압은 피에조미터로 그 측정이 가능하나 이는 라이닝 및 배수시스템을 훼손할 염려가 있어 부적합하기 때문에 라이닝을 손상시키지 않으면서 작용수압을 평가할 수 있고, 운영 중 라이닝의 건전도 평가(health monitoring) 시 수압상태의 파악이 가능한 비파피 예측기법이 요구된다. 본 논문에서는 이론적 및 수치해석적 방법을 사용하여 운영 중 터널에 작용하는 간극구압(잔류수압) 예측기법을 제시하였으며, 본 해석방법을 이용하면 비파괴 방법으로 라이닝에 작용하는 간극수압의 파악이 가능하다. 제안된 방법은 이론적 예측기법과 수치해석 결과인 정규화 간극수압 분포곡선과를 병용함으로써 터널 운영단계에서의 잔류수압에 대한 안정성 검토에 유용하게 활용될 수 있다.

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.172-181
• /
• 2022

Objectives: In order to reduce the burden on employers and increase the reliability of measurement results, improvements to the provisions related to the work environment measurement reporting system, such as the current Occupational Safety and Health Act and its Enforcement Rules, are planned. This study aimed to suggest improvements for the work environment measurement reporting system through a survey and Delphi investigation. Method: This survey included workplaces (health managers), national institutions (the Ministry of Employment and Labor) that use the results of the work environment measurement reporting system for policy and supervision purposes, and work environment measurement institutions that enter the results were included. In addition to the survey, we tried to derive results through meetings with stakeholders and expert advisory meetings. Results: It is difficult to abolish or partially improve the reporting system under the Enforcement Regulations of the Occupational Safety and Health Act at this point because the opinions of workplaces, supervisory agencies, and measuring agencies differ in terms of its intended purpose and use. In the case of high-exposure harmful factors (over 50% on the basis of exposure) in the "comprehensive opinion" described in the work environment measurement results table, it is necessary to insert unit of work with exposed harmful factors, exposure factors, and current conditions in checklists or tables so that they can be reflected in government policies. In the case of workplaces that are feared to be highly exposed to substances subject to measurement, it seems desirable to improve them so that industrial health instructors registered with the Korea Safety and Health Agency or local labor offices can provide technical guidance. As an improvement plan to increase the reliability of data and the use of big data, it is necessary to improve the input method for processes and jobs. Conclusion: The laws and regulations of the work environment measurement reporting system are difficult to revise due to a lack of consensus among current stakeholders, but improvements can be achieved by improving the Ministry of Employment and Labor's notifications and other means. In addition, in order to effectively utilize the data from the K2B system, it is necessary to improve the input method for processes and jobs.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.395-400
• /
• 2017

본 논문에서는 산소 센서를 이용하여 CMAC 신경회로망 학습제어에 의한 차량의 연료분사 제어방법에 대해 논한다. 기본 차량 내연기관과 연료 분사 제어시스템의 동역학적인 비선형성으로 인하여 불연속적인 연로를 분사한다. 정밀 연료 분사량 제어에 어려움을 발생시키기 때문에 엔진성능은 저하된다. 본 연구에서는 CMAC 신경회로망을 이용한 연료 분사시스템을 제안한다. CMAC 신경회로망은 매우 넓은 범위의 함수로부터 비선형 관계를 학습 할 수 있고, 학습이 빠르며, 수렴 특성을 가지고 있다. 그리고 산소 센서의 출력특성을 파악하여 연료분사 속도를 계산해서 설정된 공연비 값을 유지시켜준다. 게다가 기존 가솔린 엔진의 구조변경이 없이 어떤 상황에서도 공연비를 정밀하게 제어할 수 있으며, 배기가스 배출량을 절감시킬 수 있다. 시뮬레이션을 통해 일반적인 차량의 제어 방법과 비교 분석하였고, 제안된 방법이 차량의 연비 향상과 친환경 성능 등에 더 효과적임을 확인하였다.

