• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.1-8
• /
• 2009

본 연구는 기존의 버스 운영계획모형을 시스템 다이나믹스(System Dynamics : SD) 관점에서 검토하는 것을 주된 목적으로 하고 있다. 결정변수들 간의 선형적 관계에 기초한 교��비용모델에 SD관점을 적용하여 순환적 관계로의 재구성을 시도하였으며, 그 결과물로 최적배차간격모형의 인과지도(Causal Loop Diagram)을 제시하였다. 또한 계량적 시뮬레이션이 가능한 저유량 인과지도(Stock & Flow Diagram)을 작성하여 시뮬레이션 결과의 의미를 논의하였다. 연구결과, 시뮬레이션에 적용한 수식이 기존의 교통비용모형에 토대를 두고 있기 때문에 시뮬레이션 결과가 기존의 연구와 큰 차이를 보이지 않았다.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.8-15
• /
• 2012

GO-FLOW기법은 시스템이 정상적으로 작동할 가능성을 평가할 수 있는 기법으로써 신호선과 연산자를 사용하여 시스템을 GO-FLOW Chart로 모델화하고, 이 GO-FLOW Chart를 순차적으로 해석하여 시스템의 신뢰도를 평가하는 기법이다. 그러나 GO-FLOW기법은 1개의 시스템 구성요소를 여러 개의 연산자로 모델링하므로 시스템 흐름도와 상이한 GO-FLOW Chart가 작성될 수 있고, 시간점을 지정하여 시간을 모델링하므로 실제 운전시간에 따른 신뢰도 변화를 평가하기 어렵다. 따라서 본 연구에서는 구성요소의 기능(정상/고장)을 기준으로 시스템의 신뢰도를 평가하는 기법을 개발하였다. 본 기법은 구성요소의 운전상태와 상관없이 그 기능을 유지할 가능성을 기준으로 시스템의 신뢰도를 평가하며, 1개의 구성요소는 1개의 연산자로 모델링하므로 시스템 흐름도와 거의 유사한 모델도를 작성할 수 있고, 실제시간을 반영한 연산자를 사용하여 실제시간에 따른 시스템의 신뢰도를 쉽게 평가할 수 있다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.157-164
• /
• 2008

The temperature-entropy diagram of water or vapor displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. On general T-s chart of water, there are temperature, pressure, quality, specific volume, specific enthalpy, specific entropy. However, various state and process values besides above properties can be plotted on T-s diagram. In this study, we developed the software drawing twenty six kinds of properties, that is temperature, pressure, quality, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, coefficient of viscosity, kinematic coefficient of viscosity, thermal conductivity, prandtl number, ion product, static dielectric constant, isentropic exponent, velocity of sound, joule-thomson coefficient, pressure coefficient, volumetric coefficient of expansion, isentropic compressibility, and isothermal compressibility. Also, this software can analyze and print the system values of mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, and reversible work. Additionally, this software support the functions such as MS-Power Point.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.211-218
• /
• 2001

This paper introduces a method of constructing expert systems in an integrated environment for automatic software design. This integrated environment may be applicable from top-level system architecture design, data flow diagram design down to flow chart and coding. The system is integrated with three CASE tools, FSD (Functional Structure Diagram), DFD (Data Flow Diagram) and structured chart PAD (Problem Analysis Diagram), and respective expert systems with automatic design capability by reusing past design. The construction way of these expert systems is based on systematic acquisition of design knowledge stemmed from a systematic design work process of well-matured developers. The design knowledge is automatically acquired from respective documents and stored in the respective knowledge bases. By reusing it, a similar software system may be designed automatically. In order to develop these expert systems in a short period, these design knowledge is expressed by the unified frame structure, functions of th expert system units are partitioned mono-functions and then standardized components. As a result, the design cost of an expert system can be reduced to standard work procedures. Another feature of this paper is to introduce the integrated environment for automatic software design. This system features an essentially zero start-up cost for automatic design resulting in substantial saving of design man-hours in the resulting in substantial saving of design man-hours in the design life cycle, and the expected increase in software productivity after enough design experiences are accumulated.

• Journal of Multimedia Information System
• /
• 제3권4호
• /
• pp.161-168
• /
• 2016

In this paper, a power flow simulator, which visualizes power flow and system configuration, is proposed and implemented. Generally, it is necessary to prepare a text file with power-system descriptions, which is one of the barriers for power-flow simulations. The proposed simulator has a function of automatic generations of IEEE common data format files from user-drawn power-system diagrams. Therefore, it is possible for users to carry out simulations only by drawing power system on display. In addition, the proposed simulator also has a function that power-system diagram is illustrated automatically from an IEEE common data format file. By using this function, it is possible to visualize amounts and directions of power flows on the bus-system diagram, which helps users to comprehend network dynamics intuitively. Because the proposed simulator allows including renewable-resource generators in power systems, it is useful to evaluate the power distribution system. It is shown in this paper that the proposed simulator can make IEEE common data format files correctly and illustrate intuitive power flow.

