• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.371-377
• /
• 2006

The purposes of this study were to assess the accuracy of measurements in pre-enlarged canals with small instruments and to compare the accuracies, in enlarged canal, with small size instruments and instruments that match the actual canal diameter using Root ZX, Bingo1020, SmarPex, and e-Magic Finder. Ten extracted teeth were embedded in an alginate model made for testing apex locators. A size 10 file was placed into the root canal until the tip of the file reached the plane of the major diameter of the foramen under a dental operating microscope at the 25 x magnification. The measurement was done with digital caliper and defined as actual length. Electronic length measurement with a size 10 file in pre-enlarged canal was done by reading the index indicating Apex of each device to gain a definite value After completion of canal enlargement to a size 45 file, each difference between actual length and electric measurement value with a size 10 and 40 files in enlarged canal was recorded as L10 and L40. The one-way ANOVA and Scheffe's multiple range tests were computed for analyze the differences among the four apex locators in the same group. The Student's t-test between L10 and L40 of each locator was done. The accuracies of electronic measurements were significantly different among the 4 devices. The file size made no difference on the accuracy of electronic measurement in enlarged canal with same device. The e-Magic Finder was the most accurate device among the 4 apex locators used in this study.

• Korean Journal of Cognitive Science
• /
• v.28 no.4
• /
• pp.315-328
• /
• 2017

Even though assessment using information and communication technology will most likely lead the future of educational assessment, there is little domestic research on this topic. Computerized assessment will not only cut costs but also measure students' performance in ways not possible before. In this context, this study introduces a tool which can overcome the problems of multiple choice tests, which are most widely used type of assessment in current Korean educational setting. Multiple-choice tests, in which options are presented with the questions, are efficient in that grading can be automated; however, they allow for students who don't know the answer, to find the correct answer from the options. Park(2005) has developed a modified multiple-choice testing system (CMMT) using the interactivity of computers, that presents questions first, and options later for a short time when the student requests for them. The present study was conducted to find out if penalizing wrong answers could lower the possibility of students choosing an answer among the options when they don't know the correct answer. 116 students were tested with the directions that they will be penalized for wrong answers, but not for no response. There were 4 experimental conditions: 2 conditions of high or low percentage of penalizing, each in traditional multiple-choice or CMMT format. The results were analyzed using a two-way ANOVA for the number of no response, the test score and self-report score. Analysis showed that the number of no response was significantly higher for the CMMT format and that test scores were significantly lower when the penalizing percentage was high. The possibility of applying CMMT format tests while penalizing wrong answers in actual testing settings was addressed. In addition, the need for further research in the cognitive sciences to develop computerized assessment tools, was discussed.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.581-588
• /
• 2019

MRI is superior when contrasted to help the organization generate artifacts resolution, but also affect the diagnosis and create a image that can not be read. Metal is inserted into the tooth, it is necessary to often be inhibited in imaging by causing the geometric distortion due to the majority and if the difference between the magnetic susceptibility of a ferromagnetic material or paramagnetic reducing them. The purpose of this study is to conduct a metal artefact in accordance with the analysis using a diamagnetic material. The magnetic material include a wire for the orthodontic bracket and a stainless steel was used as a diamagnetic material was used copper, zinc, bismuth. Testing equipment is sequenced using 1.5T, 3T was used was measured using a SE, TSE, GE, EPI. A self-produced phantom material was used for agarose gel (10%) to a uniform signal artifacts causing materials are stainless steel were tested by placing in the center of the phantom and cover inspection of the positive cube diamagnetic material of 10mm each length.After a measurement artefact artifact zone settings area was calculated using the Wand tool After setting the Low Threshold value of 10 in the image obtained by subtracting images, including magnetic material from a pure tool phantom images using Image J. Metal artifacts occur in stainless steel metal artifact reduction was greatest in the image with the bismuth diamagnetic materials of copper and zinc is slightly reduced, but the difference in degree will not greater. The reason for this is thought to be due to hayeotgi offset most of the susceptibility in bismuth diamagnetic susceptibility of most small ferromagnetic. Most came with less artifacts in image of bismuth in both 1.5T and 3T. Sequence-specific artifact reduction was most reduced artifacts from the TSE 1.5T 3T was reduced in the most artifacts from SE. Signal-to-noise ratio was the lowest SNR is low, appears in the implant, the 1.5T was the Implant + Bi Cu and Zn showed similar results to each other. Therefore, the results of artifacts variation of diamagnetic material, magnetic susceptibility (${\chi}$) is the most this shows the reduced aspect lower than the implant artificial metal artifacts criteria in the video using low bismuth susceptibility to low material the more metal artifacts It was found that the decrease. Therefore, based on the study on the increase, the metal artifacts reduction for the whole, as well as dental prosthesis future orthodontic materials in a way that can even reduce the artifact does not appear which has been pointed out as a disadvantage of the solutions of conventional metal artifact It is considered to be material.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2018

