• Journal of Korean Academy of Dental Administration
• /
• v.5 no.1
• /
• pp.31-37
• /
• 2017

Recently interest in infection control is increasing in hospitalsnfection control has become more important in the overall health care practiceental hospital also requires thorough infection control. There are various kinds of vectormedical clothing. Contaminated clothing of a hospital staff can be a vector of nosocomial infecton. actual case of nosocomial infecton caused by contaminated medical clothing, nursing students were measuring contamination levels of uniforms and pathogenic microorganism wdetected in front of the uniform and pocket. There is also a high risk of exposure to contamination in the dental hospital. We conducted a study to enhance awareness about infection and proper clothing management by comparing before and after contamination of clothing caused by aerosols produced during scaling. Subjects were scaling operators' uniforms in the department of dental hygiene, K University located in Daejeon. Before scaling, the uniform was sterilized by autoclavecaling was performed times in the same place (an average of 60 minutes per person, a total of 180 minutes). ive parts of the uniform (sleeves, chest, belly, thigh, edge of pants) contracted Rodak-plate for 15 seconds. After incubating the contacted Rodak-plate at 37℃ incubator, contamination levels by measuring the number of colonies. As a result, all parts increased number of colonies. ontamination order chestedge of pants thigh belly sleeves. Increase rate of colonies was also high in the order chest edge of pants thigh belly sleeves. This study showed seriousness of clothing contaminationcaused by aerol produced during scalingcontamination of clothing can be a path to nosocomial infecton. According to th study, infection control for clothing as well as dental instruments should be implemented and thorough infection control training needed for dental staff. In further researches, practical infection prevention supplementing clothing management method.

• Journal of agricultural medicine and community health
• /
• v.25 no.2
• /
• pp.231-244
• /
• 2000

Classification and research trends were studied to analyze a total of 240 original articles that have been published in 34 volumes of The Korean Journal of Rural Medicine from 1976 to 1999. The results were as follows: 1. A total of 337 articles were published. Among them, 240(71.2%) articles were classified as original articles. This number has been increasing significantly over the years as the number of the articles was 13 in the 1970s, 73 in the 1980s, and 154 in the 1990s. 2. There were 10 authors in the original articles and 55(22.9%) of them were written by 3 of them. There were five research institutions involved in the articles, and 106(44.2%) of the articles were done by one research group. 3. In the original articles. 24(10.0%) were noted to be done using research funds, and only 6(2.5%) were written in English. 4. In the view of the research styles of the original articles, 115(47.9%) used analytical study, 92(38.3%) used technical study, 21(9.2%) used experimental study, and 6(2.5%) used case reports. In the 1970s, 13(100.0%) articles used technical study, and in the 1980s, 47(64.4%) used technical studies and 19(26.0%) used analytical studies. However, in the 1990s, 96(62.8%) articles used analytical studies and 32(20.9%) used technical studies. The statistical methods most commonly used in the articles were technical statistics, the ${\chi}^2$-test, and the t-test respectively. 5. On the classification into three different research fields, 105(43.8%) articles were classified as health management, 96(40.0%) as disease epidemiology, and 39(16.3%) as rural environment and rural occupational disorders. In the 1970s, 12 (92.3 %) of the articles were on disease epidemiology and 1(7.7%) on health management were published. In the 1980s, 33(45.2%) articles on disease epidemiology, 29(39.7%) on health control, and 11(15.1%) on rural environment and rural occupational disorders were recorded. In the 1990s, however, 75(48.7%) articles were on health control, 51(33.1%) on disease control, and 28(18.2%) on the rural environment and rural occupational disorders. 6. According to the research subjects in each research field, the 39 articles in rural environment and rural occupational disorders were composed of 8(20.5%) articles on pesticide intoxication, 7(17,9%) on farmer's diseases, 7(17.9%) on vinyl-house diseases, and 6(15.4%) on accidents. From a total of 96 articles in disease epidemiology 56(58.3%) articles were on parasites, 16(16.7%) on non-infectious diseases, 12(12.5) on infectious diseases. From 105 articles in health control 25(23.8%) articles were on medical care utilization patterns, 18(17.1%) on the health care delivery system, and 13(12.4%) on maternal and child health. In the analysis of the 10 most prevalent subjects dealt in the above articles, 6(46.2%) articles were on parasites and 4(30.8%) on non-infectious diseases were recorded in the 1970s. In the 1980s, 28(38.4%) were on parasites. 9(12.3%) on the health care system, 7(9.6%) on medical care utilization patterns, 5(6.8%) on maternal and child health, and 4(5.5%) were on pesticide intoxication. In the 1990s, 22(14.3%) articles were on parasites. 18(11.7%) on medical care utilization patterns, 16(10.4%) on senile health, 14(9.1%) on the health care system, 10(6.5%) on infectious diseases, arid 10(6.5%) were on non-infectious diseases. In conclusion, the research activity on rural health has been strengthened in this country because the original articles in The Korean Journal of Rural Medicine have significantly increased in the past 24 years. In the 1970s and 1980s, research on disease epidemiology was most prevalent, but in the 1990s papers on health care were most popular. In addition, the articles on parasites were most frequently published in the 1970s, 1980s, and 1990s, showing that parasitic problem was the main theme in those eras. However, in the 1990s, it was evident that the articles on parasites were decreasing and articles on the subject of medical care utilization patterns and senile health increased. Hereafter it was expected that research on health care would be more common in rural health in Korea.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.1
• /
• pp.35-40
• /
• 2010

