• Computational Structural Engineering : An International Journal
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2003

For system identification of large structures, it is not practical to identify the entire structure due to the prohibitive computational time and difficulty in numerical convergence. This paper explores the possibility of performing system identification at substructure level, taking advantage of reduction in both the number of unknowns and the number of degrees of freedom involved. Another advantage is that different portions (substructures) of a structural system can be identified independently and even concurrently with parallel computing. Two substructural identification methods are formulated on the basis whether substructural approach is used to obtain first-order or second-order model. For substructural first-order model, identification at the substructure level will be performed by means of the Observer/Kalman filter Identification (OKID) and the Eigensystem Realization Algorithm (ERA) whereas identification at the global level will be performed to obtain second-order model in order to evaluate the system's stiffness and mass parameters. In the case of substructural second-order model, identification will be performed at the substructure level throughout the identification process. The efficiency of the proposed technique is shown by numerical examples for multi-storey shear buildings subjected to random forces, taking into consideration the effects of noisy measurement data. The results indicate that both the proposed methods are effective and efficient for damage identification of large structures.

• Smart Structures and Systems
• /
• v.8 no.4
• /
• pp.343-365
• /
• 2011

Structural system identification (SSI) is an inverse problem of difficult solution. Currently, difficulties lie in the development of algorithms which can cater to large size problems. In this paper, a parameter estimation technique based on evolutionary strategy is presented to overcome some of the difficulties encountered in using the traditional system identification methods in terms of convergence. In this paper, a non-traditional form of system identification technique employing evolutionary algorithms is proposed. In order to improve the convergence characteristics, it is proposed to employ immune algorithms which are proved to be built with superior diversification mechanism than the conventional evolutionary algorithms and are being used for several practical complex optimisation problems. In order to reduce the number of design variables, domain decomposition methods are used, where the identification process of the entire structure is carried out in multiple stages rather than in single step. The domain decomposition based methods also help in limiting the number of sensors to be employed during dynamic testing of the structure to be identified, as the process of system identification is carried out in multiple stages. A fifteen storey framed structure, truss bridge and 40 m tall microwave tower are considered as a numerical examples to demonstrate the effectiveness of the domain decomposition based structural system identification technique using immune algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2538-2541
• /
• 2005

This paper deals one of the methods of system identification, especially on-line system identification in time-domain. The algorithm in this study needs all states of the system as well input to it for system identification. In this reason, Kalman filter is used for state estimation. But in order to implement a state estimator, the fact that a system model must be known is logical contradiction. To overcome this, state estimation and system parameter estimation are performed simultaneously in one sample. And the result of the system parameter estimation is used as basis to state estimation in next sample. On-line system identification comes, in every sample by performing both processes of state estimation and parameter estimation that are related mutually and recursively. This paper demonstrates the validity of proposed algorithm through an example of an unstable inverted pendulum system. This algorithm can be useful for on-line system identification of a system that has fewer number of measurable output than system order or number of states.

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.345-351
• /
• 2021

This study is designed to determine how to identify misleading news articles based on natural language processing on Artificial Intelligence & Bigdata. A misleading news discrimination system and method on natural language processing is initiated according to an embodiment of this study. The natural language processing-based misleading news identification system, which monitors the misleading vocabulary database, Internet news articles, collects misleading news articles, extracts them from the titles of the collected misleading news articles, and stores them in the misleading vocabulary database. Therefore, the use of the misleading news article identification system and methods in this study does not take much time to judge because only relatively short news titles are morphed analyzed, and the use of a misleading vocabulary database provides an effect on identifying misleading articles that attract readers with exaggerated or suggestive phrases. For the aim of our study, we propose news article identification methods in natural language processing on Artificial Intelligence & Bigdata.