• 한국가스학회지
• /
• 제4권2호
• /
• pp.52-57
• /
• 2000

본 연구에서는 자료를 통한 국내 가스산업시설의 인적오류에 관한 산업재해를 분석하고 국외에서 발전된 정량화 방법을 이용하여 인적 오류 가능성을 예측할 수 있도록, 먼저 PIF(Performance Influencing Factor)분류구조를 바탕으로 보다 객관적이고 정확한 자료를 얻기 위해 평가 Sheet를 제시하였다. 그리고 평가 Sheet를 이용하여 가스산업시설의 인적 오류변수들을 평가하고, 평가 자료를 가지고 정량화 기법을 이용하여 HEP(Human Error Probability)를 산출하게 된다. 마지막으로, 보다 현장 작업자들이 편하고 쉽게 적용시킬 수 있도록 프로그램화를 시켰다. 본 연구의 결과로써 신뢰성 있는 인적오류 D/B를 구축함으로써 이를 공유할 수 있으며, 그리고 인간의 능률을 현저히 향상시킴과 동시에 인적오류감소 전략을 수립하는데 많은 도움이 될 것이다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.148-154
• /
• 2018

When shooting small arms, the inner surface temperature is heated up to about $700{\sim}1,000^{\circ}C$ by the friction of the bullet and the inner wall of the barrel and the combustion of propellant. High-temperature propellant gas and high-speed movement of the bullet cause corrosion of the inner wall, which is noticeable immediately in front of the chamber. In this study, the mechanical properties of Cr-Mo-V steel, which is the base material, were tested using Taguchi experimental design to find the best nitriding treatment conditions. For the nitriding process, the working time, salt bath temperature, and salt concentration were combined as three conditions and placed in the $L_9(3^4)$, orthogonal array table. The thicknesses of the white layer and the nitrogen diffusion layer were measured after nitriding under each condition in a salt bath furnace. Durability was evaluated by measuring the degree of dispersion through actual shooting because it was difficult to evaluate the mechanical properties of the cylinder inner structure. As a result, it was confirmed that the durability was optimal at $565^{\circ}C$, 1 hour, 0.5%. These optimal conditions were selected by the statistical analysis of the Minitab program(ver.17).

• 한국산림과학회지
• /
• 제76권3호
• /
• pp.193-199
• /
• 1987

임도시공예정지(林道施工豫定地)의 천공폭파에 따른 작업량(作業量)과 사업비(事業費)의 간이예측방법을 탐구하여 임도설계(林道設計)의 일반지침(一般指針)으로 활용하도록 하였다. 양양군 현남면 일대의 화강편마암지대에서 임도 5 km를 11개(個) 싸이클로 구분하여 20 m 측점단위별 산지경사를 조사하고 각 싸이클별 작업시간(作業時間) 재료량(材料量) 및 인력(人力)을 조사(調査)하였다. 분석결과(分析結果)에 의하면 산지경사(山地傾斜) 70% 이상(以上)인 사면(斜面)의 출현비율(出現比率)과 천공작업길이와의 상관성이 높아 이를 지표(指標)로 하여 작업량(作業量)을 추정(推定)하였다. 천공길이 총량을 추정할 수 있으면 공기압축기 가동시간(稼動時間) 착암인부수(人夫數) 및 소요(所要)화약량은 높은 상관성을 가지고 예측할 수 있다. 분석된 조사결과(調査結果)를 기초자료로 하여 산지경사(山地傾斜)에 따른 착암량과 이에 소요되는 기계 인력 및 재료량 추정치를 표(表) 5 와 같이 제시를 한다.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.99-103
• /
• 1998

The curved surface machined by plate end mill causes a excess non-cutting volume, in these cases ball end mill is used for the curved surfaces. This study is aimed to obtain the optimum cutting conditions of various cutting speed, table speed, tool diameter, radius of curvature roughness on the conditions of various cutting speed, tool diameter, radius of curvature when machining the curved surface using the ball end mill. After designing curve rates, obtaining NC data by CAD/CAM system through CC-Cartesian method and transferred the data through DNC system, we machined the specimens by the CNC machining center, The surface roughness of specimens was measured by surface roughness tester and CNC 3D coordinate measuring machine. The cutting condition were the same as follow velocity; 15, 20, 25 30m/min, feed rate;40, 60, 80, 100m/min and radius of curvature; 30,40,50,60mm, tool diameters; ø8, ø12, ø16, ø 20mm. Analizing the working results, we can acquire the optimum cutting condition of curved specimen at the cutting velocity of 20~25m/min and the feed rate of 80mm/min. As the same cutting condition the best surface roughness was showed at ø16mm of the tool diameter. But the tool diameter was smaller than ø8mm. we could improve for the surface roughness by controlling the cusp.

