• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.440-440
• /
• 2000

In general, camera calibration is consisted of Indoor and Outdoor system. In case of Indoor system, it was optimized experimental condition. However, Outdoor system is different camera parameters for each image that is compared to equaled position. That is, it imply that camera parameters are varied by an environment with light or impulse noise, etc. So we make use of Image sequence because that they provide the more information for each image. In addition to, we use Corresponding line because it has less error than Corresponding point. Corresponding line has also the more information. In this paper, we suggest on-line camera calibration method using the time-varying Image sequence and Corresponding line. So we calculate camera parameters with intrinsic and extrinsic parameters in On-line system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.495-500
• /
• 2003

The vibration of a flexible cantilever tube with nonlinear constraints when it is subjected to flow internally with fluids is examined by experiment and theoretical analysis. These kind of studies have often been performed that finds the existence of chaotic motion. In this paper, the important parameters of the system leading to such a chaotic motion such as Young's modulus and coefficient of viscoelasticity in tube material are discussed. The parameters are investigated by means of a system identification so that comparisons are made between numerical analysis using the parameters of a handbook and the experimental results. The chaotic region led by several period-doubling bifurcations beyond the Hopf bifurcation is also re-established with phase portraits and bifurcation diagram so that one can define optimal parameters for system design.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1992.10a
• /
• pp.8-8
• /
• 1992

Through a simulation experiment, often an experimenter is concerned with estimating the system parameters of the linear model consisting of m design points from the outputs oft the simulation model. To improve the estimation of the system parameters and reliability of these estimators, appropriate simulation techniques have been developed. For the first order linear model, Schruben and Margolin (1978) exploited the random number assignment rules which uses a combination of common random numbers and antithetic streams in a simulation experiment designed to estimate the system parameters when the design matrix of simulation model admits orthogonal blocking into two blocks. Nozari, Arnold and Pegden (1984) developed a method for appliying the method of control variates to the situation of the linear model having multiple design points. This talk deals with a different way of utilizing controls under the correlation induction strategy of Schruben and Margolin's to improve the simulation efficiency, and presents a procedure for obtaining the estimators of the system parameters analytically. Simulation results on a selected simulation model indicate a promising evidence that a proposed method may yield better results than Schruben and Margolin's method.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.112-122
• /
• 1996

In order to monitior machine tool condition and diagnose alarm states due to electrical and mechanical faults, and expert system using diagnostic parameters of NC machine tools was developed. A model-based knowledge base was constructed via searching and comparing procedures of diagnostic parameters and state parameters of the machine tool. Diagnostic monitoring results generate through a successive type inference engine were graphically displayed on the screen of the console. The validity and reliability of the expert system was rcrified on a vertical machining center equipped with FANUC OMC through a series of experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.170-174
• /
• 2005

A numerical system to extract effective elastic properties of polycrystalline thin-films for MEMS devices is developed. In this system, the statistical model based on lattice system is used for modeling the microstructure evolution simulation and the key kinetics parameters of given micrograph, grain distributions and deposition process can be extracted by inverse method proposed in the system. In this work, effects of kinetics parameters on the extraction of effective elastic properties of polycrystalline thin-films are studied by using statistical method. Effects of the fraction of the potential site($f_p$) among the parameters for deposition process of microstructure on the extraction of effective elastic properties of polycrystalline thin-films are investigated. For this research, polysilicon is applied to this system as the polycrystalline thin-films.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.65-76
• /
• 2003

