• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.646-652
• /
• 2013

PRA(Position Reporting Accuracy) for EO/IR(Electro-Optic/Infrared) airborne camera is an important factor in geo-pointing accuracy. Generally, rate table is used to measure PRA of gimbal actuated camera like EO/IR. However, it is not always possible to fix an EUT(Equipment for Under Test) to rate table due to capacity limit of the table on the size and weight of the object(EUT). Our EO/IR is too big and heavy to emplace on it. Therefore, we propose a new verification method of PRA for airborne camera and assess the validity of our proposition. In this method we use collimator, angle measuring instrument, 6 dof motion simulator, optical surface plate, leveling laser, inclinometer and poster(for alignment).

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.184-189
• /
• 2006

In the process of accurate manufacture and measurement, it is necessarily required to isolate external or internal vibration due to external disturbance and internal actuators. The higher vibration isolation system gets damping around resonance, the better it is generally. This paper analyzes the performance of an existing passive air-spring for vibration isolation table by rising experiment and simulation. Optimal design for a passive air spring can be obtained by fluting the size of the orifice. Also design for an active isolation system is carried out by applying PID controller and considering non-linearity of pneumatic characteristics with help of look-up table. We have developed the act ive vibration isolation table wi th the bet ter isolation performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1471-1474
• /
• 2003

The correlation between the object function and the design parameter is shown on this paper by using the characteristic function for tile mixed result of the structure analysis. tile buckling analysis and the table of orthogonal array according to the original crane's dimensional change. About the above two object functions, the effective of design change according to the change of design parameters could be estimated. Also, the crane's weight is reduced up to 20.58 percent maintaining the structural stability according to the thickness of plate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.15-18
• /
• 2003

Flash memory becomes more important for its fast access speed, low-power, shock resistance and nonvolatile storage. But its native restrictions that have limited 1ifetime, inability of update in place, different size unit of read/write and erase operations need to managed by FTL(Flash Translation Layer). FTL has to control the wear-leveling, address mapping, bad block management of flash memory. In this paper, we focuses on the fast access to address mapping table and proposed the way of faster valid page search in the flash memory using the VPLT(Valid Page Lookup Table). This method is expected to decrease the frequency of access of flash memory that have an significant effect on performance of read and block-transfer operations. For the validations, we implemented the FTL based on Windows CE platform and obtained an improved result.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1995년도 추계학술대회논문집
• /
• pp.268-279
• /
• 1995

The purpose of this study is to suggest a brassiere sizing chart for elderly women. It is found that there is no direct linear relationship between cup size and under bust girth from the analsis of breast measurements. These 2 factors(under bust girth and cup size) were chosen as 2 axes of brassiere size chart. A loss function was used to determined intervals of bust girth and cup size of size chart, because the loss function introduces the concept of frequency to size chart for better customer's satisfaction. From the dual distribution table whose intervals had been determinde by a loss function. The 15 sizes, which had more than 2% of appearance were suggested for brassiere size chart. The suggested brassierc sizes covened 87.6% of all subjects. Considering that KS brassiere size thart consisting of 32 sizes covers 88.5%, the suggested brassiere size chart would be considered quite feasible. Also is suggested supply reference measurement chart relevant to brassiere manufacturing for 10 most frequent sizes.

• 한국의류학회지
• /
• 제24권7호
• /
• pp.1044-1055
• /
• 2000

The purpose of this study is to suggest sizing chart for a clean room wear. 3 control dimensions(Stature, Bust girth, B.N.P.∼Wrist point length) were chosen as 3 axes of clean room wear size chart. A loss function was used to determined intervals of stature, Bust girth and B.N.P.∼Wrist point length of size chart, because the loss function introduces the concept of frequency to size chart for better customer's size satisfaction. From the size table whose intervals had been determined by a loss function. The 4 sizes individually were suggested for clean room wear size chart by sex. The 3 sizes individually were suggested for clean room head cover size chart by sex too. The suggested size chart would be considered more feasible than present size chart. Also they are suggested supply reference measurement chart relevant to clean room wear manufacturing for 13 most frequent sizes.