Purpose: To compare the outcome of patients who underwent rotator cuff repair using all-arthroscopic mini-open repair techniques. Materials and Methods: We retrospectively reviewed 44 patients who underwent either arthroscopic (group I) or mini-open (group II) rotator cuff repair. 23 patients underwent an arthroscopic repair and 21 patients had a mini-open repair. The mean age was 50.4 years in the arthroscopic group and 56.7 years in the mini-open group. The outcomes for the 2 groups were evaluated using ROM, VAS, ASES, UCLA scale. Statistical analysis was performed using correlations, T-test, Paired T-test. The mean follow-up period in the arthroscopic and mini-open groups were 24.1months and 26.1months, respectively. Results: The group I (arthroscopic group) had 2 small-sized tears, 10 medium sized tears, and 11 large sized tears (3~5 cm). The group II (mini-open group) had 1 small sized tears, 8 medium sized tears, and 12 large sized tears. The mean cuff tear size of the group I and Group II were 3.8 cm and 4.2 cm, respectively. At last follow-up periods, ROM and functional scores were improved. In the group I and group II, there were no significant difference in ROM, VAS, ASES, UCLA score. Conclusion: The size of the tear did not produce different results at arthroscopic repair group but larger tear size was associated with a worse outcome in mini-open group. There were no significant clinical results between the arthroscopic and mini-open group.

• Journal of Science Education
• /
• v.41 no.3
• /
• pp.334-350
• /
• 2017

The purposes of this study are to develop scientific-inquiry based on STEAM education program and to investigate the effects of the program on middle-school students' interests, self-efficacy, and career choice about science, technology/engineering, and mathematics. In order to develop this program, the literature investigation and previous studies were conducted, so that finally the developmental direction was based on scientific inquiry and the developmental theme and model were selected. A total 92 first-graders in G middle-school of Daegu city were participated in this study. A single group pre-post test paired t-test was conducted to figure out changes of students' interest, self-efficacy, and career choices before or after applying this program. In addition, in-depth interviews were conducted with 14 students to find their specific responses. The results of this study were as follows. First, STEAM education program on the theme of 'RC Airplane' was developed on the basis of the 'ADBA' model. Second, the developed STEAM educational program not only results a decisive difference statistically but also has significant effects on middle-school students' interests, self-efficacy, and career choice in science, technology/engineering, and mathematics, who are involved in the free-semester program, across the overall affective domain. In conclusion, the STEAM educational program in this study could affect significant meanings to middle-school students during the free-semester. It could contribute to facilitate middle-school students' education for happiness and to grow the creative STEAM talents.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.2
• /
• pp.186-191
• /
• 1994

Tc-99m MIBI, a lipophilic cation, was reported as a useful agent for localization of lung cancer. The effect of radiation therapy on the uptake of Tc-99m MIBI in lung cancer, however, was not well evaluated. The aim of the present study was to elucidate the usefulness of Tc-99m MIBI SPECT in the localization and the assessment of radiotherapy in non-small cell lung cancer. Twenty patients(19 males and 1 female, mean age 59, 16 squamous cell ca and 4 adenoca) were studied with Tc-99m MIBI SPECT before radiation therapy. Eleven patients(10 males and 1 female, mean age 59, 8 squamous cell ca and 3 adenoca) were repeated the study 1 month after the completion of radiation therapy(mean dose 6453cGy). All patients showed positive uptakes of Tc-99m MIBI in their tumors. One patient showed a hot uptake in atelectatic area. There was no difference of Tc-99m MIBI uptakes between squamous cell ca and adenoca either on planar or tomographic images. Tc-99m MIBI uptake ratios of squamous cell ca and adenoca were $1.50{\pm}0.16$ and $1.45{\pm}0.15$ on planar images, and $2.73{\pm}0.46$ and $2.54{\pm}0.37$ on tomographic images, respectively. The concordance between radiological change(chest x-ray and CT) and change of Tc-99m MIBI uptakes was 9/11 (81.8% ). In conclusion, Tc-99m MIBI SPECT was useful in the localization of tumor and the assessment of radiation therapy in non-small cell lung cancer.