• International Journal of Quality Innovation
• /
• v.3 no.2
• /
• pp.174-182
• /
• 2002

System identification and controller formulation are essential in dynamic process control. In system identification, data for system identification are obtained, and then they are analyzed so that the system model of the process is built, identified, and diagnosed. In controller formulation, the control equation is derived based on the result of the system identification. There has been much theoretical research on system identification and controller formulation. These theories are very useful when they are appropriately applied. To our regret, however, these theories are not always effectively applied in practice because the engineers and the operators who manage the process often do not have the necessary understanding of required time series analysis methods. On the other hand, because of widespread use of statistical packages, system identification such as estimating ARMA models can be done with little understanding of time series analysis methods. Therefore, it might be said that the most theoretically difficult part in practice is the controller formulation. In this paper, lists of control equations are proposed as a useful tool for practitioners to use. The tool supports bridging the gap between theory and practice in dynamic process control. Also, for some models, the generalized control equations are obtained.

• Structural Engineering and Mechanics
• /
• v.78 no.3
• /
• pp.369-378
• /
• 2021

This paper reviewed a few output-only system identification algorithms and identified the shortcomings of those popular blind source separation methods. To address the issues such as less sensors than the targeted modal modes (under-determinate problem), repeated natural frequencies as well as systems with complex mode shapes, this paper proposed a complex wavelet modified second order blind identification method (CWMSOBI) by transforming the time domain problem into time-frequency domain. The wavelet coefficients with different dominant frequencies can be used to address the under-determinate problem, while complex mode shapes are addressed by introducing the complex wavelet transformation. Numerical simulations with both high and low signal-to-noise ratios validate that CWMSOBI can overcome the above-mentioned issues while obtaining more accurate identified results than other blind identification methods.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.10a
• /
• pp.433-439
• /
• 1998

In this paper, we present an approach to the structure identification based on the input space partition methods and to the parameter identification by hybrid learning method in neuro-fuzzy system. The structure identification can automatically estimate the number of membership function and fuzzy rule using grid partition, tree partition, scatter partition from numerical input-output data. And then the parameter identification is carried out by the hybrid learning scheme using back-propagation and least squares estimate. Finally, we sill show its usefulness for neuro-fuzzy modeling to truck backer-upper control.

• Structural Engineering and Mechanics
• /
• v.56 no.2
• /
• pp.293-315
• /
• 2015

While most of researches on system identification of building structures are aimed at finding modal parameters first and identifying the corresponding physical parameters by using the transformation in terms of transfer functions and cross spectra, etc., direct physical parameter system identification methods have been proposed recently. Due to the problem of signal/noise (SN) ratios, the previous methods are restricted mostly to earthquake records or forced vibration data. In this paper, a theoretical investigation is performed on the influence of wind disturbances on stiffness identification of building structures using micro-tremor at limited floors. It is concluded that the influence of wind disturbances on stiffness identification of building structures using micro-tremor at limited floors is restricted in case of using time-series data for low-rise buildings and does not cause serious problems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.44-53
• /
• 2009

In this paper, Recursive Least Squares (RLS) and Fourier Transform Regression (FTR) methods for estimating stability and control derivatives of small unmanned helicopter are evaluated together with MMLE technique. Flight data simulated by using a commercial small-scale helicopter model are exploited to estimate the parameters with accuracies for hover and cruise modes. The performances of the system identification methods are also compared by analyzing the responses of the reconstructed systems using estimated derivatives.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.844-850
• /
• 2016

This study pertains to the extraction of the road noise component of signals from a vehicle's interior noise via the traditional frequency domain and time domain system identification methods. For road noise extraction based on the frequency domain system identification method, the appropriate matrix inversion strategy is investigated and causal and non-causal impulse response filters are compared. Furthermore, appropriate data lengths for the frequency domain system identification method are investigated. In addition to the traditional road noise extraction methods based on frequency domain system identification, a new approach to extract road noise via the time domain system identification method based on a parametric input-output model is proposed and investigated in the present study. In this approach, instead of constructing a higher order model for the full-band road noise, input and output signals are processed in the subband domain and lower order parametric models optimal to each subband are determined. These parametric models are used to extract road noises in each subband; the full band road noise is then reconstructed from the subband road noises. This study shows that both the methods in the frequency domain and the time domain successfully extract the road noise from the vehicle's interior noise.