• 대한기계학회논문집A
• /
• 제38권4호
• /
• pp.371-377
• /
• 2014

조직 공학에 있어 인공지지체는 손상된 조직 및 기관의 기능을 재생하기 위한 거푸집으로 제공되며 3 차원 구조물이다. 인공지지체의 재료 중에서 폴리카프로락톤(Polycaprolactone, PCL)과 삼인산칼슘(${\beta}$-tricalcium phosphate, ${\beta}$-TCP)은 생분해성과 생체적합성을 가지고 있다. 본 연구에서는 다축 인공지지체 제작 시스템을 이용하여 3 차원 PCL, blended PCL(60 wt %)/${\beta}$-TCP(40 wt %), 그리고 ${\beta}$-TCP 인공지지체를 제작하였다. 제작된 인공지지체는 주사전자현미경 분석을 통해 $600{\pm}20{\mu}m$의 공극 크기로 잘 제작되었다. 기계적 특성 평가를 통해 3 차원 PCL, blended PCL(60 wt %)/${\beta}$-TCP(40 wt %), 그리고 ${\beta}$-TCP 인공지지체의 효과는 분석되었다. 게다가 Saos-2 세포를 이용한 in vitro 연구를 수행하여 세포 증착 및 증식과 같은 세포 거동에 의한 3 차원 인공지지체의 효과를 확인하였다. 요컨대 3D blended PCL(60 wt %)/${\beta}$-TCP(40 wt %) 인공지지체가 압축 강도와 생체적합성 그리고 골전도성에 있어서 인체의 해면골에 더욱 적합하였다. 따라서 3D 인공지지체의 제작에 있어 PCL과 ${\beta}$-TCP를 혼합하는 것은 효과적인 골 재생을 위해 촉망되는 전략이 될 것이다.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.6-15
• /
• 2020

This study examined the structural behaviors and ultimate loads of assembled system scaffolds by load tests. Considering the number of bay and bracing installation, four specimens were tested. The bays were divided into 1 bay and 2 bays, with and without the bracing member installed. Failure modes and horizontal displacements show that the whole column buckled without showing no point of inflection in the column, regardless of whether or not braces were installed. Thus, the current design method of selecting the vertical spacing between the horizontal members of the system scaffold as the effective buckling length underestimates the effective buckling length. In case of 1 bay specimens, the ultimate loads between specimens with and with bracing members are similar. However, in case of 2 bay specimens, the specimen with bracing members shows the increased ultimate load of 36% compared with that without bracing members. In addition, as the number of bays in the system scaffold increases, the ultimate load of the unit vertical column increases in case of the specimen with bracing installation. However, in the specimen without bracing members, the ultimate load of the unit column reduces with the increment of the number of bays due to the torsional buckling. Therefore, it is essential to install bracing members to increase the whole strength of system scaffolds and the ultimate load of the unit column.

• Journal of Microbiology and Biotechnology
• /
• 제26권4호
• /
• pp.710-716
• /
• 2016

Gamma-aminobutyric acid (GABA) is a non-protein amino acid, which is an important inhibitor of neurotransmission in the human brain. GABA is also used as the precursor of biopolymer Nylon-4 production. In this study, the carbon flux from the tricarboxylic acid cycle was directed to the GABA shunt pathway for the production of GABA from glucose. The GABA shunt enzymes succinate-semialdehyde dehydrogenase (GabD) and GABA aminotransferase (GabT) were co-localized along with the GABA transporter (GadC) by using a synthetic scaffold complex. The co-localized enzyme scaffold complex produced 0.71 g/l of GABA from 10 g/l of glucose. Inactivation of competing metabolic pathways in mutant E. coli strains XBM1 and XBM6 increased GABA production 13% to reach 0.80 g/l GABA by the enzymes co-localized and expressed in the mutant strains. The recombinant E. coli system developed in this study demonstrated the possibility of the pathway of the GABA shunt as a novel GABA production pathway.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.153-159
• /
• 2010

Recently, it has been reported that mechanical stimulation takes a role in improving cell growth. Also, became generally known that skeletal system as bone or cartilage tissues take influence of compression loading. In this study, we fabricated a custom-made bioreactor and analyzed that conditions of compressive loading would influence cell growth. To compare the effect of intermittent compressive loading on cell-encapsulated agarose scaffold, we cultured preosteoblast cell (MC3T3-E1 cells) statically and dynamically. And dynamic culture conditions were produced by changing parameters such as the iteration time and interval delay time. Also, cellencapsulated agarose scaffold were subjected to 10 % dynamic compressive strain at 1㎐ frequency for 7 days. After cell culture, cell proliferation was assessed with PI stain assay for fluorescence images and flow cytometry (FACS).

• 한국구조물진단유지관리공학회지
• /
• 제17권2호
• /
• pp.57-64
• /
• 2013

• Journal of Periodontal and Implant Science
• /
• 제41권2호
• /
• pp.73-78
• /
• 2011