• Journal of Gastric Cancer
• /
• v.6 no.1
• /
• pp.11-17
• /
• 2006

Purpose: The five-year survival rate is over 95% for radically resected early gastric cancer. The development of diagnostic techniques enables early detection of gastric cancer, so the life expectancy of patients with early gastric cancer is prolonged. Therefore, a limited number of surgeries are performed these days for the purpose of increasing the quality of life. The purpose of this study is to assess the postoperative quality of life after a pylorus-preserving gastrectomy (PPG) compared with that after a subtotal gastrectomy with gastroduodenal anastomosis (B-I). Materials and Methods: One hundred seven (107) patients who underwent gastric surgery for early gastric cancer from January 1999 to December 2003 at the Department of Surgery of Chonnam National University Hospital were selected. We compared patients who underwent a PPG with those who underwent a B-I. The clinical results were compared by using the chi-square test and the Student's T-test. The data were considered to be significant when the P value was less than 0.05. Results: Twenty-nine patients (29) underwent a PPG, and the other seventy-eight (78) patients underwent a B-I. There was no significant difference between the two groups on sex, age, and postoperative abdominal symptoms. The patients who underwent a PPG showed shorter operation times and less reflux gastritis and esophagitis on endoscopic evaluation than the patients who underwent a B-I. Conclusion: The pylorus-preserving gastrectomy (PPG) is a more physiologic operation than the subtotal gastrectomy with gastroduodenal anastomosis (B-I) and improves the postoperative quality of life.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.145-153
• /
• 2009

The purpose of this study was to evaluate the effect of instrument compliance on the polymerization shrinkage stress measurements of dental composites. The contraction strain and stress of composites during light curing were measured by a custom made stress-strain analyzer, which consisted of a displacement sensor, a cantilever load cell and a negative feedback mechanism. The instrument can measure the polymerization stress by two modes: with compliance mode in which the instrument compliance is allowed, or without compliance mode in which the instrument compliance is not allowed. A flowable (Filtek Flow: FF) and two universal hybrid (Z100: Z1 and Z250: Z2) composites were studied. A silane treated metal rod with a diameter of 3.0 mm was fixed at free end of the load cell, and other metal rod was fixed on the base plate. Composite of 1.0 mm thickness was placed between the two rods and light cured. The axial shrinkage strain and stress of the composite were recorded for 10 minutes during polymerization. and the tensile modulus of the materials was also determined with the instrument. The statistical analysis was conducted by ANOVA. paired t-test and Tukey's test (${\alpha}<0.05$). There were significant differences between the two measurement modes and among materials. With compliance mode, the contraction stress of FF was the highest: 3.11 (0.13). followed by Z1: 2.91 (0.10) and Z2: 1.94 (0.09) MPa. When the instrument compliance is not allowed, the contraction stress of Z1 was the highest: 17.08 (0.89), followed by FF: 10.11 (0.29) and Z2: 9.46 (1.63) MPa. The tensile modulus for Z1, Z2 and FF was 2.31 (0.18), 2.05 (0.20), 1.41 (0.11) GPa, respectively. With compliance mode. the measured stress correlated with the axial shrinkage strain of composite: while without compliance the elastic modulus of materials played a significant role in the stress measurement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.72-80
• /
• 2019

Purpose: The purpose of this study is to compare and analyze the shear bond strength and fracture pattern in different enamel tooth surface treatments for resin splinting materials. Materials and Methods: G-FIX and LightFix were used as tooth splinting materials. Twenty bovine mandibular incisors were used for the preparation of the specimens. The exposed enamel surface was separated into four parts. Each tooth was treated with 37% phosphoric acid, 37% phosphoric acid + adhesive resin, 37% phosphoric acid + G-premio bond, and G-premio bond for each fraction. Shear bond strength was measured using a universal testing machine. After measuring the shear bond strength, the fractured surface of the specimen was magnified with a microscope to observe the fracture pattern. Two-way ANOVA was used to verify the interaction between the material and the surface treatment method. One-way ANOVA was used for comparison between the surface treatment methods of each material and post-hoc test was conducted with Scheffe's test. An independent t-test was conducted to compare shear bond strengths between materials in each surface treatment method. All statistics were conducted at 95% significance level. Results: G-FIX, a tooth splinting resin, showed similar shear bonding strength when additional adhesive resins were used when material was applied after only acid etching, and LightFix showed the highest shear bonding strength when additional adhesive resins were used after the acid etching. In addition, both G-FIX and LightFix showed the lowest shear bond strength when only self-etching adhesive was applied without additional acid etching. Verification of interactions observed interconnection between resins and surface treatment methods. Most of the mixed failure was observed in all counties. Conclusion: When using G-FIX and LightFix, which are tooth-splinting materials, it is considered that sufficient adhesion will be achieved even after applying only acid etching as instructed by the manufacturer.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.92-96
• /
• 2018

