• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.330-333
• /
• 1997

In this paper, we designed a low power and small-sized, light weighted intelligent ambulatory monitoring system using a flash memory card. The system's hardware specifications are as follows: 2 channels, 8bit/250Hz sampling rate, 20M byte storage capacity, a single-chip microcontroller (68HC11E9). To easily interface with PC based system, FFS(Flash File System) was used. We obtained the QRS detection rate of 99.14 through the evaluation with MIT/BIH database.

• Journal of Korean Society of Transportation
• /
• v.3 no.1
• /
• pp.58-75
• /
• 1985

On facing the information society, the multi-faceted information utilization and the establishment of synthetic information management system in the overall industry and business administration have raised considerable attention. Thus, this study aims at the improvement of freight transport management through the establishment of pooling of the road freight transport information system as its effective information supporting system. Especially, it describes the freight transport information network, structure, function, and subject of the freight transport information center, as a basic planning design for the freight transport information system. Furthermore, it deals with the identification of the systems design requirements, working process, and S/W & H/W design specifications. Finally, we expect that this study will be contributed for the improvement of the road freight transport business to meet both the increase of freight transport demands due to the continuing economic growth and the social needs for the establishment of transport-order.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.58-64
• /
• 2003

Noise generation systems are used to generate noise signals with specified characteristics. In recent study, DCT-based noise generation system outperforms the conventional noise generation system when a noise model requires complicated PSD(Power Spectral Density) specifications. In this paper, we propose the area-efficient noise generation system based on DCT method. It is shown that the proposed system results in area reduction by 61~64% except DCT block. Furthermore, it achieves power reduction by 41~56%.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.47-52
• /
• 2003

23 cap beams on the 1 Km length jetty bridge in Shin-da power plant (Taipower co., Taiwan) utilize far-end telecontrol cathodic protection technology which is the first case ever used in Taiwan. The system comprises cathodic protection system and te1econtrol monitoring system. The control and monitoring such as protection current adjustment, protection potential and depolarization measurement of the 23 cap beams can be adjusted through system telecontrol operations. Thereby allows monitoring and control of the 23 anode zones in a convenient and cost effective way. This system is at present still in its best running condition since Sept. 1997 when it was completed. All the 23 cap beams can achieve the 100 mV depolarization potential criteria of protection. It meet the specifications of reinforced concrete cathodic protection standard and proved to be very excellent.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.576-579
• /
• 2002

This paper compares the performances of estimate by computer simulation considering parameters of system specifications, Installation and surrounding conditions with those of real PV system and show verification of designed value. We evaluate the performances of PV system with changing of parameter, specially a field type and suggest optimum condition in each field type. In the future, We will Intend to develop an analysis tool and construct database for optimum design of PV system.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.612-619
• /
• 2011

This paper presents a water treatment system for leachate from sewage-filled ground that uses a pulsed-power modulator developed based on semiconductor switches in order to realize a long life, a high repetition rate, and a fast rising time. The specifications of the developed pulsed-power modulator are the pulsed output voltage, the output current, the pulse repetition rate (PRR), the pulse width, and an average output power of $60\;kV_{max}$, $300\;A_{max}$, 3000, $50\;{\mu}s$, and 15 kW, respectively. The pulsed-power water treatment system was introduced and analyzed using an equivalent electrical circuit model to optimize the output voltage waveform. The experimental results verify that the proposed water treatment system can be effectively used for industrial applications.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.281-285
• /
• 2002

This paper compares not only the performances of estimate by computer simulation considering parameters of system specifications, installation and surrounding conditions with those of real PV system and but also shows verification of designed value. We evaluate the performances of PV system with changing of parameter, specialty a field type and suggest optimum condition in each field type. in the future, we will intend to develop an analysis tool and construct database for optimum design of PV system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.93-96
• /
• 2002

The manufacturing paradigm has shifted dramatically over the past decade from “push” or mass production mode to “pull” or customer-driven, order-based manufacturing mode, as multitudes of customers now demand mass customization of configurable products. As a means to achieve such rapidly responsive manufacturing system, Advanced Planning System (APS) has become an essential software tool for achieving modern “build-to-order” and “configure-to-order” manufacturing environment. APS enables manufacturers to respond to variety of customer demands In real time by instantly configuring manufacturing processes based on specifications described in each purchase orders and providing capable-to-promise information directly to customer by performing rapid “what-if” manufacturing simulated scenarios. This paper discusses the working of such system as well as the business processes that incorporate such systems to enable efficient “build-to-order” environment.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1860-1865
• /
• 2008

The propulsion for locomotive application has changed from the DC motor system to the induction motor system. Although the induction motor system has almost reached the stage of maturity, this system also needs to be changed to the PM motor system for the direct drive without using reduction gear. Thus, the IPMSM(Interior buried Permanent Magnet Synchronous Motor) has been adopted to meet the locomotive driving specification. In this paper, the design of IPMSM satisfying driving specifications for the direct drive has been performed using the advanced F.E.M.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.249-254
• /
• 2005

This paper presents a system-on-a-chip (SOC) design for digital TV. The single LSI incorporates almost all essential parts such as CPU, ISO/IEC 11172/13818 system/audio/video decoders, a video post-processor, a graphics/OSD processor and a display processor. It has analog IP's inside such as video DACs, an audio PLL, and a system PLL to reduce the system-level implementation cost. Descramblers and Smart Card interface are included to support widely used conditional access systems. The video decoder can decode two video streams simultaneously. The DSP-based audio decoder can process various audio coding specifications. The functional blocks for video quality enhancement also form outstanding features of this SoC. The SoC supports world-wide major DTV services including ATSC, ARIB, DVB, and DIRECTV.