• 한국컴퓨터정보학회논문지
• /
• 제6권1호
• /
• pp.74-81
• /
• 2001

본 논문에서는 ATM 스위치를 사용한 고속 라우터의 구조를 고찰하고 시뮬레이션을 통하여 고속ATM 라우터의 성능을 분석하였다. ATM 스위치를 사용한 고속 ATM 라우터는 플로우(flow)로 정의된 패킷에 대하여 라우터의 처리과정을 생략하고 ATM 스위치를 사용하여 IP 패킷을 처리하기 때문에 라우터의 부하를 줄일 수 있다. 성능 분석을 위한 시뮬레이션에서는 고속 ATM 라우터의 성능 파리미터인 라우팅 시간(routing time: RT), 플로우 테이블 크기 (flow table size : FS), 플로우 리스트 유지시간(flow live time: FT)과 입력 회선 효율을 변화시키면서 라우터의 버퍼 크기를 고찰하였다. 본 논문의 결과는 네트워크를 Upgrade 하거나 ATM 스위치를 이용하여 고속 ATM 라우터를 구현할 때 장비의 적합성을 분석할 수 있는 자료로 사용될 수 있다.

• 대한치과의사협회지
• /
• 제10권3호
• /
• pp.155-158
• /
• 1972

As a factor of dentistry, the form of the tooth especially the size plays an important part. And in orthodontics the relation between the tooth size, arch length and the basal arch is regarded important, and it is closely related to the extraction and retension probolem in treatment planning. The auther's study of the mesio-distal crown diameters of permanent teeth, width and length of the dental arch and basal arch from the cast of 50 men and 53 women who could be measured clerly, among 102 men and 107 women regarded as the normal occlusion showed the followings. 1. Table 1 and table 2 showed the measurement of the mesio-distal maximum width of the permanent teeth, width and length of the dental arch and basal arch of the upper and lower dentitions. 2. Men's mesio-distal width of the teeth, arch length and arch width of the upper and the lower dentition, basal arch width and basal arch length are larger than those of wonen's 3. We compared the Koreans with the American white. Upper central incisors, upper first molars and lower second premolars of the latter were larger than those of the former. And the Koreans's rest tooth of the rest were comparatively larger.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1441-1446
• /
• 2009

Numerical analysis is a powerful method in evaluating the soil-pile-structure interaction under the dynamic loading, and this approach has been applied to the practical area due to the development of computer technology. Finite Difference Method, one of the most popular numerical methods, is sensitive to the shape and the number of mesh. However, the trial and error approach is conducted to obtain the accurate results and the reasonable simulation time because of the lack of researches about mesh size and the number. In this study, FLAC 3D v3.1 program(FDM) is used to simulate the dynamic pile model tests, and the numerical results are compared with the 1G shaking table tests results. With the different size and shape of mesh, the responses of pile behavior and the simulation time are estimated, and the optimum mesh sizes in dynamic analysis of single pile is studied.

• 대한인간공학회지
• /
• 제15권2호
• /
• pp.1-13
• /
• 1996

The purpose of this study is to suggest a brassiere sizing chart for elderly women. 2 control dimensions(under bust girth and cup size) were chosen as 2 axes of brassiere size chart. A loss function was used to determined intervals of under bust girth and cup size of size chart, because the loss function introduces the concept of frequency to size chart for better customer's satisfaction. From the dual distribution table whose intervals had been determined by a loss function. The 15 sizs, which had more than 2% of appearance were suggested for brassiere size chart. The suggested brassiere sizes covered 87.6% of all subjects. Considering that KS brassiere size chart consisting of 32 sizes covers 88.5%, the suggested brassiere size chart would be considered quite feasible. Also it is suggested supply reference measurement chart relevant to brassiere manufacturing for 10 most frequent sizes.