Purpose In case of nuclear medical hepatobiliary scan, To quantitatively evaluate contractility of a gallbladder, gallbladder ejection fraction (GBEF%) is calculated from anterior images using fatty meal. However, when a gallbladder and other organs overlap on an anterior image, the gallbladder ejection fraction is not accurately evaluated. In order to reduce this error, the objective of our study was to figure out whether there is a significant difference in GBEF% calculated from the anterior and right lateral images. Materials and Methods After intravenous injection of 99mTc-Mebrofenin 370 MBq to randomly 50 patients who visited our hospital, we started to examine nuclear hepatobiliary scan. Using skylight(Philips, United States), we acquired anterior and right lateral image at 10 minutes, 20 minutes, 30 minutes, 60 minutes, 90minutes after injection. Using images at 60 and 90 minutes, gallbladder ejection fraction (GBEF%) was calculated from the anterior and right lateral images using JETstream workspace. For drawing more accurate ROI, CT images were referenced and 4 radiologists calculated the GBEF% in the same image and calculated the average value. We assessed whether there was a significant difference in GBEF% calculated from the anterior and right lateral images using SPSS program(Statistical Package for the Social Science, SPSS Ver.18 Inc. USA). Results About randomly 50 patients, the average value of the GBEF% calculated from the anterior image was 63.212 and the average value of the GBEF% calculated from the right lateral image was 62.666. GBEF% decreased 0.433% on the right lateral image compared with anterior image. Result of paired sample t-test, p value is over 0.05. So, there was no significant difference in GBEF% calculated from the anterior and right lateral images. Conclusion In the case that a gallbladder and other organs are not separated on an anteior image, Right lateral image would be better to acquire more accurate GBEF% than using anterior image.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.38-48
• /
• 2011

Purpose: Dentists suffer back, neck and shoulder pain during their careers due to bad operating posture. If dentists have a good operating posture ergonomically, there would be less pain and discomfort in the shoulder and back. Therefore, dentists should learn the Home position which enables dentists to approach a stable posture ergonomically. This study was to compare tooth preparation in the Home position and the Random position, and evaluate the clinical efficacy of the Home position. Materials and methods: Tooth preparation for fixed partial denture was performed on the maxillary left 2nd premolar and maxillary left 2nd molar at the two different operating positions were compared. The amount of occlusal reduction, marginal width, subgingival margin depth, and convergence angle were measured. A T-test was performed separately to compare the results of the Random position and the Home position. Results: 1. The amounts of average thickness of occlusal reduction on fossa were deficient to the ordered ones in the Random position and the Home position (P > .05). 2. The average subgingival margin depth of prepared margin on maxillary left 2nd premolar, maxillary left 2nd molar were excessive in the Random position than in the Home position. On the maxillary left 2nd premolar, there was no statistical difference in the Random position and the Home position except Distal midline, DL line angle, Lingual midline, ML line angle (P< .05). On the maxillary left 2nd molar, there was no statistical difference in the Random position and the Home position (P < .05). 3. Average convergence angle in the Random position and the Home position were excessive compared to the ordered angle. There was no statistical difference in the Random position and the Home position (P > .05). 4. Analysis of pearson correlation : In the Random position, the amounts of average thickness of occlusal reduction, the average subgingival margin depth of prepared margin, convergence angle were significantly associated with each other (P < .05). But in the Home position, they were not significantly associated with each other (P < .05). 5. The time needed for preparation in the Home position was faster or equal than that of the Random position as time went on. Conclusion: In conclusion, there were no significant differences between Home position and Random position in measures of occlusal reduction, marginal width, marginal depth, convergence angle. However, preparation time and incidence of damaging adjacent teeth were less in Home position than in Random position. Therefore, if trained properly, Home position which is more ergonomically stable can be adopted for clinical use.