• 동아시아식생활학회지
• /
• 제27권1호
• /
• pp.29-40
• /
• 2017

The purpose of this study was to provide basic information for developing nutrition education programs for preschool children and their families. The subjects were 291 parents whose children went to daycare centers in Uiwang. The questionnaire contained 15 items for children's dietary habits and six items for parents' nutritional attitudes. The results of frequency analysis of children's dietary habits were as follows: 63.9% of children ate meals regularly, however breakfast (46.4%) was usually skipped; 44.0% of children ate a snack more than twice per day; 56.7% did not have late night meals; 49.5% ate out once to twice per week; 89.7% had dinner with family more than three times per week; and 43.6% had picky eating habits. The percentage of children who did not eat vegetables and seaweed was the highest among other food groups. Intake frequencies were low in fatty foods, instant foods, and fast foods. Some correlations were observed between picky eating habits and other dietary habits by cross-tabulation analysis. Intake frequency of non-picky eating children was lower for late night eating and fatty foods but higher for vegetables and seaweed compared to picky eating children. Parents answered that their nutritional knowledge level was normal (72.2%), and nutritional information was collected using the Internet (36.0%). Nutritional value was the most considered point in meal preparation of parents (43.3%), and the most difficult factor in child's diet management was lack of time due to working (36.1%). Parents cited method of creating a menu (27.0%) and table manners (25.3%) as topics of nutrition education by professionals. Therefore, various nutrition education programs need to be developed to improve healthy dietary habits for children and their families.

• Safety and Health at Work
• /
• 제14권1호
• /
• pp.66-70
• /
• 2023

Background: Online teaching and learning extend the duration of using gadgets such as mobile phones and tablets. A prolonged usage of these gadgets in a static position can lead to musculoskeletal disorders (MSD). Therefore, this study aims to identify the risk factors related to musculoskeletal symptoms while using gadgets during work from home due to the COVID-19 pandemic. Method: A cross-sectional survey with online-based questionnaires was collected from the University of Indonesia, consisting of lecturers, students, and managerial staff. The minimum number of respondents was 1,080 and was defined by stratified random sampling. Furthermore, the dependent variable was musculoskeletal symptoms, while the independent were age, gender, job position, duration, activity when using gadgets, and how to hold them. Result: Most of the respondents had mobile phones but only 16% had tablets. Furthermore, about 56.7% have used a mobile phone for more than 10 years, while about 89.7% have used a tablet for less than 10 years. A multivariate analysis found factors that were significantly associated with MSD symptoms while using a mobile phone, such as age, gender, web browsing activity, work, or college activities. These activities include doing assignments and holding the phone with two hands with two thumbs actively operating. The factors that were significantly associated with MSD symptoms when using tablets were gender, academic position, social media activity, and placing the tablet on a table with two actively working index fingers. Conclusion: Therefore, from the results of this study it is necessary to have WFH and e-learning policies to reduce MSD symptoms and enhance productivity at work.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.677-685
• /
• 2018

건설공사에서 공정관리는 기본적으로 가장 중요한 단계이며, 효율적인 공정관리를 위해서는 합리적 공정표 작성이 우선시 되어야 한다. 설계단계에서는 기상조건과 현장 특성을 고려한 다양한 조건과 공법의 비교 검토를 통해 최적의 공사 기간을 산정할 수 있으나, 기획단계에서 기본적인 자료(D/B) 분석만으로는 효율적 공법 선정과 적정한 공사 기간 산정이 어렵다. 따라서, 기획단계에서 기존시가지의 공동구 건설시 표준공기 분석을 위하여, 본 논문에서는 공동구 형식을 개착식 및 터널식으로 구분하고, 각 형식의 특성과 기존시가지의 조건을 고려한 공법을 선정 하도록 하였다. 합리적인 공기 계산을 위하여 외부 공사에 영향을 주는 기상조건을 고려하여 년 간 가동율을 산정 하였으며, 개착식은 RC 공법/터널식은 Shield TBM 공법에 대한 단위공정을 분석하였다. 각 단위공정을 종합하여 연장 1,200m, 환기구 200m 간격으로 가정한 공사의 표준공기를 산정한바, 개착식은 893일, 터널식은 616일이 소요되는 것으로 분석 되었다. 본 연구의 결과는 기획단계에서 보다 쉽게 공동구 형식 선정과 표준공기 산정에 도움이 될 것이며, 추후 설계단계에 연계하면 공정 및 공사비 산정이 용이할 것으로 판단된다.