The analysis of cow body parameters is important to provide some useful information fur cow management and cow evaluation. Present methods give many stresses to cows because they are invasive and constrain cow postures during measurement of body parameters. This study was conducted to develop the stereo vision system fur non-invasive analysis of cow body features. Body feature parameters of 16 heads at two farms(A, B) were measured using scales and nineteen stereo images of them with walking postures were captured under outdoor illumination. In this study, the camera calibration and inverse perspective transformation technique was established fer the stereo vision system. Two calibration results were presented for farm A and fm B, respectively because setup distances from camera to cow were 510 cm at farm A and 630cm at farm B. Calibration error values fer the stereo vision system were within 2 cm for farm A and less than 4.9 cm for farm B. Eleven feature points of cow body were extracted on stereo images interactively and five assistant points were determined by computer program. 3D world coordinates for these 15 points were calculated by computer program and also used for calculation of cow body parameters such as withers height. pelvic arch height. body length. slope body length. chest depth and chest width. Measured errors for body parameters were less than 10% for most cows. For a few cow. measured errors for slope body length and chest width were more than 10% due to searching errors fer their feature points at inside-body positions. Equation for chest girth estimated by chest depth and chest width was presented. Maximum of estimated error fur chest girth was within 10% of real values and mean value of estimated error was 8.2cm. The analysis of cow body parameters using stereo vision system were successful although body shape on the binocular stereo image was distorted due to cow movements.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.494-510
• /
• 2019

Underwater acoustic communication channel parameters consist of impulse response, delay spreading, scattering function, coherence bandwidth, frequency selective fading, coherence time and time variant magnitude fading statistics on which communication system modem and channel coding are designed. These parameters are influenced by sound velocity profile, platform motion and sea surface roughness in given acoustical oceanography condition. In this paper, channel model based on phasor, channel simulator, measurement and analysis method of channel parameters are given in a fixed source-to-receiver system and the parameters are analyzed using shallow water experimental data. For two different source-to-receiver ranges of 300 m and 600 m, the parameters are characterized by three multipaths such as a direct, a surface reflection path with time variant scattering and a bottom reflection path. The results present a channel modelling method of a fixed source source-to-receiver system, channel parameters measurement and analysis methods and a system design and performance assessment method in shallow water.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.81-87
• /
• 1991

To examine the effect of the individual operational variables on extrusion process, test trials of the fractional factorial design of the three process variables at three levels, including feed rate, screw speed and die openings, were carried out by using a laboratory scale twin-screw extruder with three different screw configuration for corn grit with the water addition fixed at 15% of the powder feed rate. As the increase of feed rate, while extrusion temperature(ET), specific mechanical energy input (SME), and residence time(RT) were showed the tendency to decrease, extrusion pressure(EP) was increased and as the increase of screw speed, ET, SME and EP were showed the tendency to increase, but RT was decreased. However, as increase the number of die hole, all system parameters were showed the tendency to decrease. The influence of the change in each process parameters was increased as the increase of the number of reverse element in screw configuration. In case of using the screw configuration with increasing number of reverse element at the condition of same process parameters, ET, SME and RT was increased, but EP was decreased. The functional relationships of the system parameters to the process parameters can be quantified by using multiple regression equations(mostly R-sq>0.90) and maped on suface response diagrams to expedite evaluation.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.3
• /
• pp.195-200
• /
• 2012

To steer a camera is done based on system parameters of the vision system. However, the system parameters when they are used might be different from those when they were measured. As one method to compensate for this problem, this research proposes a gaze-steering method based on LMI(Linear Matrix Inequality) that is robust to variations in the system parameters of the vision system. Simulation results show that the proposed method produces less gaze-tracking error than a contemporary linear method and more stable gaze-tracking error than a contemporary nonlinear method. Moreover, the proposed method is fast enough for realtime processing.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.898-901
• /
• 1988

Up to now, using adaptive control method, Identification deals with system whose entire state variables and prameters are accessible for measurement. In practical situations, all the state variables cannot be measured and it is impossible to directly apply since the parameters of the system are unknown. Therefore, in this paper, using only input-output data, such a model of the system is not available since the parameters of the system are unknown. this leads to the concept of an adptive observer in which both the parameters and the state variable of the system are identified simultaniously. Lyapunov's direct method and Kalman-Yakubovich (K-Y) lemma are employed to ensure the stability of this schemes. The feature is that the signal and adaptive gain which is generated from filter is imposed upon feedback vector and then state variables and the unknown parameters can be identified. To show the usefulness of the proposed schemes, computer simulation result of unknown second-order system shows the effectiveness of the proposed schems.