• 한국ITS학회 논문지
• /
• 제21권2호
• /
• pp.17-32
• /
• 2022

본 연구에서는 개별 차량의 차두 시간(time headway) 정보를 활용하여 고속도로 환경에서의 단일 링크에 대한 교통류 모형(flow-density diagram)을 추정하는 방법에 대해 탐구한다. 차두 시간 기반 교통류 모형(empirical flow-density diagram) 연구를 위해 차량용 비전 센서가 탑재된 실험 차량에서 9개월동안 수집된 데이터의 전처리 및 GIS 기반 맵 매칭을 수행한다. 기존의 교통류 모델식을 활용한 차두 시간 기반 교통류 모형(empirical flow-density diagram)의 검증을 위해, 차량 검지기 기반의 VDS(Vehicle Detection System) 데이터(loop detection traffic data) 기반 교통류 모형과 결과 비교 및 분석을 수행한다. 차두 시간 기반 교통류 모형의 추정 오차 원인을 분석하기 위해 각 교통류 모형의 차두 시간 및 차두 거리의 확률분포와 단위시간 교통량과 차량 밀도의 표준편차를 활용하였다. 분석 결과 링크 내 제한된 샘플 차량 대수 및 수집 데이터에 대한 주행환경 편향성이 추정 오차의 주된 요인이며. 이에 따른 추정 오차 개선을 위한 방법에 대해 제안한다.

• International Journal of Fluid Machinery and Systems
• /
• 제8권3호
• /
• pp.169-182
• /
• 2015

When simulating the dynamic behaviour of a hydro power plant, it is essential to have a good representation of the turbine behaviour. The pressure transients in the system occurs because the flow changes, which the turbine defines. The flow through the turbine is a function of the pressure, the speed of rotation and the wicket gate opening and is, most often described in a performance diagram or Hill diagram. In the Hill diagram, the efficiency is drawn like contour lines, hence the name. A turbines Hill diagram is obtained by performance tests on scaled model in a laboratory. However, system dynamic simulations have to be performed in the early stage of a project, before the turbine manufacturer has been chosen and the Hill diagram is known. Therefore one have to rely on diagrams for a turbine with similar speed number. The Hill diagram is drawn through measured points, so for using the diagram in a simulation program, one have to iterate in the diagram based on curve fitting of the measured points. This paper describes an alternative method. By means of the Euler turbine equation, it is possible to set up two differential equations which represents the turbine performance with good enough accuracy for the dynamic simulations. The only input is the turbine's main geometry, the runner blade in- and outlet angle and the guide vane angle at best efficiency point of operation (BEP). In the paper, simulated turbine characteristics for a high head Francis turbine, and for a reversible pump turbine are compared with laboratory measured characteristics.

• 대한산업공학회지
• /
• 제14권2호
• /
• pp.71-80
• /
• 1988

The primary purpose of this study is to develop an automation tool capable of converting the specification of structured analysis into that of structured design. Structured Analysis and Structured Design Language (SASDL) is a computer-aided description language based on ERA model and particulariged by ISLDM/SEM. The automation tool utilizes the specifications of data flow diagram described in SASDL to produce their corresponding SASDL specification of structure chart. The main idea behind the automatic conversion process is to categorize the bubbles in data flow diagram and to determine the positions of the bubbles in structure chart according to their categories and the relative locations in data flow diagram. To make the problem into manageable size, the whole system is broken down into separate parts called activity units. A great deal of manual jobs, such as checking processes leveling, checking data derivation of processes, deriving structure chart from data flow diagram, checking any inconsistency between data flow diagram and structure chart and so forth, can be automated by using SASDL and conversion tool. The specification of structure chart derived by conversion tool may be used in an initial step of design to be refined by SASDL users.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.211-213
• /
• 1998

This paper introduces the additional remote monitoring and remote setting functions needed to operate the distribution automation system effectively. we compare the additional functions with the old functions. The remote setting of minimum trip value of fault indicator is an example of additional function. It saves time and line-man's power. Also this paper describes the data transmission flow diagram for operation of distribution automation system using wireless communication method.

• 한국항공운항학회지
• /
• 제30권4호
• /
• pp.65-75
• /
• 2022

This study aims to forecast of Air Passenger Demand between South Korea and North Korea using the system dynamics analysis methodology that is based on the system thinking. System dynamics is not only a tool that makes the systematic thought to a model but also a computer program-based analysis methodology that mathematically models the system varying according to time variation. This study analyzed the causal relationship based on the interrelation among variables and structured them by considering various variables that affect aviation cooperation from the perspective of Air passenger demand forecasting. In addition, based on the causal relationship between variables, this study also completed the causal loop diagram that forms a feedback loop, constructed the stock-flow diagram of Inter-Korean model using Vensim program. In this study, Air passenger demand was using by the simulation variable value into System Dynamics. This study was difficult to reflect the various variables constituting the North Korea environment, and there is a limit to the occurrence of events in North Korea.