Purpose: For periodontal tissue engineering, it is a primary requisite and a challenge to select the optimum types of cells, properties of scaffold, and growth factor combination to reconstruct a specific tissue in its natural form and with the appropriate function. Owing to fundamental disadvantages associated with using a two-dimensional substrate, several methods of seeding cells into three-dimensional scaffolds have been reported and the authors have asserted its usefulness and effectiveness. In this study, we explore the cell attachment of periodontal ligament fibroblasts on nanohydroxyapatite (n-HA) scaffold using avidin biotin binding system (ABBS). Methods: Human periodontal ligament fibroblasts were isolated from the health tooth extracted for the purpose of orthodontic procedure. HA nanoparticles were prepared and $Ca(NO_3)_2-_4H_2O$ and $(OC_2H_5)_3P$ were selected as precursors of HA sol. The final scaffold was 8 mm in diameter and 3 mm in height disk with porosity value of 81.55%. $1{\times}10^5$ periodontal ligament fibroblasts were applied to each scaffold. The cells were seeded into scaffolds by static, agitating and ABBS seeding method. Results: The number of periodontal ligament fibroblasts attached was greater for ABBS seeding method than for static or agitating method (P<0.05). No meaningful difference has been observed among seeding methods with scanning electron microscopy images. However, increased strength of cell attachment of ABBS could be deduced from the high affinity between avidin and biotin ($Kd=10^{-15}\;M$). Conclusions: The high-affinity ABBS enhances the ability of periodontal ligament fibroblasts to attach to three-dimensionally constructed n-HA scaffold.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1273-1281
• /
• 2014

조직공학은 손상된 골 조직 및 장기를 복원, 재생, 그리고 복구할 수 있는 잠재력을 가진 새로운 학문 분야이다. 인산칼슘계 세라믹스인 삼인산칼슘과 수산회인회석은 골 조직 재생을 위해 골전도성과 생체적합성의 특성을 가진 우수한 재료로 알려져 있다. 본 연구에서, 혼합 용액 구조물은 적층 및 히터장치를 기반으로 한 압출 적층 조형 시스템을 이용하여 제작되었다. 바이오 세라믹 인공지지체는 $1,300^{\circ}C$의 고온에서 소결되었고, 또한 형태학적인 특성은 주사전자현미경을 통해 분석되었다. 게다가, TCP/HA 의 혼합비율에 따른 미세구조물과 수축률에 대한 효과는 연구되었다. 인공지지체의 기계적 특성은 1 mm/min 의 크로스헤드 속도로 압축 시험기를 통해 측정되었고, 인공지지체의 세포 증식평가를 위해 MG-63 세포를 이용하였다. 본 연구의 결과는 혼합된 TCP(75 wt%)/HA(25 wt%) 인공지지체가 골 조직 재생을 위해 적합한 인공지지체라는 것을 제안한다.

• 대한인간공학회지
• /
• 제29권3호
• /
• pp.347-356
• /
• 2010

The purpose of this study is to analyze the spine stability by comparing muscle activation in various scaffold working conditions. The independent working conditions were designed by two levels of working height, existence and absence of safety handrail, and the two levels of expertise. The corresponding activities of the agonist and antagonist muscles of spine were simultaneously recorded by using EMG. As results, novice worker showed increased muscle activity while doing the task on the 2nd floor, absence of handrail. And expert showed the increase of co-contraction while working on the 2nd floor without handrail. Such co-contraction was found to increase the spine stability when the working condition become risky. On the other hand, the co-contraction was prolonged, the spine muscle fatique and disc pressure could be increased, which would increase the risk of musculo-skeletal disorder. The results of co-contraction in this study indicates that the motor control system responds to maintain the stability of the spine particularly when workers cognitively recognize the danger of falling or imbalance. This study also quantitatively accounted for the biomechanical cause of LBP among workers who has to prevent themselves from falling. Therefore, if can be said that safe environment preventing falling can also prevent workers from MSDs as well. Such knowledge can be applied to design ergonomic workplace environment as well as movable scaffold.

• 대한기계학회논문집B
• /
• 제37권7호
• /
• pp.669-674
• /
• 2013

최근 생체모사 융모는 검체검사 및 신약개발 등의 분야에서 비용 및 윤리적 문제를 해결하기 위한 대안으로 부각되고 있다. 본 연구는 생체모사 융모구조 3 차원 하이드로젤 지지체의 효과적인 제작을 위한 고분자 몰드의 가공에 관한 내용을 다루고 있다. 고분자 몰드 제작을 위하여 레이저 가공 및 마이크로 드릴링 가공 프로세스를 적용한 실험이 수행되었다. 가공 프로세스 최적화를 위하여 다양한 조건에서 레이저 가공 및 마이크로 드릴링 실험을 진행하였으며, 이 때 폴리카보네이트(poly-carbonate) 고분자 몰드가 사용되었다. 전자주사현미경 및 광학현미경 관측을 통하여 고분자 몰드 및 생체모사 융모 형상을 관측하였다. 실험결과 생체모사 융모는 레이저 가공 및 마이크로 드릴링을 적용한 경우 모두 적절한 형상을 보이는 것으로 확인되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.34.1-34.8
• /
• 2018

Background: Radiation therapy is widely employed in the treatment of head and neck cancer. Adverse effects of therapeutic irradiation include delayed bone healing after dental extraction or impaired bone regeneration at the irradiated bony defect. Development of a reliable experimental model may be beneficial to study tissue regeneration in the irradiated field. The current study aimed to develop a relevant animal model of post-radiation cranial bone defect. Methods: A lead shielding block was designed for selective external irradiation of the mouse calvaria. Critical-size calvarial defect was created 2 weeks after the irradiation. The defect was filled with a collagen scaffold, with or without incorporation of bone morphogenetic protein 2 (BMP-2) (1 ㎍/ml). The non-irradiated mice treated with or without BMP-2-included scaffold served as control. Four weeks after the surgery, the specimens were harvested and the degree of bone formation was evaluated by histological and radiographical examinations. Results: BMP-2-treated scaffold yielded significant bone regeneration in the mice calvarial defects. However, a single fraction of external irradiation was observed to eliminate the bone regeneration capacity of the BMP-2-incorporated scaffold without influencing the survival of the animals. Conclusion: The current study established an efficient model for post-radiation cranial bone regeneration and can be applied for evaluating the robust bone formation system using various chemokines or agents in unfavorable, demanding radiation-related bone defect models.