• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.438-443
• /
• 2006

In this paper, We had proposed SDR module, and designed FPGA to compose with channel separation of broadband CDMA signal what have multiple FA. At decomposition and composition process of multiple FA CDMA signal, system only progress decomposition and composition of channel selected by software. Therefore, proposed system can manage base station transceiver system very effectively than the other way what send on all band of multiple CDMA signal. Also, it is possible that system sets again coefficient of each filter because it is consisted of SDR module. Therefore, we can easily control coefficient each filter according to base station transceiver system environment.

• 반도체디스플레이기술학회지
• /
• 제4권4호
• /
• pp.27-31
• /
• 2005

This article contains the development of FPC bonder that used for repair or trial product. Nowadays, in FPO module process (including PDP) accept the thermo-compress bonding method when attach FPC(Flexible Printed Circuit Board), TCP(Tape Carrier Package) and COF(Chip on the FPC) by ACF(Anisotropic Conductive Film). This system consists of ACF attachment part, pre-bonding part, main bonding part, loading / unloading part. This composition is a stand-alone system, not an in-line system. Hereafter, this composition should be developing into in-line system in all area of FPD industry.

• 한국시스템다이내믹스연구
• /
• 제7권2호
• /
• pp.149-170
• /
• 2006

In this paper, an energy-economy-environment dynamic simulation model was developed to using system dynamics methodology. It describes current energy-economy-environment systems and forecasts changes caused by levying of carbon tax. The model is composed of three modules: an energy module, an economic module and an environmental module. Variables are interrelated in each module, and three modules are linked by several linkage variables. Setting up the linkage variables is an important factor for the composition of the model. The simulation result shows a change of the national GDP, usage of energy, and $CO_2$ emissions under levying and reinvestment of carbon tax considering various scenarios for the charging cost.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.557-562
• /
• 2003

최근 세계 시장은 기업 간의 경쟁이 격화됨에 따라 비즈니스의 전 영역을 지원할 수 있는 강력한 경영정보시스템을 필요로 하고 있다. 이러한 추세에 따라 최근 ERP(전사적자원관리시스템)를 도입하여 경영정보시스템을 구축하는 기업이 날로 증가하고 있다. 이에 본 연구에서는 ERP에 대한 이론적 고찰과 사례연구 등을 통해 해운기업에 맞는 ERP 모듈 구성 방향을 제시하였다.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.194-201
• /
• 2014

To increase the capacity of secondary cells, an appropriate serial composition of the battery modules is essential. The unbalance that may occur due to the series connection in such a serial composition is the main cause for declines in the efficiency and performance of batteries. Various studies have been conducted on the use of a passive or active topology to eliminate the unbalance from the series circuit of battery modules. Most topologies consist of a complex structure in which the Battery Management System (BMS) detects the voltage of each module and establishes the voltage balancing in the independent electrical power converters installed on each module by comparing the module voltage. This study proposes a new magnetic flux sharing type DC/DC converter topology in order to remove voltage unbalances from batteries. The proposed topology is characterized by a design in which all of the DC/DC convertor outputs connected to the modules converge into a single transformer. In this structure, by taking a form in which all of the battery balancing type converters share magnetic flux through a single harmonic wave transformer, all of the converter voltages automatically converge to the same voltage. This paper attempts to analyze the dynamic properties of the proposed circuit by using a Programmable Synthesizer Interface Module (PSIM), which is useful for power electronics analysis, while also attempting to demonstrate the validity of the proposed circuit through experimental results.

• 한국디지털건축인테리어학회논문집
• /
• 제11권2호
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• 한국농촌건축학회논문집
• /
• 제4권2호
• /
• pp.27-37
• /
• 2002

From the point of tectonic manner which is 'how to build a house' this study considers the characteristics of Kan in Hyangdan(香壇) at Yang-Dong Village. It was analysed with primary elements such as Kan, condition of a site, module, structural system, roofing system and their relationships in spatial and formal composition. Through the analysis, findings were achieved that characteristics of Kan to form a rectangle of 1 to root 2 proportion plan, enable irregularity in usage and regularity in compositional aspect and structural system to achieve intended roof design. In addition, Kan as a module is found to have a relative value that also regulates the whole in structural and aesthetical aspects.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.168-173
• /
• 2008

본 논문에서는 능동 위상 배열 레이다 시스템에 적용 가능한 송수신 모듈을 설계/제작/측정하였다. 송수신 모듈은 능동 위상 배열 시스템에서 배열의 빔 합성으로 TWTA와 유사한 고출력을 획득하면서 TWTA 같은 중앙 집중식 송신기보다 신뢰성이 높고 기계적 빔 조향보다 기민하게 빔 조향을 가능하게 하는 핵심 구성품이다. 제안된 송수신 모듈은 물리적으로 Brick구조이며, 전기적으로 common leg 구조로 구성되어 있다. 또한, 소형화를 위해 하나의 유전체 기판 위에 MCM(Multi Chip Module) 형태로 제작되었으며, 실제 군용 레이다 시스템에 적용 가능한 사양을 선정하여 측정하였고, 측정 결과를 통하여 송수신 모듈의 최적화 설계를 위해 고려해야 하는 사항들을 검토하였다.

• 한국디지털건축인테리어학회논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• 한국음향학회지
• /
• 제22권7호
• /
• pp.592-602
• /
• 2003

본 논문은 오디오를 동반한 방송 서비스에 있어서 기존의 단순 청취형의 오디오 서비스에서 탈피한 대화형의 객체 기반 3차원 오디오 방송 시스템의 구조를 설명한다. 객체기반 3차원 오디오 방송 시스템은 3차원 오디오 입력부, 3차원 오디오 편집/제작부, 3차원 오디오 부호화부, 3차원 오디오 복호화부, 3차원 오디오 장면합성부 및 3차원 오디오 재생부로 구성된다. 오디오 입력부에서는 3차원 배경음 객체와 독립적인 오디오 객체들을 획득한다. 편집/제작부에서는 오디오 객체들에 대한 3차원 음상정위 및 오디오 이미지 생성을 위한 파라미터를 설정하고, 이들을 조합하여 3차원 오디오 장면을 편집/제작한다. 부호화부에서는 장면정보와 오디오 객체들을 부호화하고, 복호화부에서는 오디오 객체들을 복원하고 장면정보를 획득한다. 장면 합성부에서는 장면정보와 오디오 객체들을 이용하여 오디오 장면을 구성한다. 3차원 오디오 재생부에서는 3차원 오디오 객체들 재생하고, 사용자의 제어신호를 이용한 대화형 기능을 구현한다.