PURPOSE. The aim of this study was to evaluate the effects of abutment diameter, cement type, and re-cementation on the retention of implant-supported CAD/CAM metal copings over short abutments. MATERIALS AND METHODS. Sixty abutments with two different diameters, the height of which was reduced to 3 mm, were vertically mounted in acrylic resin blocks with matching implant analogues. The specimens were divided into 2 diameter groups: 4.5 mm and 5.5 mm (n=30). For each abutment a CAD/CAM metal coping was manufactured, with an occlusal loop. Each group was sub-divided into 3 sub-groups (n=10). In each subgroup, a different cement type was used: resin-modified glass-ionomer, resin cement and zinc-oxide-eugenol. After incubation and thermocycling, the removal force was measured using a universal testing machine at a cross-head speed of 0.5 mm/min. In zinc-oxide-eugenol group, after removal of the coping, the cement remnants were completely cleaned and the copings were re-cemented with resin cement and re-tested. Two-way ANOVA, post hoc Tukey tests, and paired t-test were used to analyze data (${\alpha}=.05$). RESULTS. The highest pulling force was registered in the resin cement group (414.8 N), followed by the re-cementation group (380.5 N). Increasing the diameter improved the retention significantly (P=.006). The difference in retention between the cemented and recemented copings was not statistically significant (P=.40). CONCLUSION. Resin cement provided retention almost twice as strong as that of the RMGI. Increasing the abutment diameter improved retention significantly. Re-cementation with resin cement did not exhibit any difference from the initial cementation with resin cement.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.158-162
• /
• 2008

Heart rate has many effect by environment factor and body factor and mind factor. Experimental testing decide to make relaxed condition. so It want to get correct data peoples different time and condition in the day so medical mans think relaxed to low Heart rate. but normal heart different from peoples and time. there was noting standard. so Heart rate is really hard to relaxed heart rate. Heart rate pattern must have long time analysis for good result. if you get relaxed heart rate so you don't need long-time analysis. Relaxed heart pattern used for guidance of auditory impulse public got concentration and solve to stress. it chose MC Square and mozart music. Two kind of auditory impulse analysis to make a relaxed Heart rate and relaxed pattern. way of analysis is HRV and minute of heart bit rate. result It have find Guidance to Relaxed Heart rate.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.225-233
• /
• 2002

This study was aimed to evaluate the effects of ultrasonic vibration on margin types and cements by comparing bond strength of cemented crown. In this study, margins of each metal die, which were chamfer, shoulder and shoulder with bevel, were prepared using computer milling machine. Specimens were cemented with zinc phosphate cement or resin cement. The specimens were divided by the finish line and cement used, ultrasonic vibration. I made total 84 specimens. All specimens were divided into two groups. One group was not vibrated, the other group was subjected to ultrasonic vibration for 12 minutes. Tensile bond strength was measured using Universial testing machine. The changes of bond strength in groups were statistically analyzed by t-test or One-way ANOVA. The results were as follows : 1. Ultrasonic instrumentation diminished the bond strength of crown cemented with zinc phosphate cement and resin cement after 12 minutes application. 2. In case of zinc phosphate cement, the bond strength of a vibrated group was showed significantly decreased(p<0.05). In vibrated groups with zinc phosphate cement, shoulder with bevel exhibit a significant difference to chamfer and shoulder(p<0.05) 3. Resin cement was more resistant to ultrasonic vibration than zinc phosphate cement and showed no significant differences according to ultrasonic vibration and margin type. In conclusion, These results revealed that zinc phosphate cement was most affected and resin cement was the least affected by ultrasonic vibration. Especially shoulder with bevel design was most affected in zinc phosphate cement groups. we should consider these results and be taken in the application of ultrasonic vibration to any teeth restored with crowns.

• Toxicological Research
• /
• v.16 no.4
• /
• pp.317-323
• /
• 2000

The immunosuppressive effects of thirty nine chemicals chosen by their potential toxicity were evaluated using a three-step testing method. The immunotoxicity test method developed in this study consisted of three simple assays of lymphoproliferation, mixed leukocyte response, and interleukin (IL)-2 production. The first step was mitogen-induced proliferation assay. Ten chemicals showed the inhibitory effects on the mitogen (lipopolysaccharide or concanavalin A)-induced proliferation in dose-dependent manners. The second step was mixed lymphocyte response. This step crosschecked the growth-suppressive effects detected at the first step. All of 10 chemicals, which showed suppression of lymphoproliferation, also exhibited the suppressive effects on the mixed lymphocyte response in the similar range of chemical concentration. The third step was planned to determine whether or not this growth suppression was mediated through an early activation of T-cell, which could be represented with IL-2 production. Six out of 10 chemicals decreased the interleukin-2 production in the similar concentration range used in the step 1 and 2. These results suggest that those 6 chemicals might have their targets on the signal transduction path-way toward the IL-2 production. In the meantime the other 4 chemicals might have their targets after the IL-2 production signal. Taken all together, the three-step test would be simple, fast, and efficient to deter-mine whether or not the chemical has immunosuppressive effects.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.5
• /
• pp.388-395
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the resistance to deformation under static overloading by measuring yield and fracture strength, and to analyze the failure characteristics of implant assemblies made of different titanium grades and connections. MATERIALS AND METHODS. Six groups of implant assemblies were fabricated according to ISO 14801 (n=10). These consisted of the combinations of 3 platform connections (external, internal, and morse tapered) and 2 materials (titanium grade 2 and titanium grade 4). Yield strength and fracture strength were evaluated with a computer-controlled Universal Testing Machine, and failed implant assemblies were classified and analyzed by optical microscopy. The data were analyzed using the One-way analysis of variance (ANOVA) and Student's t-test with the level of significance at P=.05. RESULTS. The group $IT4_S$ had the significantly highest values and group IT2 the lowest, for both yield strength and fracture strength. Groups $IT4_N$ and ET4 had similar yield and fracture strengths despite having different connection designs. Group MT2 and group IT2 had significant differences in yield and fracture strength although they were made by the same material as titanium grade 2. The implant system of the similar fixture-abutment interfaces and the same materials showed the similar characteristics of deformation. CONCLUSION. A longer internal connection and titanium grade 4 of the implant system is advantageous for static overloading condition. However, it is not only the connection design that affects the stability. The strength of the titanium grade as material is also important since it affects the implant stability. When using the implant system made of titanium grade 2, a larger diameter fixture should be selected in order to provide enough strength to withstand overloading.

• Physical Therapy Korea
• /
• v.22 no.1
• /
• pp.9-18
• /
• 2015

This study aimed to compare the characteristics of breast cancer surgery and shoulder surgery patients on the shoulder range of motion (ROM), degree of pain and dysfunction, and scapular position. This study was carried out with a total of 90 women: a breast cancer surgery group (BS, $n_1=30$), a shoulder surgery group (SS, $n_2=30$) and a control group ($n_3=30$). Shoulder ROM, the Quadruple Visual Analogue Scale (QVAS), the Shoulder Pain and Disability Index (SPADI), and the Scapular Index (SI) were used to assess shoulder function. Statistical analyses were performed using a one-way analysis of variance, crosstab test, and independent sample t-test. Post-hoc testing was carried out with Bonferroni test. There were significant differences in shoulder ROM when the BS and the SS were compared with the control group. However, there was no significant difference in ROM between the BS and SS. Furthermore, there was a significant difference in shoulder pain between both surgery groups, and there was greater shoulder dysfunction in the SS than in the BS. There was also a significant difference in upper extremity posture when the BS and the SS were compared to the control group. Finally, there was no significant difference in upper extremity posture between the BS and the SS. This study compared shoulder ROM, pain, dysfunction, and upper extremity postures between the BS and SS. While there were no significant differences in shoulder ROM, pain, and upper extremity posture between both surgery groups, the level of dysfunction was found to be significantly different. Therefore, health professionals managing for breast cancer surgery or shoulder surgery patients should consider these outcomes.

• Physical Therapy Korea
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2015

The purpose of this study was to compare the change in electromyography (EMG) activity in the gluteus maximus (G-max) and the gluteus medius (G-med) in subjects with and without chronic ankle instability (CAI) during three functional postures. Twenty four females were recruited for this study. Subjects were assigned into two groups: with CAI ($n_1=12$) and without CAI ($n_2=12$). The assessment postures were rotational squat, one leg stand above a gradient and crossed leg-sway. Electromyographic activities of the G-max and the G-med were recorded using surface EMG and was normalized using the maximal voluntary isometric contraction elicited using a manual muscle testing. Independent t-test was used to determine the statistical differences between two groups during the three functional postures. The comparisons of the three posture between two groups were performed using a one-way repeated analysis of variance. A Bonferroni adjustment used for post hoc analysis. The activation of EMG on G-max performing the one leg stand above a gradient and crossed leg-sway in subjects with CAI is significantly higher than normal group (p<.05). The activation of EMG on the G-max during the rotational squat was significantly increased, compared to those of the one leg stand above a gradient and crossed leg-sway (p<.05). The activation of EMG on G-med performing three exercise at CAI is significantly higher than normal group (p<.05). The activation of EMG on the G-med during the crossed leg-sway was significantly increased, compared to the rotational squat (p<.05). This study provides valuable information for clinician who research CAI.